Changes:
- Send down BOARDOBJGRP classId to the PMU. Assign each
BOARDOBJ the classId of its parent group which is set
to zero in current implementation. Changed in NVGPU to send
board obj grp classid to PMU.
- Disable IPC VMIN support as pmu-tu10a profile doesn't support.
- Change in clk vf point enumeration types.
- Change in pstate type values.
- Updated ctrl_perf_vfe_var_single_sensed_fuse_ver_vfield_info
NVGPU-PMU interface struct with b_ver_expected_is_mask to send
whether the expected version is single value or should be
interpreted as a bit mask with bits corresponding to
expected versions set.
NVBUG-200593676
NVGPU-5066
Change-Id: I17b172d88f8b74fbf78044caf7f64cd8811f9fb7
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2308533
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In the upstream kernel ACCESS_ONCE is now deprecated with reason as
given in the following related commit:
commit 381f20fceba8e ("security: use READ_ONCE instead of deprecated
ACCESS_ONCE")
ACCESS_ONCE() does not work reliably on non-scalar types. For
example gcc 4.6 and 4.7 might remove the volatile tag for such
accesses during the SRA (scalar replacement of aggregates) step.
Replace usages of ACCESS_ONCE with READ_ONCE and WRITE_ONCE in nvgpu.
Bug 2834141
Change-Id: I9904c49e1a4d7b17ed2fe54360051d08595a2982
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2294096
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
Reviewed-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Current clk unit has multiple header files under include folder.
This has combination of public struct which is accessed outside the
unit and private struct which is accessed within clk unit.
This patch segregates them based on their accessibility.
All private items are moved into ucode_clk_inf.h from include which only
clk can access.
All public items are moved into include/clk.h which other units can
access and removed the clk_xxx.h files
NVGPU-4689
Change-Id: I469270ae539e09a3f6fe6187207791732407863e
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2298220
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Current clk unit has multiple header files under pmuif folder.
This has combination of public struct which is accessed outside the
unit and private struct which is accessed within clk unit.
This patch segregates them based on their accessibility.
All private items are moved into ucode_clk_inf.h from pmuif which only
clk can access.
All public items are moved into include/clk.h which other units can
access
This will help in documentation of items for public items.
NVGPU-4491
Change-Id: Iccb0571e05ecb3cb13363390bed8c7214409b543
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2292318
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Current volt unit has multiple header files under pmuif folder.
This has combination of public struct which is accessed outside the
unit and private struct which is accessed within volt unit.
This patch segregates them based on their accessibility.
All private items are moved into ucode_volt_inf.h from pmuif which only
volt can access.
All public items are moved into include/volt.h which other units can
access
This will help in documentation of items for public items.
NVGPU-4492
Change-Id: Id40bf4922408a55f1e67d071be726839ac57718f
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2289114
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Created perf.h file and moved all private functions
and structures into it
-Created single sw_setup/pmu_setup for whole perf
unit
-Changed public function and structure names as per
standard format
-Deleted lpwr unit specific file from make file as
it is no longer used
-Removed support_vfe and support_changeseq flags as
it is no longer used
-Removed clk_set_boot_fll_clks_per_clk_domain function
as it is no longer used for tu10a
-Removed perf unit headers from pmuif folder
NVGPU-4448
Change-Id: Ia29e5b5a1a960b5474a929d8797542bf6c0eccf1
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2283587
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch removes dependency between pmu.clk and hal.clk.
Below is the implementation.
*Init the clk domains inside pmu.clk unit.
*Set this in a member variable and send it to hal.clk unit
*Use this to determine the valid clock domains and read the
monitor registers for each valid domains.
*Return the domain with error code.
*With this all the clk domain data is removed from hal.clk and
only pmu.clk uses it as it owns it.
JIRA NVGPU-4491
Change-Id: Ie57b2472cfaacfd2ce43ac7f95702bd95fb8bbaa
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2272416
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Created ucode_perf_change_seq_inf.h and moved all
change_seq interface structs and MACROs
-Moved nvgpu_clk_set_req_fll_clk_ps35 from clk unit
to change_seq unit
-Removed MACROs and includes which are not needed
NVGPU-4448
Change-Id: I04ab32cbc9a1fc827f3360a8ea0f367019981823
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2266051
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Created ucode_perf_pstate_inf.h and moved all
pstate interface structs and MACROs.
-Created nvgpu_perf_pstate_get_lpwr_index for getting
lpwr index
-Created nvgpu_clk_domain_get_from_index for getting
clk_domain from index
-Removed pstate_get_status code which is not needed
for tu10a profile
-Removed MACROs and includes which are not needed
NVGPU-4448
Change-Id: I516816a1d92a60a91ea479cb9c334d332d3d7a89
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2264716
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Created ucode_perf_vfe_inf.h and moved all VFE
interface structs and MACROs into this header
-Created nvgpu_clk_fll_get_fmargin_idx to get
freq margin index
-Created nvgpu_vfe_var_get_s_param to read s_param
-Removed MACROs and header includes which are
not needed
NVGPU-4448
Change-Id: I89f946d555bcbc7823665d2a5a761049f7a5e963
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2260150
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add support in nvgpu to parse and get the freq cap from DT.
