The fb APIs compression_page_size() and compression_align_mask() were
returning u32s, but the users all really need u64s.
This also eliminates MISRA Rule 10.3 violations for implicit casts to
smaller size objects.
JIRA NVGPU-2954
Change-Id: I8dc2b434d9564c89c0e8a1b19c4acbe167e339c1
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2075595
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Native and vgpu were using different paths for fifo
init/deinit code.
Use same nvgpu_fifo_init_support for init code:
nvgpu_fifo_init_support
g->ops.fifo.setup_sw
vgpu_fifo_setup_sw (NEW)
Use same nvgpu_fifo_remove_support for deinit code:
nvgpu_fifo_remove_support (NEW)
g->ops.fifo.cleanup_sw (NEW)
vgpu_fifo_cleanup_sw (NEW)
Also implemented gk20a_fifo_cleanup_sw for native case.
Jira NVGPU-1306
Jira NVGPU-2855
Change-Id: Iefe303cc224f804a206422e2efffda9da1616d89
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2029649
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move code used for transitioning between link and sublink modes
into a separate unit called 'link_mode_transition' under subelement
'nvlink'.
Also aggregate all the link/sublink mode related ops under
g->ops.nvlink.link_mode_transitions.
JIRA NVGPU-2862
Change-Id: I289faa10fd1c83b6b8d028b44fe244531ca42b15
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2035794
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved cbc related code and data from gr to cbc unit.
Ltc and cbc related data is moved from gr header:
1. Ltc related data moved from gr_gk20a -> gk20a and it
will be moved eventually to ltc unit:
u32 slices_per_ltc;
u32 cacheline_size;
2. cbc data moved from gr_gk20a -> nvgpu_cbc
u32 compbit_backing_size;
u32 comptags_per_cacheline;
u32 gobs_per_comptagline_per_slice;
u32 max_comptag_lines;
struct gk20a_comptag_allocator comp_tags;
struct compbit_store_desc compbit_store;
3. Following config data moved gr_gk20a -> gk20a
u32 comptag_mem_deduct;
u32 max_comptag_mem;
These are part of initial config which should be available
during nvgpu_probe. So it can't be moved to nvgpu_cbc.
Modified code to use above updated data structures.
Removed cbc init sequence from gr and added in
common cbc unit. This sequence is getting called
from common nvgpu init code.
JIRA NVGPU-2896
JIRA NVGPU-2897
Change-Id: I1a1b1e73b75396d61de684f413ebc551a1202a57
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2033286
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new hal operation g->ops.gr.init.fe_go_idle_timeout() in hal.gr.init
unit to enable/disable fe_go_idle timeout
Use this hal in gr_gk20a_init_golden_ctx_image() instead of direct
register access
Remove timeout disable/enable code in gk20a_init_sw_bundle() since
parent API gr_gk20a_init_golden_ctx_image() is already taking care of
that
Jira NVGPU-2961
Change-Id: Ice72699059f031ca0b1994fa57661716a6c66cd2
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2072550
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move GR HAL operation g->ops.gr.init_preemption_state() to hal.gr.init
unit as g->ops.gr.init.preemption_state()
Create hal.gr.init unit files for gp10b and gv11b and copy over
corresponding functions to new files
This API now takes gfxp_wfi_timeout_unit and gfxp_wfi_timeout_count as
parameter
Define gfxp_wfi_timeout_unit in struct gr_gk20a as a boolean flag named
gfxp_wfi_timeout_unit_usec
Remove GFXP_WFI_TIMEOUT_UNIT_SYSCLK/USEC macros
Jira NVGPU-2961
Change-Id: I4347b1e30c86c231e44cf274adccd8c70addcdab
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2072549
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move g->ops.fecs_trace.*() HAL operations under gr operations as
g->ops.gr.fecs_trace.*()
Also rename gk20a_ctxsw_*() functions used in common code to the
format nvgpu_gr_fecs_trace_*()
Jira NVGPU-1880
Change-Id: Idf2f8fb3d7ba2832bf1837fd97b70b3cee412123
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2070767
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We have 3 header files for FECS tracing support
include/nvgpu/gr/fecs_trace.h : common header
include/nvgpu/ctxsw_trace.h : header that includes both common and
os-specific functions
os/linux/ctxsw_trace.h : linux specific header
Remove the second header since it is not needed.
