Add new unit common.gr.setup that provides runtime setup interfaces to
other units outside of GR unit or to OS-specific code
Move zcull setup call to this unit.
New unit now exposes nvgpu_gr_setup_bind_ctxsw_zcull() to setup zcull
This API internally calls common.gr.zcull API nvgpu_gr_zcull_ctx_setup()
Add new hal g->ops.gr.setup.bind_ctxsw_zcull() and remove
g->ops.gr.zcull.bind_ctxsw_zcull()
Remove nvgpu_channel_gr_zcull_setup() from channel unit
Also remove ctx/subctx header includes sicne channel code need not
configure zcull
Remove gm20b_gr_bind_ctxsw_zcull() since binding is done from common
code
Jira NVGPU-1886
Change-Id: I6f04d19a8b8c003734702c5f6780a03ffc89b717
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2086602
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove locally defined timeout call in gr and use common timeout
call.
Replace nvgpu_gr_get_idle_timeout with nvgpu_get_poll_timeout function
Replace following defines to
NVGPU_GR_IDLE_CHECK_DEFAULT_US ---> POLL_DELAY_MIN_US
NVGPU_GR_IDLE_CHECK_MAX_US ---> POLL_DELAY_MIN_US
JIRA NVGPU-1885
Change-Id: I4514a9763fe0687680d50704bc9f22677a1a3df9
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2085031
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Code for secure/non-secure ctxsw booting spread across gr_gk20a.c
and gr_gm20b.c. With this change this code is move to gr falcon unit.
Ctxsw loading is now supported with 2 supported common functions:
1.Non secure boot:
int nvgpu_gr_falcon_load_ctxsw_ucode(struct gk20a *g);
2.Secure boot:
int nvgpu_gr_falcon_load_secure_ctxsw_ucode(struct gk20a *g);
Now gr ops function "int (*load_ctxsw_ucode)(struct gk20a *g);" is moved to
gr falcon ops and in chip hals it is set with secure/non-secure booting.
Non-secure booting: nvgpu_gr_falcon_load_ctxsw_ucode support ctxsw loading
in 2 methods: bit-banging uode or booting with bootloader
A. Common and hal functions for non-secure bit-banging ctxsw loading:
Common: static void nvgpu_gr_falcon_load_dmem(struct gk20a *g) ->
Hals: void (*load_gpccs_dmem)(struct gk20a *g,i
const u32 *ucode_u32_data, u32 size);
void (*load_fecs_dmem)(struct gk20a *g,
const u32 *ucode_u32_data, u32 size);
Common: static void nvgpu_gr_falcon_load_imem(struct gk20a *g) ->
Hals: void (*load_gpccs_imem)(struct gk20a *g,
const u32 *ucode_u32_data, u32 size);
void (*load_fecs_imem)(struct gk20a *g,
const u32 *ucode_u32_data, u32 size);
Other basic HALs:
void (*configure_fmodel)(struct gk20a *g); -> configure fmodel for ctxsw loading
void (*start_ucode)(struct gk20a *g); -> start running ctxcw ucode
B.Common and hal functions for non-secure ctxsw loading with bootloader
First get the ctxsw ucode using: nvgpu_gr_falcon_init_ctxsw_ucode, then
Common: static void nvgpu_gr_falcon_load_with_bootloader(struct gk20a *g)
void nvgpu_gr_falcon_bind_instblk((struct gk20a *g) ->
Hal: void (*bind_instblk)(struct gk20a *g, struct nvgpu_mem *mem, u64 inst_ptr);
Common: nvgpu_gr_falcon_load_ctxsw_ucode_segments ->
nvgpu_gr_falcon_load_ctxsw_ucode_header ->
nvgpu_gr_falcon_load_ctxsw_ucode_boot for both fecs and gpccs ->
Hals: void (*load_ctxsw_ucode_header)(struct gk20a *g, u32 reg_offset,
u32 boot_signature, u32 addr_code32, u32 addr_data32,
u32 code_size, u32 data_size);
void (*load_ctxsw_ucode_boot)(struct gk20a *g, u64 reg_offset, u32 boot_entry,
u32 addr_load32, u32 blocks, u32 dst);
Other basic HAL to get gpccs start offset:
u32 (*get_gpccs_start_reg_offset)(void);
C.Secure booting is support with gpmu and acr and with following additional
common function in gr falcon.