The patch does below
Parse the DT and gets the freq cap value during probe.
During clk_arb init compare this with P0.Max and takes the lowest.
Send change_seq with the new value and set dgpu freq.
Use the lowest for "get points","get default","set VF".
Bug 200556366
Change-Id: Ie10243f9bf83cb5ae07ebcc4cdc8efaffa56c309
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2204644
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently after sending change seq RPC, nvgpu waits for a fixed time
of 20ms.
This CL replaces this with pmu_wait_message_cond, which will return
immediately after getting change seq completion event.
Also added debug fs node to get the change seq execution time.
Bug 200545366
Change-Id: Iba283f65d4949858be9cbff88de4d21a8c92ff81
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2202423
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Nvgpu uses RPC to get target voltage for a freq, though this gets
the latest Voltage, there could be mismatch b/w data in nvgpu & PMU.
To make it consistent, use the local VF table for getting the voltage.
Also the slave ratio calculation is inaccurate due to quantization.
So instead of calculating, use the slave ratio from parsed vbios table.
Bug 200545403
Change-Id: Ibb064f2a0f5eba77166e2b3f9868da9e3fcc7193
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2183546
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Added version and reseved elements in
nv_pmu_clk_clk_vin_device_boardobjgrp_set_header struct.
- Added volt_rail_idx, por_override_mode and override_mode
elements are added in nv_pmu_clk_clk_vin_device_boardobj_set
struct.
- Implemented parsing the above elements from vbios table.
- Moved from cmd to rpc in vin_load function.
- Changed the global macros of clk domain which matches to
PMU firmware for easy reference.
NVGPU-3743
Change-Id: I0189548fce19d65193203fbf6317c4a04147bf5a
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2163135
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Some functions are not accessing hardware directly
but are being called using HAL ops: For example
.init = gv100_bios_init,
.preos_wait_for_halt = gv100_bios_preos_wait_for_halt,
.preos_reload_check = gv100_bios_preos_reload_check,
.devinit = gp106_bios_devinit,
.preos = gp106_bios_preos,
.verify_devinit = NULL,
This was being called as:
g->ops.bios.init(g)
g->ops.bios.preos_wait_for_halt(g)
g->ops.bios.preos_reload_check(g)
g->ops.bios.preos(g)
g->ops.bios.devinit(g)
g->ops.bios.verify_devinit(g)
Change the function access by using sw ops, like:
Create new function: nvgpu_bios_sw_init()
and based on hardware chip call the chip specific
bios sw init function: nvgpu_gv100_bios_sw_init()
and nvgpu_tu104_bios_sw_init()to assign the sw
ops
JIRA NVGPU-2071
Change-Id: Ibfcd9b225a7bc184737abdd94c2e54190fcd90a0
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2108526
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 2.2 defines dead code as "operations which are executed but
removal of these operations has no effect on program behavior".
Variable initializations violate this rule if initialized value is not
used and replaced.
This patch fixes some of these reported violations.
Jira NVGPU-858
Change-Id: I694517ace8884c78c63f6346e455078d19b70b4d
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110459
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Identifier names used were already used to represent types. Fix those.
for e.g. pwr_channel in nv_pmu_pmgr_pwr_channel_union.
pmu_init_msg identifier name changed to init_msg as that is used to
represent a type.
JIRA NVGPU-3272
Change-Id: I887b66f08df1e00803d872873f6447f563675d44
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2108548
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule-17.7 requires the return value of all functions to be
used. Fix is either to use the return value or change the function
to return void. This patch contains fixes for all 17.7 violations
in the nvgpu.common.pmu.clk.* units.
JIRA NVGPU-3035
Change-Id: I13863f43c6bea76917978a12df091a672a3e5098
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2108887
GVS: Gerrit_Virtual_Submit
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch does the following for boardobjgrpmask unit.
1. Remove unused functions and its pointers.
2. Append public functions with nvgpu.
3. Remove unnecessary inclusion of header files.
4. Make local functions as static.
5. Rename function names to increase readibility.
6. Remove boardobj* from static functions.
Jira NVGPU-1977
Change-Id: Ie6d3bd8f55784d29ae4ba720fb3998487ad2b942
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2107167
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved nvgpu_clk_pmupstate structure from gk20a to
nvgpu_pmu.The aim is to have single pmu structure inside
gk20a, that is "nvgpu_pmu" struct and all the global
structures of all units in PMU should be included in
"nvgpu_pmu" struct.
NVGPU-3220
Change-Id: I531aab568a692c55e640ca2c33aa7508b83a9593
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2104129
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Description:
Present p-state unit handle both pstate boardobj and
initializing all the units. As part of restructuring,
the pstate unit is separated into two units:
1) Perf_pstate: This unit will handle pstate boardobjs.
2) Pmu_pstate: This unit will initialize all the units
which supoort performance states.
Changes:
1) Created pmu_pstate unit.
2) Pstate boardobjs are moved under perf_pstate which
is under perf unit.
NVGPU-1958
Change-Id: I2c428adfe6de4992c9eeda0d4356d30290f6e8a4
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2096339
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
