Modify read_pending_interrupts hal to report the pending gr interrupt
bit back to isr to process.
semaphore_timeout interrupt bit is removed after gk20a chip.
Remove that bit checking from the isr function.
Remove some static functions for handling interrupt, which only calls
gk20a_gr_set_error_notifier. Call that function directly from isr
JIRA NVGPU-3016
Change-Id: Ic7084f038114fbce6d6b5c10a806dee6280e5c0a
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2092876
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Refactor the ECC code present under gp10b/, gv11b/, and tu104/. To
do this a few things were required:
Firstly, move the ecc related C and H files under the aforementioned
directories over to their new home under hal/gr/ecc/. Also copy over
the ECC HAL code present in gp10b/gp10b.c - not sure why this was
there but it, too, needed to be refactored. Also handle all the
updated header paths and Makefiles to take these movements into
account.
Secondly add a new HAL in GR (gr.ecc) to handle ECC HAL ops. There's
only two: detect and init. init() was copied over from gr and detect
was added so that the common ECC code can call it in a chip agnostic
way. This is required so that the ECC detect can be moved out of the
gp10b init characteristics function.
Lastly update the ECC init flow in the common ecc module to call
detect() right before init().
JIRA NVGPU-3074
Change-Id: Iba1464a904f9a91a45f30902beadf6f912607e40
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2090977
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Simplify the interrupt handling code in gk20a_gr_isr.
There is no need to individually clear the handled interrupt bit.
Clear all interrupt bits set at the end with one register write.
Add two new hals
read_pending_interrupts - read the gr interrupt register
clear_pending_interrupts - write to gr interrupt register the pending ones.
JIRA NVGPU-3016
Change-Id: Iea682524d767d0f9b82d1137a8c0358e65eabade
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2091086
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new hal handle_exceptions in hal.gr.intr
This hal handles all the gr exceptions which involves register read and
write.To keep the code simple, handle gpc_exception outside this hal
as gpc exception involves common intr function call and variables
not needed by other exceptions.
JIRA NVGPU-3016
Change-Id: Ie1fb60e46419ee20a10ac9cfb4874cb6eb3739b9
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2090406
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved fecs_host_int_enable ops from gr to gr falcon.
Created required hals in gm20b and gv11b gr falcon units.
gr_gk20a_fecs_host_int_enable -> gm20b_gr_falcon_fecs_host_int_enable
gr_gv11b_fecs_host_int_enable -> gv11b_gr_falcon_fecs_host_int_enable
JIRA NVGPU-1881
Change-Id: Ice9d5170928068b0447cc4644e6668f7ff75b8d6
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2089316
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved following functionality from gr to gr falcon common
gr_gk20a_init_ctxsw -> nvgpu_gr_falcon_init_ctxsw
gr_gk20a_init_ctx_state -> nvgpu_gr_falcon_init_ctx_state
gk20a_init_gr_bind_fecs_elpg -> nvgpu_gr_falcon_bind_fecs_elpg
Replaced code in gr_gk20a.c by calling corresponding gr falcon common
calls and moved all relevant code to gr falcon unit.
Moved following gr ops from gr to gr falcon:
int (*init_ctx_state)(struct gk20a *g);
Moved functionality from gr to relevant gr falcon hals:
gr_gk20a_init_ctx_state -> gm20b_gr_falcon_init_ctx_state
gr_gp10b_init_ctx_state -> gp10b_gr_falcon_init_ctx_state
JIRA NVGPU-1881
Change-Id: I027e1972a7747275311df99679235804dc0e16fe
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2084391
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move all fecs methods related code to gr falcon unit and handle it
through generic gr.falocn.ctrl_ctxsw hal.
