The channel timeout ends up in a strange state during timeout handling
for a brief moment; it can become stopped and started again, and the
timeout lock is released in the middle. Add a more explicit rewind
function to reset the timeout to start if it's active. The active check
allows to use this from gk20a_channel_timeout_restart_all_channels(), so
that's also modified.
Also replace the return statements with more readable control flow in
gk20a_channel_timeout_handler().
Change-Id: Ia7d67242dfc149ace1f4f841a837e90b6c985308
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1989327
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add clk arbiter support for tu104
setup clk_arb for supporting functions in hal_tu04
TU104 supports GPCCLK and not GPC2CLK
Remove multiplication and division by 2 to convert gpcclk to gpc2clk
Provide support for following features
*Domains: Currently GPCCLK is supported
*clk Range: From P0 min to P0 max
*Freq Points: Gives the VF curve from PMU
*Default: Default value(P0 Max)
*Current Pstate: P0 is supported
All request for change is freq is validated against P0 value
Out of bound values are trimmed to match the Pstate limits
Multiple requests are supported and max of that will be set
Requests are sent to PMU via change sequencer
Bug 200454682
JIRA NVGPU-1653
Change-Id: I36735fa50c7963830ebc569a2ea2a2d7aafcf2ab
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1982078
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 10.1 mandates that the correct data types are used as
operands of operators. For example, only unsigned integers can be used
as operands of bitwise operators.
This patch fixes rule 10.1 vioaltions for drivers/gpu/nvgpu/common.
JIRA NVGPU-777
JIRA NVGPU-1006
Change-Id: I53fe750f1b41816a183c595e5beb7bd263c27725
Signed-off-by: Sai Nikhil <snikhil@nvidia.com>
Signed-off-by: Adeel Raza <araza@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1971221
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 10.1 prohibits using signed values with bitwise operators.
Make fifo invalid ID macros compliant with this MISRA rule.
Also use these macros in source code instead of hardcoded numbers to
make the code more readable.
JIRA NVGPU-1006
Change-Id: I2f336d1decbc53b08f93587f2e00ea2cce47f72b
Signed-off-by: Adeel Raza <araza@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1983700
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Current code creats golden image using dedicated gr_ctx called
GOLDEN_CTX. But on RM server it's no easy to create a GOLDEN_CTX since
virtual addresses are managed by guest OSes. There's no special reason
why we have to use a separate gr_ctx for golden image. This patch moves
it to use current channel gr_ctx. And the function will be re-useable
by RM server.
Jira GVSCI-191
Change-Id: I9920703e61f7e1d8b3ad6612811e47a3815d0c0f
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1983702
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Split out native-specific engine info collection out of
nvgpu_init_runlist() so that it only contains common code. Call this
common function from vgpu code that ends up being identical.
Jira NVGPU-1309
Change-Id: I9e83669c84eb6b145fcadb4fa6e06413b34e1c03
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1978060
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Extract non-chip-specific code that manages the runlists (init, update,
reschedule etc.) to a new file in the common directory. Move the
declarations to a new matching runlist.h header.
Jira NVGPU-1309
Change-Id: I3c7e0032899516487037f47ddc9a7e7aa4b0b33a
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1978058
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add common/falcon/falcon_priv.h file that will contain declarations
private to Falcon unit. Clean up the falcon header files inclusion.
Rules followed:
1. Remove unneeded header file includes.
2. Falcon unit source files will only include falcon_priv.h.
3. Base architecture Falcon source (falcon_gk20a.c) will only
include hw_falcon_*.h file.
4. Derived architecture source will include hw headers if needed.
5. Other units should not include hw headers for Falcon.
6. HAL source will include the Falcon unit header if needed.
JIRA NVGPU-1459
Change-Id: Ia9f03f7b577fe10b8c0f417e6302fa7ebd4131cc
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1961634
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
With intention to make falcon header free of private data we are making
all falcon struct members (pmu.flcn, sec2.flcn, fecs_flcn, gpccs_flcn,
nvdec_flcn, minion_flcn, gsp_flcn) in the gk20a, pointers to struct
nvgpu_falcon. Falcon structures are allocated/deallocated by
falcon_sw_init & _free respectively.
