The following DEVCTLs not needed in safety build
Compiled out below DEVCTLs for safety build
* NVGPU_GPU_DEVCTL_SET_THERM_ALERT_LIMIT
* NVGPU_GPU_DEVCTL_GET_TPC_EXCEPTION_EN_STATUS
* NVGPU_GPU_DEVCTL_GET_CPU_TIME_CORRELATION_INFO
Also added config flag CONFIG_NVGPU_IOCTL_NON_FUSA
JIRA NVGPU-3768
Change-Id: Ia233d0aac8201268524581f588d97390a913ab9c
Signed-off-by: Sagar Kadamati <skadamati@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2159398
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
There was a name clash between the nvgpu_set_error_notifier*() APIs and
the SET_ERROR_NOTIFIER IOCTL. Therefore, the APIs were renamed from
nvgpu_set_error_notifier*() to nvgpu_set_err_notifier*(). This rename
was done to fix MISRA 5.x errors.
JIRA NVGPU-1633
Change-Id: I06af551a664b0706f106e853f1ea8733894f11bd
Signed-off-by: Adeel Raza <araza@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2159813
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following are removed for safety build by adding
CONFIG_NVGPU_KERNEL_MODE_SUBMIT flag.
1) HAL ops in g->ops.sync.syncpt
add_wait_cmd
get_wait_cmd_size
add_incr_cmd
get_incr_cmd_size
get_incr_per_release
2) g->ops.sync.sema is removed in its entirety and contains the
following ops.
3) The following files are compiled out using the above flag.
hal/sync/sema_cmdbuf_gk20a.c
hal/sync/sema_cmdbuf_gv11b.c
Jira NVGPU-3479
Change-Id: I99ae6913e5fe5707ff9a3e2cf06cee8710def7cc
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2130352
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The following functions belong to the path of kernel_mode submit and
the flag CONFIG_NVGPU_KERNEL_MODE_SUBMIT is used to compile these out
of safety builds.
channel_gk20a_alloc_priv_cmdbuf
channel_gk20a_free_prealloc_resources
channel_gk20a_joblist_add
channel_gk20a_joblist_delete
channel_gk20a_joblist_peek
channel_gk20a_prealloc_resources
nvgpu_channel
nvgpu_channel_add_job
nvgpu_channel_alloc_job
nvgpu_channel_alloc_priv_cmdbuf
nvgpu_channel_clean_up_jobs
nvgpu_channel_free_job
nvgpu_channel_free_priv_cmd_entry
nvgpu_channel_free_priv_cmd_q
nvgpu_channel_from_worker_item
nvgpu_channel_get_gpfifo_free_count
nvgpu_channel_is_prealloc_enabled
nvgpu_channel_joblist_is_empty
nvgpu_channel_joblist_lock
nvgpu_channel_joblist_unlock
nvgpu_channel_kernelmode_deinit
nvgpu_channel_poll_wdt
nvgpu_channel_set_syncpt
nvgpu_channel_setup_kernelmode
nvgpu_channel_sync_get_ref
nvgpu_channel_sync_incr
nvgpu_channel_sync_incr_user
nvgpu_channel_sync_put_ref_and_check
nvgpu_channel_sync_wait_fence_fd
nvgpu_channel_update
nvgpu_channel_update_gpfifo_get_and_get_free_count
nvgpu_channel_update_priv_cmd_q_and_free_entry
nvgpu_channel_wdt_continue
nvgpu_channel_wdt_handler
nvgpu_channel_wdt_init
nvgpu_channel_wdt_restart_all_channels
nvgpu_channel_wdt_restart_all_channels
nvgpu_channel_wdt_rewind
nvgpu_channel_wdt_start
nvgpu_channel_wdt_stop
nvgpu_channel_worker_deinit
nvgpu_channel_worker_from_worker
nvgpu_channel_worker_init
nvgpu_channel_worker_poll_init
nvgpu_channel_worker_poll_wakeup_post_process_item
nvgpu_channel_worker_poll_wakeup_process_item
nvgpu_submit_channel_gpfifo_kernel
nvgpu_submit_channel_gpfifo_user
gk20a_userd_gp_get
gk20a_userd_pb_get
gk20a_userd_gp_put
nvgpu_fence_alloc
The following members of struct nvgpu_channel are compiled out of
safety build.