Following methods are moved from gr_gk20a.c to gr falcon unit.
fecs method and corresponding new fecs method def in gr_falcon.h:
gr_fecs_method_push_adr_discover_image_size_v ->
NVGPU_GR_FALCON_METHOD_CTXSW_DISCOVER_IMAGE_SIZE
gr_fecs_method_push_adr_discover_pm_image_size_v ->
NVGPU_GR_FALCON_METHOD_CTXSW_DISCOVER_PM_IMAGE_SIZE
gr_fecs_method_push_adr_discover_reglist_image_size_v ->
NVGPU_GR_FALCON_METHOD_REGLIST_DISCOVER_IMAGE_SIZE
gr_fecs_method_push_adr_set_reglist_bind_instance_v ->
NVGPU_GR_FALCON_METHOD_REGLIST_BIND_INSTANCE
gr_fecs_method_push_adr_set_reglist_virtual_address_v ->
NVGPU_GR_FALCON_METHOD_REGLIST_SET_VIRTUAL_ADDRESS
Following fecs methods are moved from obj_ctx.c to gr falcon unit.
gr_fecs_method_push_adr_bind_pointer_v ->
NVGPU_GR_FALCON_METHOD_ADDRESS_BIND_PTR
gr_fecs_method_push_adr_wfi_golden_save_v ->
NVGPU_GR_FALCON_METHOD_GOLDEN_IMAGE_SAVE
Following fecs methods are moved from gr_gp10b.c to gr falcon unit.
gr_fecs_method_push_adr_discover_preemption_image_size_v ->
NVGPU_GR_FALCON_METHOD_PREEMPT_IMAGE_SIZE
gr_fecs_method_push_adr_configure_interrupt_completion_option_v ->
NVGPU_GR_FALCON_METHOD_CONFIGURE_CTXSW_INTR
Following fecs method is moved from zcull_gm20b.c:
gr_fecs_method_push_adr_discover_zcull_image_size_v ->
NVGPU_GR_FALCON_METHOD_CTXSW_DISCOVER_ZCULL_IMAGE_SIZE
Following fecs method is moved from fecs_trace_gp10b.c:
gr_fecs_method_push_adr_write_timestamp_record_v
-> NVGPU_GR_FALCON_METHOD_FECS_TRACE_FLUSH
Added new HAL in gr falcon for moving fecs_current_ctx_data from
gr_gk20a.c to gr_falcon_gm20b.c.
u32 (*get_fecs_current_ctx_data)(struct gk20a *g,
struct nvgpu_mem *inst_block);
Added overlay for gm20b_gr_falcon_ctrl_ctxsw in newly added in
gr_falcon_gp10b.c for handling gp10b+ specific fecs methods:
gp10b_gr_falcon_ctrl_ctxsw
JIRA NVGPU-1881
Change-Id: I662d06f5176b29e6837d63c25e42de67505d48f5
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2087148
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
New tpc_exception_sm_disable hal to disable and
tpc_exception_sm_enable hal to enable the sm bit in tpc_exception
register.
These hals are added to avoid the register access in common gr code.
JIRA NVGPU-3016
Change-Id: I21634e2cd3b2b8007081e6f7608ec2da9c74813f
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2088311
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added following new hals in gr falcon:
u32 (*get_current_ctx)(struct gk20a *g);
-> to get current context in execution.
u32 (*get_ctx_ptr)(u32 ctx);
-> related ctx_ptr for the context
Updated gr_gk20a.c, gr_gm20b.c, gr_gp10b.c and gr_gv11b.c
to use these new hals.
JIRA NVGPU-1881
Change-Id: I1c1cef8e4b0ca04e3e3218d552b6e8e08fcfa7d0
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2087039
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Change gk20a_gr_nonstall_isr function to hal under hal.gr.intr
Use nvgpu_gr_gpc_offset and nvgpu_gr_tpc_offset call in
gm20b_gr_intr_handle_tex_exception function.
