Currently reading temperature value depeads on therm pstate
board objects. In absence of pstate reading temperature
from therm get status will be failed which will cause GVS
failure in NvRmGpuTest_Device_GetTemperature test.
This change will add support to read temperature from
therm sensor_00 register but this will have following
limitation:
- NV_THERM_I2CS_SENSOR_00 doesn't support fractional
precision.
- It doesn't support negative temperatures.
BUG-200736830
Signed-off-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Change-Id: I25e577dac9029fcd787a6f71957dbeefd6fe43dd
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2584269
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
There is HW specific limit on number of channel entries that can be
added for each TSG entry in runlist. Right now there is no checking
to enforce this from SW and hence if User binds more than supported
channels to same TSG, invalid TSG formation error interrupts are
generated.
Fix this by adding appropriate checks in below steps :
- Add new field ch_count to struct nvgpu_tsg to keep track of
channels bound to TSG.
- Define new hal gops.runlist.get_max_channels_per_tsg() to retrieve
HW specific maximum channel count per TSG.
- Implement the HAL for gk20a and gv11b chips, and assign new HALs for
all chips appropriately.
- Increment ch_count while binding the channel to TSG and decrement it
while unbinding.
- While binding channel to TSG, Check if current channel count is
already equal to max channel count. If yes, print an error and bail
out.
Bug 200763991
Change-Id: Ic5f17a52e0fb171d1c020bf4f085f57cdb95f923
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2582095
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Add support for powering off IGPU for switching between
legacy to SMC mode/vice-versa or changing SMC configuration.
The power off can be issued as follows
echo 0 > /dev/nvgpu/igpu0/power
The following steps are done during a poweroff.
1) Deterministic channel idle
2) Acquire write_lock on l->busy semaphore.
3) Wait till power_usage decrements to indicate 0 active jobs.
4) Invoke pm_runtime_put_sync_suspend()
5) Invoke nvgpu_gr_remove_support() to clear existing GR memory.
6) Release write_lock on l->busy
7) Deterministic channel unidle.
Part of the sequence matches that of the gk20a_do_idle code.
The common parts are extracted into new functions
gk20a_block_new_jobs_and_idle() and gk20a_unblock_jobs()
For joint-rail case, the current implementation, does a railgate
and then sets pm_runtime_set_autosuspend_delay(-1) to disable
regular runtime resume/suspend.
Remove clearing of NVGPU_SUPPORT_MIG status during state change
ias it leads to inconsistencies.
Jira NVGPU-6920
Change-Id: I0b3eb3278176122ac061c1e8a94ebfb3c17c3925
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2578501
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: Antony Clince Alex <aalex@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Existing implementation of GR de-init doesn't account for multiple
instances of struct nvgpu_gr. As a fix, below changes are added.
1) nvgpu_gr_free is unified for VGPU as well as native.
2) All the GR instances are freed.
3) Appropriate NULL checks are added when freeing GR memories.
4) 2D, 3D, I2M and ZBC etc are explicitely disabled when MIG is set.
5) In ioctl_ctrl, checks are added to not return error when zbc is NULL
for VGPU as requests are rerouted to RMserver.
Jira NVGPU-6920
Change-Id: Icaa40f88f523c2cdbfe3a4fd6a55681ea7a83d12
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2578500
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: Dinesh T <dt@nvidia.com>
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: Antony Clince Alex <aalex@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
ELPG initialization thread creation can fail when the process is killed.
That leads to driver resume failure.
That thread was stopped on suspend and re-created on resume. To avoid
the issue above, don't stop the ELPG thread in suspend and let the
first created thread handle the ELPG state transitions always.
And stop the ELPG thread during unload.
Also fix couple of instances of config flag as:
s/CONFIG_PMU_POWER_PG/CONFIG_NVGPU_POWER_PG
bug 3345977
Change-Id: I8952edf8d1664ed258f238e265002e716d1bf5c2
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2573763
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: Ashish Mhetre <amhetre@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
ECC counter structures are freed without removing the node from the
stats_list. This can lead to invalid access due to dangling pointers.
Update the ecc counter free logic to set them to NULL upon free, to
remove them from stats_list and free them by validation.
Also updated some of the ecc init paths where error was not propa-
gated to callers and full ecc counters deallocation was not done.
Now, calling unit ecc_free from any context (with counters alloc-
ated or not) is harmless as requisite checks are in place.
bug 3326612
bug 3345977
Change-Id: I05eb6ed226cff9197ad37776912da9dcb7e0716d
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2565264
Tested-by: Ashish Mhetre <amhetre@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Currently, the ECC errors go unnoticed. ECC errors in GR are handled
by incrementing the ecc counters and clearing the intr registers. No
action is taken bassed on the ECC counters. The ECC intr prints are
also not printed by default.
Ideally, the ECC errors should trigger recovery if they cross the
error threshold. While we wait for the ideal ECC handling, convert
the conditional ECC prints to error messages.
JIRA NVGPU-7058
Change-Id: I2e54aeb5aef1d76dd6d4162eedd21cd529089b54
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2573029
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: V M S Seeta Rama Raju Mudundi <srajum@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, cbc init and compression tests are failing because MMU marks
cbc to be not safe.
- Modify cbc.get_base_divisor hal to use ltc_count = 1 for Tegra devices
- Update fb.cbc_configure to write compbit_backing_size value to
fb_mmu_cbc_top register.
- After config confirm that CBC is marked safe.