struct gpfifo_desc gpfifo;
struct priv_cmd_queue priv_cmd_q;
struct nvgpu_channel_sync *sync;
struct nvgpu_list_node worker_item;
struct nvgpu_channel_wdt wdt;
The following files are compiled out of safety build.
common/fifo/submit.c
common/sync/channe1_sync_semaphore.c
hal/fifo/userd_gv11b.c
Jira NVGPU-3479
Change-Id: If46c936477c6698f4bec3cab93906aaacb0ceabf
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2127212
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Safety build does not support vidmem. This patch compiles out vidmem
related changes - vidmem, dma alloc, cbc/acr/pmu alloc based on
vidmem and corresponding tests like pramin, page allocator &
gmmu_map_unmap_vidmem..
As vidmem is applicable only in case of DGPUs the code is compiled
out using CONFIG_NVGPU_DGPU.
JIRA NVGPU-3524
Change-Id: Ic623801112484ffc071195e828ab9f290f945d4d
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2132773
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove below hals since the corresponding functions are same on all
platforms and they are h/w independent
g->ops.gr.enable_ctxsw()
g->ops.gr.disable_ctxsw()
g->ops.gr.reset()
Call the functions directly at all places
Remove CONFIG_NVGPU_DEBUGGER from places where these functions are
called since they are not debugger dependent
This also helps to disable CONFIG_NVGPU_DEBUGGER and to keep recovery
sequence intact
Jira NVGPU-3506
Change-Id: Id2b208ca23dc4667e78edcd8ad242a8558e0ff64
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2137255
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Hal API g->ops.gr.halt_pipe() is defined in unsafe unit hal.gr.gr
It is called from safe unit, and it calls into API
g->ops.gr.falcon.ctrl_ctxsw() which is also safe
Hence get rid of unsafe API g->ops.gr.halt_pipe().
Caller now directly calls hal.gr.falcon API to halt pipe
Jira NVGPU-3506
Change-Id: I5439cb79431795fc7c22384832cf632d6db03316
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2127755
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move some interrupt handling hals from hal.gr.gr unit to hal.gr.intr
unit as below
g->ops.gr.intr.set_hww_esr_report_mask()
g->ops.gr.intr.handle_tpc_sm_ecc_exception()
g->ops.gr.intr.get_esr_sm_sel()
g->ops.gr.intr.clear_sm_hww()
g->ops.gr.intr.handle_ssync_hww()
g->ops.gr.intr.log_mme_exception()
g->ops.gr.intr.record_sm_error_state()
g->ops.gr.intr.get_sm_hww_global_esr()
g->ops.gr.intr.get_sm_hww_warp_esr()
g->ops.gr.intr.get_sm_no_lock_down_hww_global_esr_mask()
g->ops.gr.intr.get_sm_hww_warp_esr_pc()
g->ops.gr.intr.tpc_enabled_exceptions()
g->ops.gr.intr.get_ctxsw_checksum_mismatch_mailbox_val()
Rename gv11b_gr_sm_offset() to nvgpu_gr_sm_offset() and move to
common.gr.gr unit
All of above functions and hals will be needed in safety build
Jira NVGPU-3506
Change-Id: I278d528e4b6176b62ff44eb39ef18ef28d37c401
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2127753
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
renamed NVGPU_LS_PMU to NVGPU_FEATURE_LS_PMU to follow
nvgpu naming standard
Compile out LS PMU files when PMU RTOS support is
disabled for safety build by setting NVGPU_LS_PMU
build flag to 0
JIRA NVGPU-3418
Change-Id: Ib09924ac25657e932723c10be573f2f701cb7bea
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2127794
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Compile out PMU RTOS specific PMU HAL code when
PMU RTOS support is disabled for safety build by setting
NVGPU_LS_PMU build flag to 0
Added new functions for gv11b PMU HAL to easy compile out
other PMU HAL files.