Update gk20a_gr_nonstall_isr call as g->ops.gr.intr.nonstall_isr
JIRA NVGPU-3016
Change-Id: I9ff39cf1a99bf5b3d215cda6bc68fab1ecae51e3
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2088133
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move handle_gcc_exception to hal.gr.intr
Pass g->ecc.gr.gpccs_ecc_corrected_err_count[gpc].counter and
g->ecc.gr.gpccs_ecc_uncorrected_err_count[gpc].counter variable pointers
as function parameter to avoid dereferencing the g->ecc struct
inside the hal function
Update g->ops.gr.handle_gcc_exception to
g->ops.gr.intr.handle_gcc_exception
JIRA NVGPU-3016
Change-Id: Iaac9bd1763673567d8c29258d2f1952d061785a6
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2087199
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move handle_gpc_gpcmmu_exception to hal.gr.intr
Pass g->ecc.gr.mmu_l1tlb_ecc_corrected_err_count[gpc].counter
and g->ecc.gr.mmu_l1tlb_ecc_uncorrected_err_count[gpc].counter pointers
as function parameter to avoid dereferencing g->ecc inside hal function
Update g->ops.gr.handle_gpc_gpcmmu_exception to
g->ops.gr.intr.handle_gpc_gpcmmu_exception
JIRA NVGPU-3016
Change-Id: I9698cf71b568caf8e259996f84b4f26aded865f5
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2087198
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following functions are moved from gr_gk20a.c to common gr_falcon.c
gr_gk20a_disable_ctxsw -> nvgpu_gr_falcon_disable_ctxsw
gr_gk20a_enable_ctxsw -> nvgpu_gr_falcon_enable_ctxsw
gr_gk20a_halt_pipe -> nvgpu_gr_falcon_halt_pipe
Added new gr falcon hal to control ctxsw:
int gm20b_gr_falcon_ctrl_ctxsw(struct gk20a *g, u32 fecs_method,
u32 data, u32 *ret_val)
Parameters:
fecs_method: will be specified by a generic define provided in gr_falcon.h
header.
data: input data parameter (if any), set it to zero, if method did not
require any data input.
ret_val: pointer to expected output.
Added following ops for gr falcon:
int (*halt_pipe)(struct gk20a *g); -> this is moved from gr
int (*disable_ctxsw)(struct gk20a *g);
int (*enable_ctxsw)(struct gk20a *g);
JIRA NVGPU-1881
Change-Id: Idb3b7355b5a0bd3b9bb01f9f424c5d607616f540
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2081308
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move handle_gpc_gpccs_exception hal to hal.gr.intr
Pass g->ecc.gr.gpccs_ecc_corrected_err_count[gpc].counter and
g->ecc.gr.gpccs_ecc_uncorrected_err_count[gpc].counter variable address
as parameter to function to avoid dereferencing g->ecc variable
inside hal function.
Update g->ops.gr.handle_gpc_gpcss_exception call to
g->ops.gr.intr.handle_gpc_gpcss_exception
JIRA NVGPU-3016
Change-Id: I6cab6428eb6785261f34ca21f2ce055a9995b408
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2087197
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new hal to get_tpc_exception to hal.gr.intr
This hal helps to avoid register read from the
common handle_tpc_exception function. Add a new struct to report the
tpc_exception type back to the common code to handle the exception.
JIRA NVGPU-3016
Change-Id: Ib504ade0b06b85cd38ccf166328784bab072573e
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2085387
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new unit common.gr.setup that provides runtime setup interfaces to
other units outside of GR unit or to OS-specific code
Move zcull setup call to this unit.
New unit now exposes nvgpu_gr_setup_bind_ctxsw_zcull() to setup zcull
This API internally calls common.gr.zcull API nvgpu_gr_zcull_ctx_setup()
Add new hal g->ops.gr.setup.bind_ctxsw_zcull() and remove
g->ops.gr.zcull.bind_ctxsw_zcull()
Remove nvgpu_channel_gr_zcull_setup() from channel unit
Also remove ctx/subctx header includes sicne channel code need not
configure zcull
Remove gm20b_gr_bind_ctxsw_zcull() since binding is done from common
code
Jira NVGPU-1886
Change-Id: I6f04d19a8b8c003734702c5f6780a03ffc89b717
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2086602
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In this CL, following ctxsw related code is moved to hal gr falcon.