Move all structures that are needed in common code to
include/nvgpu/gr/fecs_trace.h
Move all function declarations that are needed in common code to
include/nvgpu/gr/fecs_trace.h
Move all linux specific declarations in os/linux/ctxsw_trace.h and
rename this file as os/linux/fecs_trace_linux.h
Also rename os/linux/ctxsw_trace.c to os/linux/fecs_trace_linux.c
Jira NVGPU-1880
Change-Id: I05cc4489c4b6a64880b7d59c02b22cd2244d5e22
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2070766
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Access to falcon's EMEM has to be synchronized to ensure atomic access
to EMEM control and data registers. Add this locking.
Not all falcons support EMEM hence handle mutex based on the enabled
flag emem_supported that is set only for TU104 currently.
JIRA NVGPU-1993
Change-Id: Idaedfb564ea0068d4690a2717d7983eb2384a69f
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2030618
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Earlier falcon HAL ops were embedded in the falcon structure. For clear
separation of common and HAL these ops will have to be accessed through
g->ops.falcon interfaces.
With these changes nvgpu_falcon_* functions directly call falcon gpu
ops functions for falcon. Falcon registers and HAL functions are
exported from falcon_gk20a.h. HAL files per platform are now
updated with base falcon functions.
Falcon software state such as is_falcon_supported, is_interrupt_enabled
and flcn_base are set from software init functions defined per chip.
JIRA NVGPU-2038
Change-Id: Ib1729d2833cd2c6c7b2c8ed7cbc17d4d6daeba73
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2023077
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This struct was earlier moved to falcon_priv.h to give exclusive access
to only falcon unit. However with HAL unit needing access to this we
need to move it public header nvgpu/falcon.h.
JIRA NVGPU-1993
Change-Id: Ia3b211798009107f64828c9765040d628448812a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2069688
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add fifo sub-unit to common.fifo to handle init/deinit code
and global support functions.
Split init into:
- nvgpu_channel_setup_sw
- nvgpu_tsg_setup_sw
- nvgpu_fifo_setup_sw
- nvgpu_runlist_setup_sw
- nvgpu_engine_setup_sw
- nvgpu_userd_setup_sw
- nvgpu_pbdma_setup_sw
Split de-init into
- nvgpu_channel_cleanup_sw
- nvgpu_tsg_cleanup_sw
- nvgpu_fifo_cleanup_sw
- nvgpu_runlist_cleanup_sw
- nvgpu_engine_cleanup_sw
- nvgpu_userd_cleanup_sw
- nvgpu_pbdma_cleanup_sw
Added the following HALs
- runlist.length_max
- fifo.init_pbdma_info
- fifo.userd_entry_size
Last 2 HALs should be moved resp. to pbdma and userd sub-units,
when available.
Added vgpu implementation of above hals
- vgpu_runlist_length_max
- vgpu_userd_entry_size
- vgpu_channel_count
Use hals in vgpu_fifo_setup_sw.
Jira NVGPU-1306
Change-Id: I954f56be724eee280d7b5f171b1790d33c810470
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2029620
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In the commit "gpu: nvgpu: unit: update misc atomics to use gcc
builtins" the cmpxchg macro used by the "POSIX" build changed and
introduced a MISRA 17.3 violation for a macro parameter that needed
parentheses. This updates the macro to resolve this violation.
Change-Id: I16927ecaa751964f8c397c95086c663a683f8241
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2070064
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Register write from gr_gk20a_init_fs_state function are moved to hal.
New hal added for setting the pd_tpc_per_gpc, pd_skip_table_gpc and
cwd_gpcs_tpcs_num.
pd_tpc_per_gpc helps to describe the number of tpcs in each logical
gpc.
pd_skip_table helps to skip certain TPCs during distribution.
cwd_gpcs_tpcs_num helps to set number of tpcs and gpcs in CWD.
remove write for depreciated NV_PBE_PRI_ZROP_SETTING_NUM_ACTIVE_FBPS
and NV_PBE_PRI_CROP_SETTINS_NUM_ACTIVE_FBPS fields from
BES_ZROP_SETTINGS and BES_CROP_SETTINGS registers. Both these fields
changed to NUM_ACTIVE_LTCS from gm20b onwards and those are being
set in existing hal functions.
