Use NVGPU_DMA_FORCE_CONTIGUOUS for non-wpr blob alloc.
CPU writes some data to non WPR blob (sysmem). ACR binary executing
from PMU, first copies that data to DMEM and then copies that data into WPR.
Without NVGPU_DMA_FORCE_CONTIGUOUS, secure boot fails due to ACR writing
wrong bootloader data to PMU DMEM.
Bug 200355756
Change-Id: I18982caff62b2e7cbe64ea98c1bb935496cfe91c
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1610491
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Add an alignment check for compressible-kind fixed-address
mappings. If we're using page size smaller than the comptag line
coverage window, the GPU VA and the physical buffer offset must be
aligned in respect to that window.
Bug 1995897
Bug 2011640
Bug 2011668
Change-Id: If68043ee2828d54b9398d77553d10d35cc319236
Signed-off-by: Sami Kiminki <skiminki@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1606439
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For gv11b, configured gfx preemption wfi timeout in usec.
Set timeout unit as usec in gr_gv11b_init_preemption_state.
Used default timeout as 1msec and this timeout value can
be modified through sysfs node:
/sys/devices/gpu.0/gfxp_wfi_timeout_count
For gp10b:
gfxp_wfi_timeout_count is in syclk cycles
For gv11b:
gfxp_wfi_timeout_count is in usec
Bug 2003668
Change-Id: I68d52ce996a83df90b8b3a8164debb07e5cb370f
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1599658
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This CL is as part of phased changes to support NO LSPMU
Changes done are to add new pmu ops :
- setup_apertures
- update_lspmu_cmdline_args
These would be called from pmu op init_falcon_setup_hw
JIRA NVGPU-296
Change-Id: Idbcec5c93ca3150df5c9fb81d65b9fce778cecb8
Signed-off-by: Supriya <ssharatkumar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1589004
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-New fuse ops is added to set NVGPU_SEC_PRIVSECURITY
and NVGPU_SEC_SECUREGPCCS bits in g->enabled_flags
during hal initialization
-For igpu non simulation platforms, fuses are read
to decide if gpu should be allowed to boot or not.
--Do not boot gpu if priv_sec_en is set but wpr_enabled
is not set to 1 or vpr_auto_fetch_disable is not set to 0
--With priv_sec_en set, all falcons have to boot
in LS mode and this needs wpr_enabled set to 1
AND vpr_auto_fetch_disable set to 0. In this case
gmmu tries to pull wpr and vpr settings from tegra mc
Bug 2018223
Change-Id: Iceaa1b0b3214e9a3d6cef5d77a82e034302f748b
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1595454
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove gv11b_init_uncompressed_kind_map(), gv11b_init_kind_attr(), and
the related kind setup code. They are not needed anymore.
While we're doing these changes, remove a redundant assignment of
g->bootstrap_owner in hal_gv100.c.
Bug 1902982
Change-Id: Ib40d8f55cfbfa34143a3765c2b4913926ca021fd
Signed-off-by: Sami Kiminki <skiminki@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1560931
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move fuse override DT handling to Linux code. All the chip specific
fuse override functions did the same thing, so delete the HAL and
call the same function to read the DT overrides on all chips.
Also remove the fuse override functionality from dGPU. There are no
DT entries for PCIe devices, so it would've failed anyway.
JIRA NVGPU-259
Change-Id: Ic672e25090cdfc207d9771ab61b6cf53185113a4
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1593693
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- in the native case, replace calls for init_cyclestats with
the gm20b version, as each chip had identical versions of the code.
- in the virtual case, use the vgpu version of the function in order
to get the new max_css_buffer_size characteristic set to the mempool
size.
JIRA ESRM-54
Bug 200296210
Change-Id: I475876cb392978fb1350ede58e37d0962ae095c3
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1578934
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For SCG to work, smid numbering needs to be done
based on scg performance of tpcs. For gv11b and
gv11b vgpu, reuse gv100 function "gr_gv100_init_sm_id_table"
to do this.