Replaced all gk20a_writel/readl calls with nvgpu_writel/readl
calls in hal/pmu/pmu_gv11b.c files
JIRA NVGPU-3418
Change-Id: I7c315349aa95721990dc7b1570383669bcb6221f
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2117691
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
pmu_gk20a.c includes hw_mc_gk20a.h other than hw_pwr_gk20a.h
to access & configure pmu interrupt, this breaks single hw header
for HAL file.
Moved PMU interrupt enable to MC unit by creating/modifying current
mc ops intr_unit_config to intr_pmu_unit_config to configure PMU
interrupt specifically as this ops is only used by PMU unit
JIRA NVGPU-3239
Change-Id: I2514f17197708047b46ea712cf4569a5b3bfab2a
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2126420
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added NVGPU_DBG_GPU_IOCTL_SET_CTX_MMU_DEBUG_MODE ioctl to set MMU
debug mode for a given context.
Added gr.set_mmu_debug_mode HAL to change NV_PGPC_PRI_MMU_DEBUG_CTRL
for a given channel. HAL implementation for native case is
gm20b_gr_set_mmu_debug_mode. It internally uses regops, which directly
writes to the register if the context is resident, or writes to
gr context otherwise.
Added NVGPU_SUPPORT_SET_CTX_MMU_DEBUG_MODE to enable the feature.
NV_PGPC_PRI_MMU_DEBUG_CTRL has to be context switched in FECS ucode,
so the feature is only enabled on TU104 for now.
Bug 2515097
Change-Id: Ib4efaf06fc47a8539b4474f94c68c20ce225263f
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110720
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Some functions are not accessing hardware directly
but are being called using HAL ops: For example
g->ops.pmu.pmu_elpg_statistics,
g->ops.pmu.pmu_pg_init_param,
g->ops.pmu.pmu_pg_supported_engines_list,
g->ops.pmu.pmu_pg_engines_feature_list,
g->ops.pmu.pmu_is_lpwr_feature_supported,
g->ops.pmu.pmu_lpwr_enable_pg,
g->ops.pmu.pmu_lpwr_disable_pg,
g->ops.pmu.pmu_pg_param_post_init,
g->ops.pmu.save_zbc
Change the function access by using sw ops, like:
Create new functions:
int nvgpu_pmu_elpg_statistics(struct gk20a *g, u32 pg_engine_id,
struct pmu_pg_stats_data *pg_stat_data);
void nvgpu_pmu_save_zbc(struct gk20a *g, u32 entries);
bool nvgpu_pmu_is_lpwr_feature_supported(struct gk20a *g,
u32 feature_id);
JIRA NVGPU-3209
Change-Id: I6db9b43c7c4a5054720a72487302b740b091044d
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2110963
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Some functions are not accessing hardware directly
but are being called using HAL ops: For example
.pmu_init_perfmon = nvgpu_pmu_init_perfmon_rpc,
.pmu_perfmon_start_sampling = nvgpu_pmu_perfmon_start_sampling_rpc,
.pmu_perfmon_stop_sampling = nvgpu_pmu_perfmon_stop_sampling_rpc,
.pmu_perfmon_get_samples_rpc = nvgpu_pmu_perfmon_get_samples_rpc,
These were being called by:
g->ops.pmu.pmu_init_perfmon,
g->ops.pmu.pmu_perfmon_start_sampling,
g->ops.pmu.pmu_perfmon_stop_sampling,
g->ops.pmu.pmu_perfmon_get_samples_rpc
Change the function access by using sw ops, like:
Create new functions:
int nvgpu_pmu_perfmon_init(struct gk20a *g,
struct nvgpu_pmu *pmu, struct nvgpu_pmu_perfmon *perfmon);
int nvgpu_pmu_start_sampling_perfmon(struct gk20a *g,
struct nvgpu_pmu *pmu, struct nvgpu_pmu_perfmon *perfmon);
int nvgpu_pmu_stop_sampling_perfmon(struct gk20a *g,
struct nvgpu_pmu *pmu, struct nvgpu_pmu_perfmon *perfmon);
