With Volta we have more number of broadcast registers than previous chips
and we don't decode them right now in gr_gk20a_decode_priv_addr()
Add a new GR HAL decode_priv_addr() and set gr_gk20a_decode_priv_addr() for all
previous chips
Add and use gr_gv11b_decode_priv_addr() for Volta
gr_gv11b_decode_priv_addr() will decode all the broadcast registers and set
the broadcast flags apporiately
Define below new broadcast types
PRI_BROADCAST_FLAGS_PMMGPC
PRI_BROADCAST_FLAGS_PMM_GPCS
PRI_BROADCAST_FLAGS_PMM_GPCGS_GPCTPCA
PRI_BROADCAST_FLAGS_PMM_GPCGS_GPCTPCB
PRI_BROADCAST_FLAGS_PMMFBP
PRI_BROADCAST_FLAGS_PMM_FBPS
PRI_BROADCAST_FLAGS_PMM_FBPGS_LTC
PRI_BROADCAST_FLAGS_PMM_FBPGS_ROP
Bug 200398811
Jira NVGPU-556
Change-Id: Ic673b357a75b6af3d24a4c16bb5b6bc15974d5b7
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1690026
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Dump timeout save0 and save1 even if they could
be unreliable when fecs_tgt in set in save0 . This
is good to have for debug purposes.
-Add priv_ring hal for decode_error_code
-Decode fecs error code for supported error types
Bug 1998067
Change-Id: I60cb6902d099df4a7df45fa624e44d9e0d46360f
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1683014
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Current code does not compute priv error register offsets
properly. This leads to invalid decoding of priv errors, and
can also trigger additional priv errors.
- add GPU_LIT_GPC_PRIV_STRIDE define
- return proj_gpc_priv_stride for GPU_LIT_GPC_PRIV_STRIDE in hals
- use GPU_LIT_GPC_PRIV_STRIDE instead of GPU_LIT_GPC_STRIDE in
g->ops.priv_ring.isr() to compute priv error register offsets.
Bug 2093058
Change-Id: Ia7c36ccba0441126784bb0e00452f2cf1196ef71
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1682118
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GV100 ucode is changed so that it expects LIST_nv_perf_pma_ctx_reg list in
ctxsw buffer to be 256 byte aligned but same change is not applied to other
chip ucodes
ADD new HAL (*add_ctxsw_reg_perf_pma) to configure PMA register list and
define a common HAL gr_gk20a_add_ctxsw_reg_perf_pma() for all other
chips except GV100
Define a separate HAL for GV100 gr_gv100_add_ctxsw_reg_perf_pma() and fix
the required alignment in this function
Bug 1998067
Change-Id: Ie172fe90e2cdbac2509f2ece953cd8552e66fc56
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1676655
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For LIST_nv_pm_fbpa_ctx_regs, we right now call
add_ctxsw_buffer_map_entries_subunits() to add registers corresponding
to all the FBPAs
But while configuring total number of registers, we do not consider
floorswept FBPAs and that causes misalignment in subsequent lists for GV100
Fix this by reading disabled/floorswept FBPAs from fuse and consider only those
FBPAs which are active for GV100
Add new HAL (*add_ctxsw_reg_pm_fbpa) to support this setting and define a
common HAL gr_gk20a_add_ctxsw_reg_pm_fbpa() for all chips except GV100
Define GV100 specific gr_gv100_add_ctxsw_reg_pm_fbpa() with above mentioned
implementation to consider floorsweeping
Bug 1998067
Change-Id: Id560551bb0b8142791c117b6d27864566c90b489
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1676654
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The value of NV_PERF_PMASYS_MEM_BUMP is different for Volta
and NVGPU_IOCTL_CHANNEL_CYCLE_STATS_SNAPSHOT_CMD_FLUSH did not
have correct behavior on GV11B due to that.
The patch adds an instance of css_hw_set_handled_snapshots
for Volta to fix that.
The patch also renames css_hw_set_handled_snapshots
to gk20a_css_hw_set_handled_snapshots to make it more clear
that the function is arch dependent.
Bug 1960846
Change-Id: I92c35a862ecd7f918dd1458c086fc7ae42ca8fc5
Signed-off-by: Martin Radev <mradev@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1662427
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add User space API NVGPU_AS_IOCTL_GET_SYNC_RO_MAP to get read-only syncpoint
address map in user space
We already map whole syncpoint shim to each address space with base address
being vm->syncpt_ro_map_gpu_va
This new API exposes this base GPU_VA address of syncpoint map, and unit size
of each syncpoint to user space.
User space can then calculate address of each syncpoint as
syncpoint_address = base_gpu_va + (syncpoint_id * syncpoint_unit_size)
Note that this syncpoint address is read_only, and should be only used for
inserting semaphore acquires.