1. gr_gk20a_wait_ctxsw_ready -> gm20b_gr_falcon_wait_ctxsw_ready
2. gr_gk20a_submit_fecs_method_op ->
gm20b_gr_falcon_submit_fecs_method_op
3. gr_gk20a_submit_fecs_sideband_method_op->
gm20b_gr_falcon_submit_fecs_sideband_method_op
Above functions are populated with following gr.falcon hals and called
from the current code as required:
int (*wait_ctxsw_ready)(struct gk20a *g);
int (*submit_fecs_method_op)(struct gk20a *g,
struct fecs_method_op_gk20a op, bool sleepduringwait);
int (*submit_fecs_sideband_method_op)(struct gk20a *g,
struct fecs_method_op_gk20a op);
Following static function also moved to gr_gk20a.c to hal gr falcon.
gr_gk20a_ctx_wait_ucode -> gm20b_gr_falcon_ctx_wait_ucode
JIRA NVGPU-1881
Change-Id: Icb4238dcacaf46ecfcada8bc8dcdeb68b6278bab
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2085189
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove locally defined timeout call in gr and use common timeout
call.
Replace nvgpu_gr_get_idle_timeout with nvgpu_get_poll_timeout function
Replace following defines to
NVGPU_GR_IDLE_CHECK_DEFAULT_US ---> POLL_DELAY_MIN_US
NVGPU_GR_IDLE_CHECK_MAX_US ---> POLL_DELAY_MIN_US
JIRA NVGPU-1885
Change-Id: I4514a9763fe0687680d50704bc9f22677a1a3df9
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2085031
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new hal g->ops.gr.falcon.set_current_ctx_invalid() in hal.gr.falcon
unit to invalidate current_ctx by setting invalid flag in register
gr_fecs_current_ctx_r()
Use new hal in gr_gk20a_init_golden_ctx_image() instead of accessing the
register directly
Define the hal for all supported chips
Jira NVGPU-2961
Change-Id: I756dac505c661ea2754abdbf6934927d1b469be3
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2085032
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new hal g->ops.gr.init.gfxp_wfi_timeout() in hal.gr.init unit
to commit gfxp timeout
Define gv11b chip specific operation
Use new hal in gr_gv11b_update_ctxsw_preemption_mode() instead of
directly committing using register accessors
Jira NVGPU-2961
Change-Id: I7694e3128920d9a2856faecf2e3d10a11f0f986e
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2084750
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new hal g->ops.gr.init.commit_cbes_reserve() in hal.gr.init unit
to commit cbes reserve
Define gp10b and gv11b chip specific operations
Use new hals in gr_gp10b_update_ctxsw_preemption_mode() and
gr_gv11b_update_ctxsw_preemption_mode() instead of directly committing
using register accessors
Jira NVGPU-2961
Change-Id: Iea2032ea61264c286b1fab46435ff5a84c90d3da
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2084749
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new hal g->ops.gr.init.commit_ctxsw_spill() in hal.gr.init unit
to commit spill ctxsw buffer
Define gp10b and gv11b operations
Use new hals in gr_gp10b_update_ctxsw_preemption_mode() and
gr_gv11b_update_ctxsw_preemption_mode() instead of directly committing
using register accessors
Jira NVGPU-2961
Change-Id: Iced02d304f12bcb4e78ea31a7728baa04081e325
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2084748
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Below hals are used to get preemption buffer sizes
g->ops.gr.get_ctx_spill_size()
g->ops.gr.get_ctx_pagepool_size()
g->ops.gr.get_ctx_betacb_size()
g->ops.gr.get_ctx_attrib_cb_size()
Move them to hal.gr.init unit
Copy over corresponding gp10b/gv11b definitions
Remove pagepool and attrib_cb size hals from gv11b since gv11b can
re-use gp10b hals
Add spill size and betacb size hals for gv100 and tu104 too since
register values are different on those chips
Remove g->ops.gr.init_gfxp_rtv_cb() hal and replace it by
g->ops.gr.init.get_gfxp_rtv_cb_size() which returns the size of RTV
cb size
Jira NVGPU-2961
Change-Id: I3f2f973c120dbfd22067366f87d06b5c9162defb
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2084747
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move handle_tex_exception hal function to hal.gr.intr
Move hal function for gm20b and gp10b chips.
