mm_gv11b.c has several direct calls to fb_gv11b.h. Redirect them to
go via a HAL. Also make sure the HALs are using parameter with
correct signedness and prefix the parameter constants with
NVGPU_FB_MMU_.
MMU buffer table indices were also defined in fb_gv11b.h, even though
the tables themselves are defined in include/nvgpu/mm.h. Move the
indices to include/nvgpu/mm.h and prefix them with NVGPU_MM_MMU_.
JIRA NVGPU-714
Change-Id: Ieeae7c5664b8f53f8313cfad0a771d14637caa08
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1776131
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Write new pm mode to context buffer header. Ucode use
this mode to enable mode-e context switch. This is Mode-B
context switch of PMs with Mode-E streamout on one context.
If this mode is set, Ucode makes sure that Mode-E pipe
(perfmons, routers, pma) is idle before it context switches PMs.
- This allows us to collect counters in a secure way
(i.e. on context basis) with stream out.
Bug 2106999
Change-Id: I5a7435f09d1bf053ca428e538b0a57f3a175ac37
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1760366
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move queries of FB MMU configuration to FB HAL. Also use g->ltc_count
instead of reading the number of LTCs from FB. These changes together
remove last direct uses of FB registers from GR.
JIRA NVGPU-714
Change-Id: I1b4b46fc2f636f5c1904e4174040a47a27948999
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1773076
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new HAL gops.fb.mmu_invalidate_replay() to invalidate replay mmu fault
Use existing API gv11b_fb_mmu_invalidate_replay() to set to this HAL on all
Volta chips
Bug 2228914
Jira NVGPU-838
Jira NVGPUT-73
Change-Id: I394901857d41499f3ea44023393fe271fb664260
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1767970
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Added prefix gp106_ to sec2_wait_for_halt()
& sec2_clear_halt_interrupt_status() for gp106
SEC2 HAL
- Made changes to gp106_sec2_wait_for_halt() to
read SEC2 falcon mailbox using common falcon
mailbox access functions.
- Add define for falcon mailbox
- These changes are done to reuse gp106 HAL's
for GPU_NEXT.
Change-Id: Id32a7636d775b482684212ed4ef5d01c8ea65335
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1755618
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gr_gk20a_find_priv_offset_in_buffer() we right now calculate
offset of a register in gpccs segment based on register address type
Separate out sequence to find offset in gpccs segment and move it to new API
gr_gk20a_get_offset_in_gpccs_segment()
Introduce new HAL gops.gr.get_offset_in_gpccs_segment() and set above API
to this HAL
Call HAL from gr_gk20a_find_priv_offset_in_buffer() instead of calling direct
API
Jira NVGPUT-118
Change-Id: I0df798456cf63e3c3a43131f3c4ca7990b89ede0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1761669
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Separate HAL added in gv11b and gv100 for
init_gpc_mmu function.
In gv11b HAL, RMW is enabled for gpu atomics
as default.
In gv100 HAL, GPC atomic capability mode will
get set based on the FB MMU capability.
If GPU is connected through NVLINK then mmu
will be set to RMW mode, else it will be in
L2 mode.
Bug 200390336
Change-Id: I224934f83d1762ec864ef8da7265dd01d86893a0
Signed-off-by: Ashish Srivastava <assrivastava@nvidia.com>
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1735137
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- This patch sets required fecs trace functions to hals.
- In gv100, GPU VA needs to programmed in ucode to
get FECS trace. Hence, setting this "NVGPU_FECS_TRACE_VA"
characteristic to be true.
EVLR-2708
Change-Id: I41845a1db8452b8e3fa9d67ecc4cabfac503fd0b
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1747269
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add remove_gr_sys() op to gpu_ops to reverse steps
done in create_gr_sysfs().
Make gv11b_tegra_remove() specific to gv11b instead
to properly remove sysfs nodes. This also helps in
having gv11b specific remove steps.
Also, update platform remove function of dGPU i.e.
nvgpu_pci_tegra_remove() to remove sysfs nodes. This
adds parity with iGPU platform remove.
Bug 1987855
Change-Id: Ibbaffac5c24346709347f86444a951461894354d
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1735987
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- removed inclusion of linux includes.
- replaced with nvgpu/*.h's
- reformated the function signature of
"css_hw_get_pending_snapshot" and
"css_hw_get_overflow_status" be global instead of
static.
- added get_pending_snapshot and get_overflow_status
to ops->css.