static void nvgpu_gr_falcon_load_gpccs_with_bootloader(struct gk20a *g) ->
nvgpu_gr_falcon_bind_instblk and nvgpu_gr_falcon_load_ctxsw_ucode_segments
Additional basic hals:
void (*start_gpccs)(struct gk20a *g);
void (*start_fecs)(struct gk20a *g);
Following ops from gr is removed, since it is not required to set by chip hals:
void (*falcon_load_ucode)(struct gk20a *g, u64 addr_base,
struct gk20a_ctxsw_ucode_segments *segments, u32 reg_offset);
Now this is handled by static common function:
static int nvgpu_gr_falcon_copy_ctxsw_ucode_segments( struct gk20a *g,
struct nvgpu_mem *dst, struct gk20a_ctxsw_ucode_segments *segments,
u32 *bootimage, u32 *code, u32 *data)
JIRA NVGPU-1881
Change-Id: I895a03faaf1a21286316befde24765c8b55075cf
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2083388
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move functions related to init_ctxsw_ucode to common
falcon from gr_gk20a.c. Modified code to call this new
function and modified function names in common falcon
to reflect new re-org.
JIRA NVGPU-1881
Change-Id: I389f5c902bfbec17cdb4b16840a5ba66f6b1e331
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2081331
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove use of struct gk20a and struct gr_gk20a from common.gr.config
hal functions.
This requires a reference to struct gk20a *g for many nvgpu_* ops. Also,
nvgpu_gr_config is updated to include sm_count_per_tpc.
JIRA NVGPU-1884
Change-Id: I874c2b3970d97ef3940b74d8ef121a7261061670
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2075681
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Change the global_ctx_buffer_index member in the nvgpu_gr_ctx struct
to be an enum nvgpu_gr_global_ctx_index. global_ctx_buffer_index is
used as an array of these indicies, but had been declared as an int.
This change resolves a number of MISRA Rule 10.3 violations for implicit
assignment of objects of different essential or narrower type.
In order to use this enum, it is moved out of global_ctx.h into a new
header file ctx_common.h that can be used by both ctx.h and global_ctx.h.
JIRA NVGPU-2955
Change-Id: I5e399ba3b0821d696aa0b9909d3bc6bbe99d274c
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2075753
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move load_smid_config and program_sm_id_numbering hal functions to
corresponding hal files in hal.gr.init.
Add new hal for get_sm_id_size and new static function in common.gr
init code for gr_load_sm_id_config.
JIRA NVGPU-2951
Change-Id: I27755306d278db9fcd5ab60169a64057b2989ea8
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2075875
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move load_tpc_mask and setup_rop_mapping hal functions to hal.gr.init.
Existing load_tpc_mask hal code is split to two parts, one as a common
code in gr_load_tpc_mask and register write to init.tpc_mask hal
functions.
Modify pd_tpc_per_gpc and pd_skip_table_gpc hals in the
hal.gr.init to pass struct nvgpu_gr_config as a parameter.
JIRA NVGPU-2951
Change-Id: I52e26d0f023afa511a8cf8c3e4c54f45350be4ae
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2074892
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
nvgpu_gr_ctx_load_golden_ctx_image() in common.gr.ctx unit programs
initial pm_mode in context. gk20a_alloc_obj_ctx() then disables pm_mode
ctxsw by default.
Fix this by disabling pm_mode ctxsw by default in
nvgpu_gr_ctx_load_golden_ctx_image() itself. Remove corresponding code
from gk20a_alloc_obj_ctx()
Jira NVGPU-1887
Change-Id: I6e1f83cefcb6229394da353e4cd87f1f5a0b10d4
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2076273
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below two new APIs to set preemption buffer in graphics context or
subcontext respectively
nvgpu_gr_ctx_set_preemption_buffer_va()
nvgpu_gr_subctx_set_preemption_buffer_va()
Remove g->ops.gr.set_preemption_buffer_va() hal and use above APIs to
set preemption buffer VA.