Adding semaphore release with this address would result in MMU_FAULT
Define new HAL g->ops.fifo.get_sync_ro_map and set this for all GPUs supported
on Xavier SoC
Bug 200327559
Change-Id: Ica0db48fc28fdd0ff2a5eb09574dac843dc5e4fd
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1649365
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The message to tell RM server to unbind channel has to be sent after
client unbinds the channel and before client calls tsg release. The
channel has to belong to a tsg on RM server before client submit a
runlist to remove the channel. Or there's a bare channel problem.
By moving .tsg_unbind_channl one layer lower, gk20a_tsg_unbind_channel()
will be common functions for all chip, and it'll call tsg release after
call .tsg_unbind_channel. So vgpu won't need to worry about tsg was
released before sending msg to RM server.
Bug 200382695
Bug 200382785
Change-Id: I32acc122f3f9d5d0628049ccf673225f9e90c87a
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1645383
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Pascal has support for more comptags than Maxwell, but we were using
gm20b definitions for cbc_ctrl on all chips. Specifically field
clear_upper_bound is one bit wider in Pascal.
Implement gp10b version of cbc_ctrl and take that into use in Pascal
and Volta.
Bug 200381317
Change-Id: I7d3cb9e92498e08f8704f156e2afb34404ce587e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1642574
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add HAL for dumping ctxsw statistics. The statistics are dependent on
the architecture, and the function that calls this operation needs to
be moved to gk20a.
Bug 1842197
Change-Id: I285c74b8ddc8c7854c85b3fef4cbfc582098919e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1632681
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add an alignment check for compressible-kind fixed-address
mappings. If we're using page size smaller than the comptag line
coverage window, the GPU VA and the physical buffer offset must be
aligned in respect to that window.
Bug 1995897
Bug 2011640
Bug 2011668
Change-Id: If68043ee2828d54b9398d77553d10d35cc319236
Signed-off-by: Sami Kiminki <skiminki@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1606439
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For gv11b, configured gfx preemption wfi timeout in usec.
Set timeout unit as usec in gr_gv11b_init_preemption_state.
Used default timeout as 1msec and this timeout value can
be modified through sysfs node:
/sys/devices/gpu.0/gfxp_wfi_timeout_count
For gp10b:
gfxp_wfi_timeout_count is in syclk cycles
For gv11b:
gfxp_wfi_timeout_count is in usec
Bug 2003668
Change-Id: I68d52ce996a83df90b8b3a8164debb07e5cb370f
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1599658
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This CL is as part of phased changes to support NO LSPMU
Changes done are to add new pmu ops :
- setup_apertures
- update_lspmu_cmdline_args
These would be called from pmu op init_falcon_setup_hw
JIRA NVGPU-296
Change-Id: Idbcec5c93ca3150df5c9fb81d65b9fce778cecb8
Signed-off-by: Supriya <ssharatkumar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1589004
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-New fuse ops is added to set NVGPU_SEC_PRIVSECURITY
and NVGPU_SEC_SECUREGPCCS bits in g->enabled_flags
during hal initialization
-For igpu non simulation platforms, fuses are read
to decide if gpu should be allowed to boot or not.
--Do not boot gpu if priv_sec_en is set but wpr_enabled
is not set to 1 or vpr_auto_fetch_disable is not set to 0
--With priv_sec_en set, all falcons have to boot
in LS mode and this needs wpr_enabled set to 1
AND vpr_auto_fetch_disable set to 0. In this case
gmmu tries to pull wpr and vpr settings from tegra mc
Bug 2018223
Change-Id: Iceaa1b0b3214e9a3d6cef5d77a82e034302f748b
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1595454
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
TSG/CHANNEL_SET_PRIORITY IOCTLs are deprecated and user space should be using
combination of timeslice and interleave levels to decide the priority
Hence remove the IOCTLs and all corresponding APIs
Jira NVGPU-393
Change-Id: I7cf0785689269536eca0c278c774b0e9e74f8c2f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1598581
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Since NVGPU_AS_MAP_BUFFER_FLAGS_DIRECT_KIND_CTRL was made mandatory,
kernel does not need to know the details about the PTE kinds
anymore. Thus, we can remove the kind_gk20a.h header and the code
related to kind table setup, as well as simplify buffer mapping code
a bit.
Bug 1902982
Change-Id: Iaf798023c219a64fb0a84da09431c5ce4bc046eb
Signed-off-by: Sami Kiminki <skiminki@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1560933
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move fuse override DT handling to Linux code. All the chip specific
fuse override functions did the same thing, so delete the HAL and
call the same function to read the DT overrides on all chips.