JIRA NVGPU-2951
Change-Id: I905b98356e8eadaf7e2481850de841c050ea50c5
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2072249
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
create new hals for wait_idle and wait_fe_idle under gr.init.
modify functions to following hals and use same hals for all chips.
gr_gk20a_wait_idle -> gm20b_gr_init_wait_idle
gr_gk20a_wait_fe_idle -> gm20b_gr_init_wait_fe_idle
JIRA NVGPU-2951
Change-Id: Ie60675a08cba12e31557711b6f05f06879de8965
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2072051
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Some chips bypass the IOMMU on tegra. Essentially any chip using
nvlink will fall into this category.
This imposes certain oddities in the memory management for these
chips. For these chips we do not want nor need IOMMU mappings
and the overhead that comes with doing that. Instead nvgpu can
manage allocation of pages itself.
For contiguous memory nvgpu still does need to rely on the CMA.
As such this flag can be used for determining whether to use the
special nvgpu managed page allocation (for normal allocs) or the
DMA API (and therefor the CMA) for contiguous allocs.
Bug 200444660
Change-Id: I3dc4ba6ea9523f2a59966b13527d5a416aaa761a
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2071090
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The flag NVGPU_DMA_FORCE_CONTIGUOUS simply means that the memory
or the pages should be forced contiguous. Meanwhile, the other
flag NVGPU_DMA_PHYSICALLY_ADDRESSED means that the memory should
be contiguous from GPU perspective, either physically contiguous
when IOMMU is not used, or virtually contiguous by IOMMU.
Thus the NVGPU_DMA_FORCE_CONTIGUOUS flag is now redundant.
This patch cleans up the NVGPU_DMA_FORCE_CONTIGUOUS flag.
Bug 200444660
Change-Id: I63bb06fea728b34ec2c6f831504392d42c426d55
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2035403
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
vgpu_vm_init and vgpu_vm_remove are called directly from
common code if virtualization is supported. Introduce mm
HAL ops vm_as_alloc_share and vm_as_free_share and call
these functions through these HAL ops. Also rename these functions
from vgpu_vm_init to vgpu_vm_as_alloc_share and vgpu_vm_remove to
vgpu_vm_as_free_share as these function names are too generic and
rename to reflect their actual functionality.
For now these HAL ops are initialized only for vgpu.
Jira GVSCI-517
Change-Id: I7c5af1ab5a64ce562092f75b1488524e93e8f53f
Signed-off-by: Aparna Das <aparnad@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2032310
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gr_gk20a_init_golden_ctx_image() right now resets sys/gpc/be units by
directly accessing gr_fecs_ctxsw_reset_ctl_r() register
Move this register write/read sequence to common.hal.gr.init unit
through HAL operation g->ops.gr.init.override_context_reset()
Use new HAL in gr_gk20a_init_golden_ctx_image()
Also fix the delay() operations. delay() should be added before we read
back gr_fecs_ctxsw_reset_ctl_r() register and not after
Jira NVGPU-2961
Change-Id: I70d3a61b5aa60846815dee52ecac544066542695
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2070608
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new HAL unit common.hal.gr.init with below source files
hal/gr/init/gr_init_gm20b.c
hal/gr/init/gr_init_gm20b.h
In gr_gk20a_init_golden_ctx_image() we force FE power mode on and also
disable it. Extract out this sequence into new unit and expose new HAL
operation that takes a boolean flag to enable/disable power mode
g->ops.gr.init.fe_pwr_mode_force_on()
Use new HAL operation in gr_gk20a_init_golden_ctx_image()
Set this HAL for all the chips
Jira NVGPU-2961
Change-Id: I1dd35d94fda5e5296af67c0abc944e200fb752ea
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2070607
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
To validate the imem & dmem port being accessed by nvgpu, allowed ports
need to be known from hwcfg1 register. Update the hw header with these
to use for checking the valid ports in later patch.