JIRA: VQRM-3699
Change-Id: I177904c263e143b414924c2c28ad6fd3cfd00132
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1732783
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below HALs to setup mmu_fault configuration registers and to read
information registers and set them on Volta
gops.fb.write_mmu_fault_buffer_lo_hi()
gops.fb.write_mmu_fault_buffer_get()
gops.fb.write_mmu_fault_buffer_size()
gops.fb.write_mmu_fault_status()
gops.fb.read_mmu_fault_buffer_get()
gops.fb.read_mmu_fault_buffer_put()
gops.fb.read_mmu_fault_buffer_size()
gops.fb.read_mmu_fault_addr_lo_hi()
gops.fb.read_mmu_fault_inst_lo_hi()
gops.fb.read_mmu_fault_info()
gops.fb.read_mmu_fault_status()
Jira NVGPUT-13
Change-Id: Ia99568ff905ada3c035efb4565613576012f5bef
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1744063
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below new HALs to allocate/map/commit global context buffers
gops.gr.alloc_global_ctx_buffers()
gops.gr.map_global_ctx_buffers()
gops.gr.commit_global_ctx_buffers()
Set these HALs for all the supported GPUs
We right now re-use below APIs to set these HALs
gr_gk20a_alloc_global_ctx_buffers()
gr_gk20a_map_global_ctx_buffers()
gr_gk20a_commit_global_ctx_buffers()
Jira NVGPUT-27
Change-Id: I975a54e8d1716af057f982d543787748d35a256e
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1743362
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
VBIOS link_disable_mask should be sufficient to find the connected
links. As VBIOS is not updated with correct mask, we parse the DT
node where we hardcode the link_id. DT method is not scalable as same
DT node is used for different dGPUs connected over PCIE. Remove the
DT parsing of link id and use HAL to get link_mask based on the GPU.
JIRA NVLINK-162
Change-Id: Idb7b639962928ce48711a0d7fc277c4c324bee91
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1738967
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The sequence of INIT* minion dlcmd varies between nvlink 2.0 and 2.2.
The order is strict for 2.2. Also there are new dlcmds added to the
nvlink bringup sequence. Add HAL to allow sequence update for nvlink 2.2.
Old sequence:
INITLANEENABLE-> INITDLPL
New Sequence:
INITDLPL->INITDLPL_TO_CHIPA->INITTL->INITLANEENABLE
JIRA NVLINK-176
Change-Id: I49e0a726f56e7d6122ac4cddf0f0e021d16f1926
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1738329
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The WPR will be divided into several sub-WPRs,
one for each Falcon and one common for sharing
between Falcons which bootstrap falcons
- Defined & used flag NVGPU_SUPPORT_MULTIPLE_WPR
to know M-WPR support.
- Added struct lsfm_sub_wpr to hold subWPR header info
- Added struct lsf_shared_sub_wpr_header to hold subWPR
info & copied to WPR blob after LSF_WPR_HEADER
- Set NVGPU_SUPPORT_MULTIPLE_WPR to false for gp106,
gv100 & gv11b.
- Added methods to support to multiple WPR support &
called by checking flag NVGPU_SUPPORT_MULTIPLE_WPR
in ucode blob preparation flow.
JIRA NVGPUTU10X / NVGPUT-99
Change-Id: I81d0490158390e79b6841374158805f7a84ee6cb
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1725369
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Before nvlink 2.2, driver was responsible for setting the NVLink clocks
during NVLink initialization. For the purpose of security, NVLink PLL
handling is moved to Minion in nvlink 2.2 and driver should stop writing
to these registers.
JIRA NVLINK-167
Change-Id: I18392a29c322da55053037bfde62c8f74ee75288
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1730597
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
RXDET is supported only on nvlink 2.2 devices and forward.
Add HAL to run RXDET selectively based on chip. RXDET needs to be
done after the links are out of reset but before any other link
level initialization.
minion_send_cmd is also made non-static to support RXDET
functionality.
JIRA NVLINK-160
Change-Id: Ic65b8dbc7281743f62072089ff3c805521ac9b38
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1729525
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below two new HALs
gops.fb.enable_hub_intr() to enable hub interrupts
gops.fb.disable_hub_intr() to disable hub interrupts
Set existing APIs gv11b_fb_enable/disable_hub_intr() to these HALs
Call the HALs everywhere instead of calling the APIs directly
Jira NVGPUT-44
Change-Id: Id299c6d228733ed365a71be6b180186776cc1306
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1725977
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
As part of the MISRA fixes, moving all the
gating_reglist files to common/clock_gating dir,
the new directory structure suggested to follow.