Removed the null implementation in gv11b hal.
Modify ops->gr.handle_tex_exception call to
ops->gr.intr.handle_tex_exception
JIRA NVGPU-3016
Change-Id: Ifd88ab6f35301525f7a58e8ccf2f4796dda640bf
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2084387
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Code for secure/non-secure ctxsw booting spread across gr_gk20a.c
and gr_gm20b.c. With this change this code is move to gr falcon unit.
Ctxsw loading is now supported with 2 supported common functions:
1.Non secure boot:
int nvgpu_gr_falcon_load_ctxsw_ucode(struct gk20a *g);
2.Secure boot:
int nvgpu_gr_falcon_load_secure_ctxsw_ucode(struct gk20a *g);
Now gr ops function "int (*load_ctxsw_ucode)(struct gk20a *g);" is moved to
gr falcon ops and in chip hals it is set with secure/non-secure booting.
Non-secure booting: nvgpu_gr_falcon_load_ctxsw_ucode support ctxsw loading
in 2 methods: bit-banging uode or booting with bootloader
A. Common and hal functions for non-secure bit-banging ctxsw loading:
Common: static void nvgpu_gr_falcon_load_dmem(struct gk20a *g) ->
Hals: void (*load_gpccs_dmem)(struct gk20a *g,i
const u32 *ucode_u32_data, u32 size);
void (*load_fecs_dmem)(struct gk20a *g,
const u32 *ucode_u32_data, u32 size);
Common: static void nvgpu_gr_falcon_load_imem(struct gk20a *g) ->
Hals: void (*load_gpccs_imem)(struct gk20a *g,
const u32 *ucode_u32_data, u32 size);
void (*load_fecs_imem)(struct gk20a *g,
const u32 *ucode_u32_data, u32 size);
Other basic HALs:
void (*configure_fmodel)(struct gk20a *g); -> configure fmodel for ctxsw loading
void (*start_ucode)(struct gk20a *g); -> start running ctxcw ucode
B.Common and hal functions for non-secure ctxsw loading with bootloader
First get the ctxsw ucode using: nvgpu_gr_falcon_init_ctxsw_ucode, then
Common: static void nvgpu_gr_falcon_load_with_bootloader(struct gk20a *g)
void nvgpu_gr_falcon_bind_instblk((struct gk20a *g) ->
Hal: void (*bind_instblk)(struct gk20a *g, struct nvgpu_mem *mem, u64 inst_ptr);
Common: nvgpu_gr_falcon_load_ctxsw_ucode_segments ->
nvgpu_gr_falcon_load_ctxsw_ucode_header ->
nvgpu_gr_falcon_load_ctxsw_ucode_boot for both fecs and gpccs ->
Hals: void (*load_ctxsw_ucode_header)(struct gk20a *g, u32 reg_offset,
u32 boot_signature, u32 addr_code32, u32 addr_data32,
u32 code_size, u32 data_size);
void (*load_ctxsw_ucode_boot)(struct gk20a *g, u64 reg_offset, u32 boot_entry,
u32 addr_load32, u32 blocks, u32 dst);
Other basic HAL to get gpccs start offset:
u32 (*get_gpccs_start_reg_offset)(void);
C.Secure booting is support with gpmu and acr and with following additional
common function in gr falcon.