JIRA NVGPU-1993
Change-Id: I1146a85d452d02fefcc75065a0cd546fff688fd2
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2030622
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
set gr.initialized to false in the beginning of gk20a_gr_reset() and
set it to true at the end of successful execution of gk20a_gr_reset.
Use gk20a_gr_wait_initialized() to enable/disable cg/pg
functions to make sure engine is out of reset and initialized.
Bug 2092051
Bug 2429295
Bug 2484211
Bug 1890287
Change-Id: Ic7b0b71382c6d852a625c603dad8609c43b7f20f
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2030827
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
ACR HS ucode self-load & bootstrap functionality was part of FB
unit to support FB mem-unlock HS ucode & this needs to access
some ACR structs which will be part of ACR private headers &
adding constraints to implement ACR unit private header support.
JIRA NVGPU-2907
Change-Id: I6c6c7504ffe55426b377e9bcf911d4005813bb31
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2069724
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
struct wpr_carveout_info is used to fetch WPR info by passing
as parameter to FB HAL, changed to pass multiple params to get
WPR base & size individually from FB HAL which removes dependency
between ACR & FB.
JIRA NVGPU-2907
Change-Id: I03af1a5358fcab5dc8237899d16a0b51a6779b1f
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2069617
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currenlty struct hs_acr passed to engine falcon bootstrap function
to pass falcon info to the falcon unit to execute the ACR HS bin
using engine falcon, as engine already cached the falcon info as
part its structure so removed struct hs_acr parameter pass.
JIRA NVGPU-2907
Change-Id: I0b647b2763c52e97de0c17cfdd273486138ee404
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2069593
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The functions gk20a_dump_eng_status and gv11b_dump_eng_status belongs
to engine_status HAL unit.
1) The corresponding declaration and definitions of the above functions
are moved from fifo_{arch} files to engine_status_{arch} files.
2) The corresponding HAL pointer .dump_eng_status is moved from
fifo to engine_status HAL unit.
3) gv11b_dump_eng_status is now based to gv100b_dump_eng_status
4) Small changes in the files for ENGINE_STATUS such as correction of
HEADER DEFINES etc
Jira NVGPU-1315
Change-Id: I7fc06eab97206bc3b78c6f5c7aa30fa2c034961c
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2033632
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The corresponding HAL pointer for gk20a_fifo_wait_engine_idle is not
being invoked anywhere and hence they are removed from the code.
The function gk20a_fifo_wait_engine_idle belongs to engine unit and is
only called in a non-safe build, hence its moved to engine unit and is
restricted by a non-safe build flag NVGPU_ENGINE
Also, gk20a_fifo_wait_engine_idle is renamed to nvgpu_engine_wait_for_idle
Jira NVGPU-1315
Change-Id: Ie550c7e46a4284dfe368859d828b1994df34185f
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2033631
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The following functions belong to engine unit and are moved
gk20a_fifo_enable_engine_activity
gk20a_fifo_enable_all_engine_activity
gk20a_fifo_disable_engine_activity
gk20a_fifo_disable_all_engine_activity
These are renamed by replacing gk20a_fifo with nvgpu_engine as prefix.
These functions are only invoked by linux build and not required for
safety build and hence they are defined when
-DNVGPU_ENGINE is enabled.
Jira NVGPU-1315
Change-Id: I39d820879bb55b40e754526c657d794930a4b6a1
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2032606
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
is_fault_engine_subid_gpc HAL pointer belongs to engine HAL unit instead of
fifo. This patch moves the HAL pointer to a newly constructed engine
HAL unit.
The following new files are added under HAL/fifo/
engines_gm20b.h
engines_gm20b.c
engines_gv11b.h
engines_gv11b.c
Jira NVGPU-1315
Change-Id: If28686bf7350563b06b13348a9fe3ef0099c35b2
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2031659
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Pre-volta, cbc config is part of hw ltc and from volta onwards this is
moved to hw fb. Because of this, cbc_init functions are present in both
cbc unit and fb unit. Pre-volta uses cbc_init from cbc unit and from
volta onwards it uses cbc_init from fb unit.
With this patch, unified two cbc_init functions to cbc unit and created
new fb hal for cbc_configure. cbc unit uses fb hal for cbc_config and
fb unit is independent of cbc unit.