Used local variable "index" to avoid multiple computations in
the function: gr_gv100_init_sm_id_table
index = sm_id + sm
Add deug info for printing initialized gpc/tpc/sm/global_tpc
indexs.
Bug 1842197
Change-Id: Ibf10f47f10a8ca58b86c307a22e159b2cc0d0f43
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1583916
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Added method to load mem unlock binary into
nvdec falcon & execute to perform mem unlock
if VPR enabled.
- Updated .mem_unlock gv100 HAL to point
method gv100_fb_memory_unlock().
- Updated .mem_unlock gv11b HAL to NULL.
- Added vpr info hw registers
- Added nvdec enable hw register
Change-Id: Ia4bf820ae103baede679d300d1d390fd748c919a
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
(cherry picked from commit 2e176ad9d47316bf4d001692a2ae07e6c1fb1ccb)
Reviewed-on: https://git-master.nvidia.com/r/1573101
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Updated following hal functions for css gv11b and reused
them for gv100:
enable_snapshot
disable_snapshot
check_data_available
These changes are needed because of following reasons:
1. Register offsets for perf_pmasys_* are changed
for gv11b/gv100 from gk20a.
2. Updated memory type for perf_pmasys_mem_block_target
based on memory aperture used for hwpm inst_block.
Bug 200327596
Change-Id: I500d17670e2f389d8d0e77884374bcc3504a41f8
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1507546
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Change required for equivalent change on nvgpu. This is required
since a few HALs were added that must be populated for all chips.
This patch adds those HAL definitions for gv11b, gv100, and the
vgpu.
JIRA NVGPU-30
JIRA NVGPU-138
Change-Id: I65374764350a5cacce8624b15d98947fada35a4a
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1579865
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Updated following hal functions for gv11b and reused
them for gv100:
perfbuffer_enable
perfbuffer_disable
These changes are needed because of following reasons:
1. Register offsets for perf_pmasys_* are changed
for gv11b/gv100 from gk20a.
2. Updated memory type for perf_pmasys_mem_block_target
to sys_ncoh_f().
Bug 200327596
Change-Id: Ia672ac561917c8ed36caea9cc7e74b7fc7ce8188
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1571074
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Instead of calling the native HAL init function then adding
multiple layers of modification for VGPU, flatten out the sequence
so that all entry points are set statically and visible in a
single file.
JIRA ESRM-30
Change-Id: I8d277aaccb0e63b2d504e7aba32eb31ef82f4ec0
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1574619
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Richard Zhao <rizhao@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
We right now call gk20a_fifo_tsg_unbind_channel_verify_status() to verify
channel status while unbinding a channel from TSG while closing
Add support to do this verification per-platform and keep this disabled
for vgpu platforms
Bug 200327095
Change-Id: I6e2a6a09c784d24ac49477d5450b7d4b671878e3
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1572369
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new API gv11b_fifo_tsg_verify_status_faulted() and use that as
g->ops.fifo.tsg_verify_status_faulted operation for gv11b/gv100
This API will check if channel has ENG_FAULTED status set, if yes it will clear
CE method buffer in case saved out channel is same as faulted channel
We need to write 0 to method count to invalidate CE method buffer
Also set g->ops.fifo.tsg_verify_status_ctx_reload operation for gv11b/gv100
Bug 200327095
Change-Id: I9d2b0f13faf881b30680219bbcadfd4969c4dff6
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1560643
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Add TSG enable/disable operations for gv11b/gv100
To disable a TSG we continue to use gk20a_disable_tsg()
To enable a TSG add new API gv11b_fifo_enable_tsg() since TSG enable sequence is
different for Volta than previous versions
For Volta it is sufficient to loop over all the channels in TSG and enable them
sequentially
Bug 1739362
Change-Id: Id4b4684959204c6101ceda83487a41fbfcba8b5f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1560642
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reorganize HAL initialization to remove inheritance and construct
the gpu_ops struct at compile time. This patch only covers the
gr sub-module of the gpu_ops struct.
Perform HAL function assignments in hal_gxxxx.c through the
population of a chip-specific copy of gpu_ops.