While at it, remove duplicate gk20a.pmu_flcn and gk20a.sec2_flcn,
refactor flcn_id assignment and introduce falcon_hal_sw_free.
JIRA NVGPU-1594
Change-Id: I222086cf28215ea8ecf9a6166284d5cc506bb0c5
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1968242
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
pmu.g & sec2.g were set in nvgpu_falcon_sw_init. They are now set
in nvgpu_early_init_pmu_sw & nvgpu_init_sec2_setup_sw. Pass gk20a
& pmu struct to nvgpu_init_pmu_fw_support like sec2.
pmu_fw_support & sec2_setup_sw are separated from respective init
sequence and now are called earlier since we need ->g member earlier
and most of the setup is sw only.
nvgpu_init_pmu_fw_ver_ops is now being exported.
JIRA NVGPU-1594
Change-Id: I6c71c6730ce06dad190159269e2cc60301f0237b
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1968241
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new unit common/gr/global_ctx.c to manage GR global context buffers
This unit provides interfaces to allocate/free/map/unmap all the global
context buffers. It also provides APIs to get/set size of the buffers,
and to get memory handle of the buffers
Use interfaces exposed by this unit instead of directly accessing global
context buffers in common code
Add new header file include/nvgpu/gr/global_ctx.h to declare all the
interfaces.
Rename "struct gr_ctx_buffer_desc" to "struct nvgpu_gr_global_ctx_buffer_desc"
which holds all data for each global context
Remove void *priv since it is no longer used
Add size to the desc structure to store the requested size
Remove global_ctx_buffer_size from struct nvgpu_gr_ctx since it is no longer
used for any real purpose
Jira NVGPU-1625
Change-Id: I3feaf47bc2fdf192f36b136f2ef80a49d1782c5d
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1977884
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule-17.7 requires the return value of all functions to be used.
Fix is either to use the return value or change the function to return
void. Most of the time, callers of pmu_wait_message_cond ignore the
return value. This patch changes the signature to return void, and adds
a new pmu_wait_message_cond_status for callers that need the return
information.
JIRA NVGPU-677
Change-Id: Ibaa15b04c4d40a7de73f39a7d6eb68f9e3da71f3
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1978211
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move the nvlink HAL code to unit specific directory as part
of nvgpu restructing.
This move is done after removing usage of other unit's hardware
headers from nvlink. Also confirmed that no other unit files are
including nvlink hardware headers.
JIRA NVGPU-966
Change-Id: I301e3f8de37c5792a3e1e799b97e5fdfc131f058
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1975259
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule 10.1 states that operands shall not be of an
inappropriate essential type.
For example, the use of bitwise OR on signed values is not
permitted.
Both the pmu_read_message() and sec2_read_message() routines
do this in some cases when an error (or unexpected number of
bytes) is returned from the falcon queue pop/rewind routines.
This patch eliminates the MISRA violations by modifying these
cases to return the falcon queue operation error unmodified in the
corresponding status argument (or use -EINVAL in the event the
requested number of bytes isn't returned).
To reduce code duplication new pmu_falcon_queue_read() and
sec2_falcon_queue_read() routines are added here to wrap the
code that handles the error for the respective units.
Note that higher up in the call sequence (tu104_sec2_isr() in the
sec2_read_message() case and gk20a_pmu_isr() in the pmu_read_message()
case) the actual status value is only checked for non-zero or ignored
altogether. So it appears no existing code would depend on the
bitwise OR result anyway.
JIRA NVGPU-650
Change-Id: Id303523ac096f1989e612044082e0a62ae8179c2
Signed-off-by: Scott Long <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1972624
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The device_info table is an array of registers which contain engine
specific data for engines like CE, graphics, nvdec, ioctrl etc.
These registers contain data like intr_enum, reset_enum, pri_base
and so on. The Top unit would include HAL to parse this table and
get data for a particular engine.
Some engines like CE have multiple entries in the device_info table
corresponding to each instance of the engine. Prior to Pascal, each
instance of an engine was denoted by different engine type.
For example in GM20B, there are engine types like COPY_ENGINE0,
COPY_ENGINE1 and so on. In Pascal and chips beyond, a new field
called "inst_id" is added and the engine_type is kept the same.