Jira NVGPU-1887
Change-Id: I38fb76eaf01d3fc73fd8104f30bcd89be9fa45b6
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2076272
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
To avoid the other hal calls from gr_gv11b_init_fs_state
and gr_gm20b_init_fs_state hal, move the load_tpc_mask and
load_smid_config hal to nvgpu_gr_init_fs_state common gr function.
bes_zrop_setting and bes_crop_setting for active_ltcs is moved before
the nvgpu_gr_init_fs_state call from those hals.
replace gk20a_writel and gk20a_readl in modified hal function with
nvgpu_writel and nvgpu_readl.
JIRA NVGPU-1885
Change-Id: Ic0bf4a4bfa4da032f33bbe4af89031bbbdd9cd94
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2072414
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move g->ops.fecs_trace.*() HAL operations under gr operations as
g->ops.gr.fecs_trace.*()
Also rename gk20a_ctxsw_*() functions used in common code to the
format nvgpu_gr_fecs_trace_*()
Jira NVGPU-1880
Change-Id: Idf2f8fb3d7ba2832bf1837fd97b70b3cee412123
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2070767
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We have 3 header files for FECS tracing support
include/nvgpu/gr/fecs_trace.h : common header
include/nvgpu/ctxsw_trace.h : header that includes both common and
os-specific functions
os/linux/ctxsw_trace.h : linux specific header
Remove the second header since it is not needed.
Move all structures that are needed in common code to
include/nvgpu/gr/fecs_trace.h
Move all function declarations that are needed in common code to
include/nvgpu/gr/fecs_trace.h
Move all linux specific declarations in os/linux/ctxsw_trace.h and
rename this file as os/linux/fecs_trace_linux.h
Also rename os/linux/ctxsw_trace.c to os/linux/fecs_trace_linux.c
Jira NVGPU-1880
Change-Id: I05cc4489c4b6a64880b7d59c02b22cd2244d5e22
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2070766
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In case of FBPA we need to consider mask of active FBPAs on dGPUs.
For that we have GR unit HAL g->ops.gr.add_ctxsw_reg_pm_fbpa()
Generic support to consider active mask of unit need not be in a HAL,
move it to common code in add_ctxsw_buffer_map_entries_subunits() itself
This API now supports providing active_unit_mask as its parameter
In case we don't need to consider unit mask caller will simply pass
~U32(0U) to indicate all units are active
In case of FBPA, add a new HAL g->ops.gr.hwpm_pm.get_active_fbpa_mask()
which gets mask of active FBPAs, and pass this value to common API
add_ctxsw_buffer_map_entries_subunits()
Jira NVGPU-2895
Change-Id: I0d208ce53abcd36929c25a4d248868d6eaa5c70d
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2069472
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Create a new HAL unit hal.gr.hwpm_map that provides chip specific
support to common.gr.hwpm_map unit
We currently have common.gr HAL g->ops.gr.add_ctxsw_reg_perf_pma()
to handle chip specific alignment of perf_pma list
We only adjust the offset of list and remaining code is same
Hence delete above HAL, and add new HAL under hal.gr.hwpm_map
g->ops.gr.hwpm_map.align_regs_perf_pma() which returns correct
alignment if HAL is defined
Remove gr_gv100_add_ctxsw_reg_perf_pma() and
gr_gk20a_add_ctxsw_reg_perf_pma() APIs since they are no longer used
Simplify perf_pma parsing by fixing alignment with new HAL and then
directly calling add_ctxsw_buffer_map_entries()
Jira NVGPU-2895
Change-Id: I1852db846e1f5441e482028c79a3f39c5142b0c2
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2069471
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rename gp10b/fecs_trace_tu104.* files to
common/gr/fecs_trace/fecs_trace_gp10b.*
Also move HAL API gp10b_fecs_trace_flush() to gr/fecs_trace unit
Remove fecs_trace_gp10b.h header include from rest of the code
Jira NVGPU-1880
Change-Id: Ia27c70ed7071751c17345f65599591be1e34c49d
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2032708
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move below calls to gr/fecs_trace unit
gk20a_fecs_trace_bind_channel()