Bug 3353418
Change-Id: I1e9c27f47f7bfcf476f2499231951382e2e8653d
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2570550
Reviewed-by: Sami Kiminki <skiminki@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: V M S Seeta Rama Raju Mudundi <srajum@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Engine Level Power Gating(ELPG) for ga10b is enabled
on tot for silicon. elpg needs to be enabled
only after verification on silicon and after stress
testing the feature. To avoid issues during ga10b bring-up
with unverified ELPG feature, disable it by setting both
can_elpg_init and elpg_enable to false in ga10b platform
data.
Jira NVGPU-7033
Change-Id: I664d6e031339aa912b78769bd58a4e6d77dca1d0
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2564197
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: Krishna Reddy <vdumpa@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
It is observed that recovery on receiving the ESR MMU NACK exception
does not get triggered as the error returned by tpc level handler
is masked.
NACK is marked handled but recovery is not done and subsequent fb
intr handler does not trigger recovery since NACK is handled.
This leaves the HW engines in bad state.
Fix the tpc error return logic to trigger recovery during ESR MMU
NACK exception.
Bug 3318939
Change-Id: I475826f734e4366e853607e1e0338290ee28249b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2564764
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: svcacv <svcacv@nvidia.com>
Reviewed-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Move interrupt specific data-members from common.mc to common.cic
Some of these data members like sw_irq_stall_last_handled_cond need
To be initialized much earlier during the OS specific init/probe stage.
Also, some more members from struct nvgpu_interrupts(like stall_size,
stall_lines[]), which will soon be moved to CIC will also need to be
initialized early during the OS specific probe stage.
However, the chip specific LUT can only be initialized after the
hal_init stage where the HALs are all initialized.
Split the CIC init to accommodate the above initialization requirements.
JIRA NVGPU-6899
Change-Id: I9333db4cde59bb0aa8f6eb9f8472f00369817a5d
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2552535
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
This change adds lsf_ucode_desc_wrapper to hold the pkc signature
header and corresponding lsf_lsb_header_v2. During blob preparation
based on the flag is_sig_pkc, the new header defines will be
packed into ls blob and passed to acr.
The flag NVGPU_PKC_LS_SIG_ENABLED is also added, which will be set
based on the acr core selection.
JIRA NVGPU-6365
Change-Id: I74e25d7c0f69d4007893e46006f97f2a607fd11f
Signed-off-by: smadhavan <smadhavan@nvidia.com>
Signed-off-by: deepak goyal <dgoyal@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2506136
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
At present, there is an inconsistency in the order in which
gpc_tpc masks are reported to the userspace. Both gpc and
tpc masks are reported using physical-ids. However, the
gpc_tpc_masks array is ordered by logical gpc-ids and
not physical-ids. This creates a mismatch between the gpc
reported as enabled in the gpc_mask and its corresponding
gpc_tpc_mask.
Introduce field "gpc_tpc_mask_physical" which stores the
gpc_tpc_masks in physical order and update
NVGPU_GPU_IOCTL_GET_TPC_MASKS to return this field.
Bug 200665942
Change-Id: I63aa83414a59676b7e7d36b6deb527e2f3c04cff
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2531114
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Add gops_fbp_fs and gops_gpc_pg struct
- Add HALs to write to NV_FUSE_CTRL_OPT_FBP and
NV_FUSE_CTRL_OPT_GPC fuses needed for floorsweeping
- Add set_fbp_mask and set_gpc_mask to probe FBP and GPC mask
respectively during gpu probe
- Add sysfs node: fbp_fs_mask and gpc_fs_mask to store
FBP and GPC floorsweeping mask sent from userspace
- Move the floorsweeping programming early in NVGPU’s GPU init
function and then issue a PRI init.
JIRA NVGPU-6433
Change-Id: I84764d625c69914c107e1e8c7f29c476c2f64f78
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2499571
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Enable nvriscv debug buffer feature in NVGPU.
Debug buffer is a feature to print the debug log from ucode onto console
in real time.
Debug buffer feature uses the DMEM, queue and SWGEN1 interrupt to share
ucode debug data with NVGPU.
Ucode writes debug message to DMEM and updates offset in queue to trigger
interrupt to NVGPU.
NVGPU copies the debug message from DMEM to local buffer to process and
print onto console.
Debug buffer feature is added under falcon unit and required engine
can utilize the feature by providing required param through public
functions.
Currently GA10B NVRISCV NS/LS PMU ucode has support for this feature
and enabled support on NVGPU side by adding required changes, with this
feature enabled, it is now possible to see prints in real time.
JIRA NVGPU-6959
Change-Id: I9d46020470285b490b6bc876204f62698055b1ec
Signed-off-by: mkumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2548951
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc_kernel_abi <svc_kernel_abi@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Fix GSP/PMU registers priv errors which are seen as part of boot sequence.
- Couple of GSP/PMU Falcon/NVRISCV registers are allowed to access
upon NVRISCV bootrom completion but these registers were needed
to configure on legacy chips to bootstrap/configure Falcon.
- Add is_falcon2_enabled or NVGPU_PMU_NEXT_CORE_ENABLED check
to skip these registers.
JIRA NVGPU-7025
Change-Id: I087a477ade6736398dea113f89894a0ff73ae647
Signed-off-by: mkumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2553127
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added below IVC commands to support VAB on HV.
* TEGRA_VGPU_CMD_FB_VAB_RESERVE - Enable & Configure VAB tracking
* TEGRA_VGPU_CMD_FB_VAB_FLUSH_STATE - Dump VAB to user buffer
* TEGRA_VGPU_CMD_FB_VAB_RELEASE - Disable VAB tracking
Also set HAL and enable VAB for ga10b vgpu.
Jira GVSCI-4619
Change-Id: Id7564611c24740ab8613e4baa420ee58fb52759a
Signed-off-by: Sagar Kadamati <skadamati@nvidia.com>
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2507268
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