JIRA NVGPU-2897
Change-Id: Ib62f0b08547b031bcb5011c837e43c74931a22fe
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2030906
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Create Compression Bit Cache(CBC) unit to have comptags
cache related functionality in one place. In this patch
Moved following gpu ops from ltc to cbc and renamed accordingly:
void (*init)(struct gk20a *g, struct gr_gk20a *gr);
u64 (*get_base_divisor)(struct gk20a *g);
int (*alloc_comptags)(struct gk20a *g, struct gr_gk20a *gr);
int (*ctrl)(struct gk20a *g, enum gk20a_cbc_op op,
u32 min, u32 max);
u32 (*fix_config)(struct gk20a *g, int base);
To avoid ambiguity renamed function pointer from
init_comptags to alloc_comptags.
Moved following function from ltc.h to cbc.h:
nvgpu_ltc_alloc_cbc -> nvgpu_cbc_alloc
Also changed file name that implemented
nvgpu_cbc_alloc functionality from
os/ltc.c -> os/linux-cbc.c
JIRA NVGPU-2897
Change-Id: Ide32a98567e9a3f0a784d62221a6f484f8343e53
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2030194
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In case of FBPA we need to consider mask of active FBPAs on dGPUs.
For that we have GR unit HAL g->ops.gr.add_ctxsw_reg_pm_fbpa()
Generic support to consider active mask of unit need not be in a HAL,
move it to common code in add_ctxsw_buffer_map_entries_subunits() itself
This API now supports providing active_unit_mask as its parameter
In case we don't need to consider unit mask caller will simply pass
~U32(0U) to indicate all units are active
In case of FBPA, add a new HAL g->ops.gr.hwpm_pm.get_active_fbpa_mask()
which gets mask of active FBPAs, and pass this value to common API
add_ctxsw_buffer_map_entries_subunits()
Jira NVGPU-2895
Change-Id: I0d208ce53abcd36929c25a4d248868d6eaa5c70d
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2069472
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Create a new HAL unit hal.gr.hwpm_map that provides chip specific
support to common.gr.hwpm_map unit
We currently have common.gr HAL g->ops.gr.add_ctxsw_reg_perf_pma()
to handle chip specific alignment of perf_pma list
We only adjust the offset of list and remaining code is same
Hence delete above HAL, and add new HAL under hal.gr.hwpm_map
g->ops.gr.hwpm_map.align_regs_perf_pma() which returns correct
alignment if HAL is defined
Remove gr_gv100_add_ctxsw_reg_perf_pma() and
gr_gk20a_add_ctxsw_reg_perf_pma() APIs since they are no longer used
Simplify perf_pma parsing by fixing alignment with new HAL and then
directly calling add_ctxsw_buffer_map_entries()
Jira NVGPU-2895
Change-Id: I1852db846e1f5441e482028c79a3f39c5142b0c2
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2069471
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gr_gv100_get_active_fpba_mask(), we directly access top_* register
from hw_top_gv100.h h/w header to read FBPA count.
Add a new HAL in TOP unit to return max FBPA count
g->ops.top.get_max_fbpas_count()
Use this HAL in gr_gv100.c to get FBPA count and remove direct access
of top_* register, and also remove hw_top_gv100.h header include
Jira NVGPU-2895
Change-Id: Idfba553b24d7d6abf124a84b1490987e8cbf1985
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2069470
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, in nvgpu_aperture_mask_raw function, if NVGPU_MM_HONORS_APERTURE
flag is disabled, invalid or junk aperture input is changed to APERTURE_VIDMEM
instead of raising a warning.To resolve this bug, need to check if input
aperture is APERTURE_INVALID or undefined.
This patch adds APERTURE_MAX_ENUM to nvgpu_aperture structure which
gives upperbound of nvgpu_aperture types. This patch also adds condition in
nvgpu_aperture_mask_raw function to check for invalid or undefined aperture
input. For invalid inputs, function will BUG().
Jira NVGPU-2933
Change-Id: Ic9d260250e3083d693f025c6e32657f6a863aafb
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2034281
Reviewed-by: Philip Elcan <pelcan@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