Removed unused gating_reglist files for gk20a
JIRA NVGPU-646
Change-Id: I388855befcf991ee68eeffed10fe9ac456210649
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1722330
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gv100 cannot use idle filter values defined for
gp106 since values are different. Also gv100 cannot
use gv11b idle filter values since prod values are
different between gv100 and gv11b. Finally since
PROD values match with POR INIT values, there
is no need to init idle filters for gv100.
Bug 2115080
Change-Id: I9e7cfbde364d993ae04d80af14650739f32345cc
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1724060
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below new HALs for bios operations
gops.bios.devinit()
gops.bios.preos()
gops.bios.verify_devinit()
Export existing APIs gp106_bios_devinit() and gp106_bios_preos() and set them
to above HALs on gp106 and gv100
And call new HALs from gp106_bios_init() if supported instead of directly
calling APIs
Jira NVGPUT-48
Change-Id: Ic89f1c86cf6e3e0785b3663fe733b201d6f2f773
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1708382
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Semaphore methods currently being used in Volta are deprecated for future chips
And on Volta we support both old and new methods
So replace old methods by new methods on Volta itself so that new methods
get tested on silicon
Implement below HALs for Volta with new semaphore methods
gops.fifo.add_sema_cmd() to insert HOST semaphore acquire/release methods
gops.fifo.get_sema_wait_cmd_size() to get size of acquire command buffer
gops.fifo.get_sema_incr_cmd_size() to get size of release command buffer
Also use new methods in these APIs
gv11b_fifo_add_syncpt_wait_cmd()
gv11b_fifo_add_syncpt_incr_cmd()
And change corresponding APIs to reflect correct size of command buffer
gv11b_fifo_get_syncpt_wait_cmd_size()
gv11b_fifo_get_syncpt_incr_cmd_size()
Jira NVGPUT-16
Change-Id: Ia3a37cd0560ddb54761dfea9bd28c4384cd8a11c
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1704518
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below new HALs
gops.fifo.add_sema_cmd() to insert HOST semaphore acquire/release methods
gops.fifo.get_sema_wait_cmd_size() to get size of acquire command buffer
gops.fifo.get_sema_incr_cmd_size() to get size of release command buffer
Separate out new API gk20a_fifo_add_sema_cmd() to implement semaphore acquire/
release sequence and set it to gops.fifo.add_sema_cmd()
Add gk20a_fifo_get_sema_wait_cmd_size() and gk20a_fifo_get_sema_incr_cmd_size()
to return respective command buffer sizes
Jira NVGPUT-16
Change-Id: Ia81a50921a6a56ebc237f2f90b137268aaa2d749
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1704490
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new HAL gops.mc.isr_nonstall() to handle nonstall interrupts
We already handle nonstall interrupts in nvgpu_intr_nonstall()
But this API is completely in linux specific code
Separate out os-independent code to handle nonstall interrupts in new API
mc_gk20a_isr_nonstall() and set it to HAL gops.mc.isr_nonstall() for all
existing chips
Call this HAL from nvgpu_intr_nonstall()
Jira NVGPUT-8
Change-Id: Iec6a56db03158a72a256f7eee8989a0a8a42ae2f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1706589
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently gv100 is using very large timeout for polling
eng preempt done. This will prevent eng preempt polling
loop from timing out. Also before eng preempt loop times
out, there could be channel timeout getting kicked in.
Avoid this by using gr_idle_timeout defined by driver.
Change-Id: Icff5ae37f95f58f3195b9d630bdae42c08ced9a6
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1701059
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below two new HALs
gops.fifo.runlist_hw_submit() to submit a new runlist to hardware
gops.fifo.runlist_wait_pending() to wait until runlist write is successful
Set existing API gk20a_fifo_runlist_wait_pending() to
gops.fifo.runlist_wait_pending HAL
Add new API gk20a_fifo_runlist_hw_submit() which submits the runlist to h/w
and set it to gops.fifo.runlist_hw_submit HAL
Jira NVGPUT-20
Change-Id: Ic23f7d947e30883aca0b536de818e79e14733195
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1700548
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gr_gv11b/gk20a_create_priv_addr_table() we do not consider floorswept FBPAs
and just calculate the unicast list assuming all FBPAs are present
This generates incorrect list of unicast addresses
Fix this introducing new HAL ops.gr.split_fbpa_broadcast_addr
Set gr_gv100_get_active_fpba_mask() for GV100
Set gr_gk20a_split_fbpa_broadcast_addr() for rest of the chips
gr_gv100_get_active_fpba_mask() will first get active FPBA mask and generate
unicast list only for active FBPAs
Bug 200398811
Jira NVGPU-556
Change-Id: Idd11d6e7ad7b6836525fe41509aeccf52038321f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1694444
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