gk20a_fecs_trace_unbind_channel()
And rename them to
nvgpu_gr_fecs_trace_bind_channel()
nvgpu_gr_fecs_trace_unbind_channel()
We are not accessing any fifo/ch/tsg construct in gr/fecs_trace unit
hence update parameter list of above APIs to receive inst_block,
gr_ctx, subctx pointers directly instead of receiving channel_gk20a
Delete gk20a/fecs_trace_gk20a.* files since they are no longer
required. All the contents in those files are now moved to gr/fecs_trace
unit
Jira NVGPU-1880
Change-Id: I7ef9f0b66781b45155035237172ae400f02740e4
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2032707
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Create new unit common.gr.hwpm_map with source file common/gr/hwpm_map.c
and public header include/nvgpu/gr/hwpm_map.h
Move all APIs in gr_gk20a.c that handle hwpm_map functionality to this
new unit. This unit now exposes below struct that is included in struct
gr_gk20a
struct nvgpu_gr_hwpm_map {
u32 pm_ctxsw_image_size;
u32 count;
struct ctxsw_buf_offset_map_entry *map;
bool init;
}
Expose below APIs
nvgpu_gr_hwpm_map_init() - initialize HWPM map meta-data with given size
nvgpu_gr_hwpm_map_deinit() - deinitialize HWPM map
nvgpu_gr_hwmp_map_find_priv_offset() - find a given offset in the map
The sequence to create the map by reading various netlist segments is
moved to a static API nvgpu_gr_hwpm_map_create()
Jira NVGPU-2894
Change-Id: I07d31169d2ff18a496eb79a726027b847d5f0e06
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2032777
GVS: Gerrit_Virtual_Submit
Reviewed-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added support to disable/skip to load LS PMU based on PMU support flag,
when LS PMU skipped only basic PMU engine ops are needed for HS ACR
to load & execute on PMU engine falcon,
GR LS falcons cold/recovery bootstrap will be taken care by ACR as HS
ACR will be loaded for both case & exits by halting in non-secure mode.
JIRA NVGPU-173
Change-Id: I7288c185a9ca2e18b2689aa8a7e0c27a61dd12f5
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2019927
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
FECS trace deinit routine was not checking if tracer was enabled
when attempting to stop the tracer thread. This causes thead stop to
fail when trace is not running.
Jira NVGPU-2801
Change-Id: I09f5eb3c4f498434e6e30394ee675e7745cfde5d
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2029941
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Rename gv11b/fecs_trace_gv11b.* files to
common/gr/fecs_trace/fecs_trace_gv11b.*
Also move HAL API gk20a_fecs_trace_get_buffer_full_mailbox_val()
to gr/fecs_trace unit and rename it as
gm20b_fecs_trace_get_buffer_full_mailbox_val()
Protect gm20b/gv11b HAL code under CONFIG_GK20A_CTXSW_TRACE
Remove tu104/fecs_trace_tu104.* since tu104 will re-use gv11b HAL
Fix g->ops.fecs_trace.get_buffer_full_mailbox_val() for vgpu/gv11b and
use gv11b HAL
Jira NVGPU-1880
Change-Id: If78480e36be4e5f0fd659019518f233d8805486d
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2029259
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Remove below calls from fecs_trace_gk20a.c
gk20a_fecs_trace_ring_read()
gk20a_fecs_trace_poll()
gk20a_fecs_trace_periodic_polling()
gk20a_fecs_trace_reset()
And move them to common gr/fecs_trace unit with below renames
nvgpu_gr_fecs_trace_ring_read()
nvgpu_gr_fecs_trace_poll()
nvgpu_gr_fecs_trace_periodic_polling()
nvgpu_gr_fecs_trace_reset()
Also update above calls to support QNX use cases by adding
vm_update_mask as a parameter
Add below HALs for QNX support. These HALs will not be set for linux
g->ops.fecs_trace.vm_dev_write()
g->ops.fecs_trace.vm_dev_update()
Jira NVGPU-1880
Change-Id: Idc305b9288a1df5ca86622b95d6e62a23fdfde7e
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2029258
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move below APIs from gk20a/fecs_trace_gk20a.c
gk20a_fecs_trace_enable()
gk20a_fecs_trace_disable()
gk20a_fecs_trace_is_enabled()
gk20a_fecs_trace_reset_buffer()
gk20a_fecs_trace_buffer_size()
gk20a_gr_max_entries()
and move them to new gr/fecs_trace unit with below renames