For example in GP10B, all copy engine entries have same engine type
i.e ENGINE_LCE, but different inst_ids. So for Pascal and chips
beyond, add HAL to get number of entries corresponding to an engine
type.The "get_device_info" HAL will parse a specific instance
of the engine using inst_id argument
JIRA NVGPU-1053
Change-Id: Ie3058b1c1bfdd87bfa47e5f037d049d9d50cfc0b
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1969399
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule 16.4 emphasizes on having a non-empty default label
for every switch case
MISRA Rule 16.6 emphasizes that every switch statement
shall have atleast two switch-clauses
JIRA NVGPU-1545
JIRA NVGPU-1557
Change-Id: I2d124ac0d66d8c490c59d262ddc647045d455633
Signed-off-by: Divya Singhatwaria <dsinghatwari@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1970216
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The PMU pstate deinit was invoked part of gpu power off. This frees and clears
the pmgr_pmu struct which causes the pmu remove support to crash when it
tries to access the pmgr_pmu object for freeing up the pmu board objects.
Deferred pstate deinit to nvgpu driver removal as there is no reason for it be
invoked part of prepare poweroff sequence.
JIRA NVGPU-1618
Change-Id: I2eb52000f0732d0abed54946e0843367b119d443
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1971225
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a_fifo_recover_tsg does high-level software calls and
invokes gk20a_fifo_recover. This function belongs to the tsg unit and
is moved to tsg.c file. Also, the function is renamed to
nvgpu_tsg_recover.
Jira NVGPU-1237
Change-Id: Id1911fb182817b0cfc47b3219065cba6c4ca507a
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1970034
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a_fifo_recover_ch does high-level calls and invokes
gk20a_fifo_recover. This function belongs to the channel unit and is
moved to the file channel.c. Also, the function is renamed to
nvgpu_channel_recover.
Jira NVGPU-1237
Change-Id: I31890f85fdb2c42648cc063dd9c4e7e35930dcef
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1970033
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Any tsg specific functions that does high-level software-centric
operations below to the TSG unit and not the FIFO unit.
Move the below public functions as well as their dependent
static functions to common/fifo/tsg.c and also rename them to use the
prefix nvgpu_tsg_*
gk20a_fifo_set_ctx_mmu_error_tsg
gk20a_fifo_abort_tsg
gk20a_fifo_error_tsg
gk20a_fifo_check_tsg_ctxsw_timeout
Jira NVGPU-1237
Change-Id: I4e3da821a878d4b4a0a0b53fbb7f4c10f135f58d
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1934299
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Any channel specific functions having high-level software-centric
operations belong to the channel unit and not the FIFO unit.
Move the below public functions as well as their dependent
static functions to common/fifo/channel.c. Also, rename the functions
to use the prefix nvgpu_channel_*.
gk20a_fifo_set_ctx_mmu_error_ch
gk20a_fifo_error_ch
gk20a_fifo_check_ch_ctxsw_timeout
Jira NVGPU-1237
Change-Id: Id6b6d69bbed193befbfc4c30ecda1b600d846199
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1932358
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA rule 16.3 states all switch clause to have break statement.
Fixing the missing break statement for default case.
Two consecutive labels without statement need not have break.
So no break is added for case without any statement.
This also makes the switch statement well-formed covering 16.1.
JIRA NVGPU-1510
JIRA NVGPU-1536
Change-Id: I2c16888cbcb429f49f1f260e18b7c6eba55aa83c
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1964328
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove gp106 and add gv100 unit test
This is as a part of removing gp106 support
This adds testing for gv100 to the fuse unit test
Removes check_sec/non_sec as they are not used
Removes delta SRAM fuse as they are not present in GV100
Bug 200457373
Change-Id: I9bb4b714500eae01d0df00bb9f6842d4d4fbfd12
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1960034
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GSPLITE falcon base address was being set without invoking hal api.
This patch defines gpu_ops.gsp.falcon_base_addr hal api to get this
base address.
JIRA NVGPU-1587
Change-Id: Id187b34d022f90c09b8762cdab7769323b607cc0
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1969432
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