int nvgpu_pmu_get_samples_rpc_perfmon(struct gk20a *g,
struct nvgpu_pmu *pmu, struct nvgpu_pmu_perfmon *perfmon);
and based on hardware chip call the chip specific
perfmon sw init function: nvgpu_gv11b_perfmon_sw_init() and
nvgpu_gv100_perfmon_sw_init() and assign the sw ops for perfmon
JIRA NVGPU-3210
Change-Id: I2470863f87a7969e3c0454fa48761499b08d445c
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109899
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the get_litter() functions out of the main hal init to its own
source file for each device. This allows removal of the hw_proj_*.h
files in the main hal init file. This reduces the number of hw header
includes per file creating better code isolation.
JIRA NVGPU-3274
Change-Id: I9e04294434acf274ccc2236646f0f15f710a6976
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2107751
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
create a new unit common.fbp which initializes fbp support and provides
APIs to retrieve fbp data.
Create private header with below data
struct nvgpu_fbp {
u32 num_fbps;
u32 max_fbps_count;
u32 fbp_en_mask;
u32 *fbp_rop_l2_en_mask;
};
Expose below public APIs to initialize/remove fbp support:
nvgpu_fbp_init_support()
nvgpu_fbp_remove_support()
vgpu_fbp_init_support() for vGPU
Expose below APIs to retrieve fbp data
nvgpu_fbp_get_num_fbps()
nvgpu_fbp_get_max_fbps_count()
nvgpu_fbp_get_fbp_en_mask()
nvgpu_fbp_get_rop_l2_en_mask()
Use above APIs to retrieve fbp data in all the code.
Remove corresponding fields from struct nvgpu_gr since they are no
longer referred from that structure
Jira NVGPU-3124
Change-Id: I027caf4874b1f6154219f01902020dec4d7b0cb1
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2108617
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
channel.c calling nvgpu_gr_flush_channel_tlb() creating circular
dependency between gr and fifo. Avoid this by moving channel tlb
related data to struct nvgpu_gr_intr in gr_intr_priv.h and
initialized this data in gr_intr.c.
Created following new gr intr hal and called this new hal from channel.c
void (*flush_channel_tlb)(struct gk20a *g);
JIRA NVGPU-3214
Change-Id: I2d259bf52db967273030680f50065af94a17f417
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109274
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove gr_priv.h from outside gr files.
Add hal function in gr.init for get_no_of_sm. This helps
to avoid dereferencing gr in couple of files for g->gr->config and
avoid gr_priv.h include in those files.
Replace nvgpu_gr_config_get_no_of_sm call with
g->ops.gr.init.get_no_of_sm for files outside gr unit.
Jira NVGPU-3218
Change-Id: I435bb233f70986e31fbfcb900ada3b3bda0bc787
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109182
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
There are many miscellaneous HALs for various MM related functionality.
This patch aims to migrate all the remaining MM code from the <chip>/
mm_<chip>.[ch] files in HAL files under hal/.
Much of this is fairly straightforward copy/paste and updates to the
HAL init files.
The exception to that is the move of the left over gv11b MMU fault
handling code in mm_gv11b.c. Having both a hal/mm/mm/mm_gv11b.c and
a gv11b/mm_gv11b.c file causes tmake to choke so the gv11b/mm_gv11b.c
file was moved to gv11b/mmu_fault_gv11b.c. This will be cleaned up in
a subsequent patch.