Jira NVGPU-74
Change-Id: I8feaa95a9830969221f7ac70a5ef61cdf25094c3
Signed-off-by: Sunny He <suhe@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1542988
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Although igpu does not have an FBPA unit, the hardware reports one, and
the ucode leaves space for one in the HWPM context save buffer. So
let NUM_FBPAS reflect this, so that registers that follow this section
in the context buffer are offset properly
JIRA EVLR-1716
Change-Id: I067d5ec3afd356bcb4270fc2b5d12daef2ce3944
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1535274
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reorganize HAL initialization to remove inheritance and construct
the gpu_ops struct at compile time. This patch only covers the
pmu sub-module of the gpu_ops struct.
Perform HAL function assignments in hal_gxxxx.c through the
population of a chip-specific copy of gpu_ops.
Jira NVGPU-74
Change-Id: I3f8a763a7bebf201c2242eecde7ff998aad07d0a
Signed-off-by: Sunny He <suhe@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1530983
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reorganize HAL initialization to remove inheritance and construct
the gpu_ops struct at compile time. This patch only covers the
mm sub-module of the gpu_ops struct.
Perform HAL function assignments in hal_gxxxx.c through the
population of a chip-specific copy of gpu_ops.
Jira NVGPU-74
Change-Id: I5fd295c6473d5b4a6178c0c6be8fcf8f4c33f2e3
Signed-off-by: Sunny He <suhe@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1537754
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reorganize HAL initialization to remove inheritance and construct
the gpu_ops struct at compile time. This patch only covers the
fb sub-module of the gpu_ops struct.
Perform HAL function assignments in hal_gxxxx.c through the
population of a chip-specific copy of gpu_ops.
Jira NVGPU-74
Change-Id: I3fdbf6059ef664caf8d33797a8a5f3f8eb6485bf
Signed-off-by: Sunny He <suhe@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1537748
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reorganize HAL initialization to remove inheritance and construct
the gpu_ops struct at compile time. This patch only covers the
mm sub-module of the gpu_ops struct.
Perform HAL function assignments in hal_gxxxx.c through the
population of a chip-specific copy of gpu_ops.
Jira NVGPU-74
Change-Id: Ic2c7d56e552645f2125d9c60a817967be1e8e765
Signed-off-by: Sunny He <suhe@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1533355
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reorganize HAL initialization to remove inheritance and construct
the gpu_ops struct at compile time. This patch only covers the
fb sub-module of the gpu_ops struct.
Perform HAL function assignments in hal_gxxxx.c through the
population of a chip-specific copy of gpu_ops.
Jira NVGPU-74
Change-Id: I896d90e0dcffc0e133e6902ff9c3eab39c53080d
Signed-off-by: Sunny He <suhe@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1533354
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Update gv11b_get_litter_value:
- add PPC_IN_GPC_BASE
- set all FBPA values to 0, since gv11b does not have an FBPA unit
- error/bug if we fall through to default, for easier debugging
JIRA EVLR-1712
Change-Id: I9a388d6f525e101d4742ade07f972410ec3b2591
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1533192
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Refactor the sync_debugfs LTC HAL op so that the logic to enable
or disable LTC goes to common code nvgpu_ltc_sync_enabled() and
the LTC HAL set_enabled only performs the hardware register access.
Create a new common function nvgpu_init_ltc_support() to initialize
the LTC software variable, and move hardware initialization of LTC to
be called from it.
JIRA NVGPU-62
Change-Id: I7b73625bccd45aefa5694989adbf4a0bbac75fc4
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1529054
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reorganize HAL initialization to remove inheritance and construct
the gpu_ops struct at compile time. This patch only covers the
regops sub-module of the gpu_ops struct.
Perform HAL function assignments in hal_gxxxx.c through the
population of a chip-specific copy of gpu_ops.
Jira NVGPU-74
Change-Id: Ibf9f64ca445691e252b72c2b8fc59edb84e226ce
Signed-off-by: Sunny He <suhe@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1530136
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Tested-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