nvgpu_gr_fecs_trace_enable()
nvgpu_gr_fecs_trace_disable()
nvgpu_gr_fecs_trace_is_enabled()
nvgpu_gr_fecs_trace_reset_buffer()
nvgpu_gr_fecs_trace_buffer_size()
nvgpu_gr_fecs_trace_max_entries()
Use new functions in the driver instead of old ones
Export gk20a_fecs_trace_periodic_polling() in fecs_trace_gk20a.h
header since it is needed in gr/fecs_trace for transition
This include and the function itself will be later moved to
gr/fecs_trace unit
Move struct nvgpu_gpu_ctxsw_trace_filter and all filter TSG
macros in the form NVGPU_GPU_CTXSW_TAG_* to gr/fecs_trace.h
Jira NVGPU-1880
Change-Id: Ic95b99554e626033a111452f311bbc026ec604e2
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2027530
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move struct gk20a_fecs_trace_record to gr/fecs_trace unit and rename
it as struct nvgpu_fecs_trace_record
Move all of the APIs in nvgpu/fecs_trace.h to nvgpu/gr/fecs_trace.h
and rename them in nvgpu_gr_fecs_trace_*() format
Delete nvgpu/fecs_trace.h
Add new HAL unit common/gr/fecs_trace/fecs_trace_gm20b.c for register
accesses needed for gr/fecs_trace unit
Add below new HALs in this HAL unit
g->ops.fecs_trace.get_read_index()
g->ops.fecs_trace.get_write_index()
g->ops.fecs_trace.set_read_index()
Jira NVGPU-1880
Change-Id: Ib6ee32ba0d2f8a8a3e82491057e2f01a0275fcf4
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2024973
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move struct gk20a_fecs_trace to new gr/fecs_trace unit and rename
it as struct nvgpu_gr_fecs_trace
Add enable_lock mutex and enable_count to this structure to support
QNX use cases
Remove init field from struct gk20a_fecs_trace
Rename gk20a_fecs_trace_init() to nvgpu_gr_fecs_trace_init() and
move it to new unit
Rename gk20a_fecs_trace_deinit() to nvgpu_gr_fecs_trace_deinit()
and move it to new unit
Update gk20a_fecs_trace_enable() to start thread only when
enable_count == 1, otherwise we just increment enable_count
Update gk20a_fecs_trace_disable() to stop thread when
enable_count == 0, otherwise we just decrement enable_count
Before this patch struct gk20a_fecs_trace was not visible in new
unit, and hence all mutex_acquire for list_lock were done in
fecs_trace_gk20a.c file
Since new struct is now available in new unit, move mutex_lock/release
calls to gr/fecs_trace unit now
Jira NVGPU-1880
Change-Id: I5abfa0165fa1c31716f3d6f2f669284f8959d7cf
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2024562
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved zbc related files to common/gr/zbc location.
struct nvgpu_gr_zbc created for zbc variables.
common zbc functions are moved to gr_zbc.c file.
All zbc hal functions are moved with corresponding chip specific
filename.
JIRA NVGPU-1882
Change-Id: I1bdaa2d9416e6e77ab305f117647dc070438ee86
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2019760
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Create new gr/fecs_trace unit with common/gr/fecs_trace/fecs_trace.c
as common source file and include/nvgpu/gr/fecs_trace.h as common
header file
This unit will be common between Linux and QNX
Corresponding HAL files will be added under common/gr/fecs_trace/
as more functionality is moved to new unit
For now move struct gk20a_fecs_trace_hash_ent to new unit and
rename it as struct nvgpu_fecs_trace_context_entry
Add vmid field to this struct since it is required for QNX
Remove use of hashtables and simply use linked list to simplify
the code. FECS tracing is not a performance sensitive use case
so perf hit could be ignored
Rename hash_lock mutex to list_lock
struct gk20a_fecs_trace and mutex list_lock are still declared in
gk20a/fecs_trace_gk20a.c, hence they cannot be used in new unit yet
Rename and update all gk20a_fecs_trace_hash_*() APIs to appropriate
nvgpu_gr_fecs_trace_*() APIs
Remove gk20a_fecs_trace_hash_dump() since it is not being used
Jira NVGPU-1880
Change-Id: I89c2715baa770dbbd864ea70ab43d83d98ba693c
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2022903
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