Also remove the fuse override functionality from dGPU. There are no
DT entries for PCIe devices, so it would've failed anyway.
JIRA NVGPU-259
Change-Id: Iba64a5d53bf4eb94198c0408a462620efc2ddde4
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1593687
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Split the ctxsw trace "core" API code into <nvgpu/ctxsw_trace.h>. This
is not perect though since there's some Linuxisms present in the HAL
and as such that code has to be hidden by the ctxsw tracing CONFIG. But
this patch should work for QNX such that it will allow the code to
build as long as CONFIG_GK20A_CTXSW_TRACE is not set.
Also fix the copywrite notice in the ctxsw code present under
common/linux to be GPL.
JIRA NVGPU-287
Change-Id: I94715864caf335b7220185492e4629d713b025e0
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1589429
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Migrate ctxsw_trace_gk20a.c to common/linux/ctxsw_trace.c. This
has been done becasue the ctxsw tracing code is currently too
tightly tied to the Linux OS due to usage of a couple system calls:
- poll()
- mmap()
And general Linux driver framework code. As a result pulling the
logic out of the FECS tracing code is simply too large a scope for
time time being.
Instead the code was just copied as much as possible. The HAL ops
for the FECS code was hidden behind the FECS tracing config so
that the vm_area_struct is not used when QNX does not define said
config. All other non-HAL functions called by the FECS ctxsw
tracing code ha now also been hidden by this config. This is not
pretty but for the time being it seems like the way to go.
JIRA NVGPU-287
Change-Id: Ib880ab237f4abd330dc66998692c86c4507149c2
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1586547
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add max_css_buffer_size to gpu characteristics. In the virtual
case, the size of the cycle stats snapshot buffer is constrained
by the size of the mempool shared between the guest OS and the
RM server, so tools need to find out what is the maximum size
allowed.
In the native case, we return 0xffffffff to indicate
that the buffer size is unbounded (subject to memory availability),
in the virtual case we return the size of the mempool.
Also collapse native init_cyclestats functions to a single version,
as each chip had identical versions of the code.
JIRA ESRM-54
Bug 200296210
Change-Id: I71764d32c6e71a0d101bd40f274eaa4bea3e5b11
Signed-off-by: Peter Daifuku <pdaifuku@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1578930
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We right now initialize czf_bypass value in gr_gp10b_init_preemption_state()
which is run at every rail ungate
And that results in any user specified value through sysfs getting lost after
railgate
To fix this, move initialization of czf_bypass to gk20a_init_gr_setup_sw() so
that it gets initialized only once
Add new HAL g->ops.gr.init_czf_bypass to initialize same and define it for
gp10b/gp106/vgpu-gp10b
Bug 2008262
Change-Id: I80a38ef527c86e32c6d64d0626b867239db9ea51
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1585224
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move much of the remaining generic MM code to a new common location:
common/mm/mm.c. Also add a corresponding <nvgpu/mm.h> header. This
mostly consists of init and cleanup code to handle the common MM
data structures like the VIDMEM code, address spaces for various
engines, etc.
A few more indepth changes were made as well.
1. alloc_inst_block() has been added to the MM HAL. This used to be
defined directly in the gk20a code but it used a register. As a
result, if this register hypothetically changes in the future,
it would need to become a HAL anyway. This path preempts that
and for now just defines all HALs to use the gk20a version.
2. Rename as much as possible: global functions are, for the most
part, prepended with nvgpu (there are a few exceptions which I
have yet to decide what to do with). Functions that are static
are renamed to be as consistent with their functionality as
possible since in some cases function effect and function name
have diverged.
JIRA NVGPU-30
Change-Id: Ic948f1ecc2f7976eba4bb7169a44b7226bb7c0b5
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1574499
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Created "mem_unlock" HAL under fb to support memory
unlock
- Called as part of gk20a_finalize_poweron() if memory unlock
support needed by checking HAL
- Assigned "mem_unlock" HAL to NULL for chips which don't
need memory unlocks.
Change-Id: I68d0910f15d293feaacfcbf6bd17ecccd3b5219d
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
(cherry picked from commit 586894eb84860bbbe4c75dae4715bdf27432a480)
Reviewed-on: https://git-master.nvidia.com/r/1564703
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Refactor the last nvgpu_vm functions from the mm_gk20a.c code. This
removes some usages of dma_buf from the mm_gk20a.c code, too, which
helps make mm_gk20a.c less Linux specific.
Also delete some header files that are no longer necessary in
gk20a/mm_gk20a.c which are Linux specific. The mm_gk20a.c code is now
quite close to being Linux free.
JIRA NVGPU-30
JIRA NVGPU-138
Change-Id: I72b370bd85a7b029768b0fb4827d6abba42007c3
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1566629
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