static void nvgpu_gr_falcon_load_gpccs_with_bootloader(struct gk20a *g) ->
nvgpu_gr_falcon_bind_instblk and nvgpu_gr_falcon_load_ctxsw_ucode_segments
Additional basic hals:
void (*start_gpccs)(struct gk20a *g);
void (*start_fecs)(struct gk20a *g);
Following ops from gr is removed, since it is not required to set by chip hals:
void (*falcon_load_ucode)(struct gk20a *g, u64 addr_base,
struct gk20a_ctxsw_ucode_segments *segments, u32 reg_offset);
Now this is handled by static common function:
static int nvgpu_gr_falcon_copy_ctxsw_ucode_segments( struct gk20a *g,
struct nvgpu_mem *dst, struct gk20a_ctxsw_ucode_segments *segments,
u32 *bootimage, u32 *code, u32 *data)
JIRA NVGPU-1881
Change-Id: I895a03faaf1a21286316befde24765c8b55075cf
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2083388
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new hal g->ops.gr.init.load_sw_bundle_init() in hal.gr.init unit
and move corresponding code from gk20a_init_sw_bundle()
Add this hal to all the supported chips
Move g->ops.gr.init_sw_veid_bundle() hal to hal.gr.init unit
Move definition of hal to gv11b chip file of hal.gr.init
Add this hal for gv11b/gv100/tu104
Move g->ops.gr.init_sw_bundle64() hal to hal.gr.init unit
Move definition of hal to tu104 chip file of hal.gr.init
Add this hal for tu104
Jira NVGPU-2961
Change-Id: I560c2ba95fb820275d5ccb46939007c58481ccbb
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2083631
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Created gr falcon hal unit with moving following hal functions
from gr to gr falcon:
u32 (*fecs_base_addr)(void);
u32 (*gpccs_base_addr)(void);
void (*dump_stats)(struct gk20a *g);
u32 (*fecs_ctxsw_mailbox_size)(void);
u32 (*get_fecs_ctx_state_store_major_rev_id)(struct gk20a *g);
Modified chip hals to populate these new functions and related code
now refers to gr falcon hals.
Modified kernel headers to have following defs for
fecs/gpccs base address in gm20b/gp10b/gv11b/tu104:
static inline u32 gr_fecs_irqsset_r(void);
static inline u32 gr_gpcs_gpccs_irqsset_r(void);
Created base gm20b hals for fecs/gpccs_base_addr and
removed redundant gp106 related hals.
JIRA NVGPU-1881
Change-Id: I16e820cc1c89223f57988f1e5723fd8fdcbfe89d
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2081245
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move g->ops.gr.commit_global_cb_manager() hal to hal.gr.init unit as
g->ops.gr.init.commit_global_cb_manager()
Move hal definitions to gm20b/gp10b hal files appropriately
Add nvgpu_gr_config pointer to the parameter list of this hal so that
it does not have to dereference struct gr_gk20a in hal.gr.init unit
Jira NVGPU-2961
Change-Id: Iaff476648fa6abdf5a79be500f65a40eb90c0b08
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077219
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move g->ops.gr.commit_global_attrib_cb() hal to hal.gr.init unit as
g->ops.gr.init.commit_global_attrib_cb()
Remove register header accessor from gr_gk20a_commit_global_ctx_buffers()
and move it to hal functions
Move hal definitions to gm20b/gp10b/gv11b hal files appropriately
Jira NVGPU-2961
Change-Id: I5437a190a9e027997f63ef0e741d99e6bbebab3f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077218
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move g->ops.gr.commit_global_pagepool() hal to hal.gr.init unit as
g->ops.gr.init.commit_global_pagepool()
Also move g->ops.gr.pagepool_default_size() hal to
g->ops.gr.init.pagepool_default_size()
Add global_ctx boolean flag as parameer to
g->ops.gr.init.commit_global_pagepool() to distinguish between
committing global pagepool v/s ctxsw pagepool buffers
Remove register header accessors from gr_gk20a_commit_global_ctx_buffers()
and move them to hal functions
Move hal definitions to gm20b/gp10b hal files appropriately
Remove g->ops.gr.pagepool_default_size() hal for gv11b since gv11b can
re-use gp10b hal
Jira NVGPU-2961
Change-Id: Id532defe05edf2e5d291fec9ec1aeb5b8e33c544
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077217
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