JIRA NVGPU-2042
Change-Id: I12896de865d890a61afbcb71159cff486119ffb8
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2109050
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move remaining chip specific gr hal files to hal.gr.gr unit.
Remove unused headers include from hal files in hal.gr.gr unit
Update gr hal headers include location in the files currently
using these headers.
Jira NVGPU-3219
Change-Id: Ic632020a90ac4b8ac1e0359e979864b42f0ef2c0
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2105489
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Renamed
- gk20a_tsg_set_runlist_interleave -> nvgpu_tsg_set_interleave
Moved set_interleave from runlist to tsg
- runlist.set_interleave -> tsg.set_interleave
Existing HAL was only setting tsg->interleave, and was not
accessing any register. This is now done in nvgpu_tsg_set_interleave
and tsg.set_interleave is only used in vgpu case.
Jira NVGPU-3156
Change-Id: I5dac1305afcbd950214316289cf704ee8b43fc89
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100610
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved the following HALs from fifo to tsg
- set_timeslice
- default_timeslice_us
Renamed
- gk20a_tsg_set_timeslice -> nvgpu_tsg_set_timeslice
- min_timeslice_us -> tsg_timeslice_min_us
- max_timeslice_us -> tsg_timeslice_max_us
Scale timeslice to take into account PTIMER clock in
nvgpu_runlist_append_tsg.
Removed gk20a_channel_get_timescale_from_timeslice, and
instead moved timeout and scale computation into runlist HAL,
when building TSG entry:
- runlist.get_tsg_entry
Use ram_rl_entry_* accessors instead of hard coded values
for default and max timeslices.
Added #defines for min, max and default timeslices.
Jira NVGPU-3156
Change-Id: I447266c087c47c89cb6a4a7e4f30acf834b758f0
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100052
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently max_css_buffer_size is incorrectly stored in struct nvgpu_gr
Add a new hal g->ops.css.get_max_buffer_size() to get the size and
remove the variable from struct nvgpu_gr
Jira NVGPU-3125
Change-Id: If78fd86559526b84031051e281a98327a46fc11d
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2105652
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the gk20a_init_mm_setup_hw to common code. This function just
calls HALs to initialize various bits of HW. However, since this
code assumes that (some of) the HALs are present this code is treated
as a vGPU HAL (that is it's NULL for vGPU).
This patch also renames the MM HW init HAL.
Sicne the gv11b variant of this setup_hw HAL did have some differences
from the gk20a version the new common version required some work. The
gv11b code was copied into the common function but now the gv11b
specific calls were HAL'ified (since they will need to be anyway for
the MMU fault buf code) and protected by an if-condition.
JIRA NVGPU-2042
Change-Id: I959293394ee8793923d858ee37b7ce346096654f
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2104541
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the remaining GMMU HAL related code from the gm20b/, gp10b/,
and gv11b/ directories to new gmmu hal source files.
Also update all makefiles and HAL init code to refelct the new
location of the headers and source code.
JIRA NVGPU-2042
Change-Id: Ic9b85cc547bd0f994ad11042fc4093c517327399
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2103672
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move chip specific recovery code for volta onwards
architecture to hal/rc/rc_gv11b.c
Rename
fifo.teardown_ch_tsg -> fifo.recover
gk20a_runlist_update_locked -> nvgpu_runlist_update_locked
Remove
Unused h/w headers from fifo_gv11b.c
Use local variable f instead of g->fifo
JIRA NVGPU-1314
Change-Id: Ia535bbe4780e7241fdd911a8f577c6b98cf0fe53
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2102897
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move gr_gk20a_handle_fecs_error from gr_gk20a.c to
nvgpu_gr_intr_handle_fecs_error in common.gr.intr unit
Move gr_gp10b_handle_fecs_error and gr_gv11b_handle_fecs_error
to hal.gr.intr unit
JIRA NVGPU-3016
Change-Id: I5b7c48ebfd7b13f497980c4d0b64d718649154bd
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2103741
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
