Move code used only with graphics under
CONFIG_NVGPU_GRAPHICS check.
gm20b_gr_init_load_sw_bundle_init hal get called
without CONFIG_NVGPU_GR_GOLDEN_CTX_VERIFICATION check.
Remove dead code in
nvgpu_gr_ctx_check_valid_preemption_mode function.
Jira NVGPU-3968
Change-Id: I399126123006ae44dba29b3c08378d11fe82e543
Signed-off-by: vinodg <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2247346
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Previously, unit interrupt enabling/disabling and corresponding MC level
interrupt enabling/disabling was not done at the same time.
With this change, stall and nonstall interrupt for units are programmed
at MC level along with individual unit interrupts. Kept access to MC
interrupt registers through mc.intr_lock spinlock.
For doing this separated CE and GR interrupt mask functions.
mc.intr_enable is only used when there is global interrupt
control to be set. Removed mc_gp10b.c as mc_gp10b_intr_enable
is now removed. Removed following functions - mc_gv100_intr_enable,
mc_gv11b_intr_enable & intr_tu104_enable. Removed intr_pmu_unit_config
as we can use the generic unit interrupt control function.
JIRA NVGPU-4336
Change-Id: Ibd296d4a60fda6ba930f18f518ee56ab3f9dacad
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196178
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
To enable ecc interrupts early during nvgpu_finalize_poweron, ecc
support has to be enabled early. ecc support was being initialized
together for GR, LTC, PMU, FB units late in the poweron sequence.
Move the ecc init for each unit to respective unit's init functions.
And separate out the hal ecc functions from GR ecc unit to
respective hal units.
JIRA NVGPU-4336
Change-Id: I2c42fb6ba3192dece00be61411c64a56ce16740a
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2239153
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
FMON/Clock Mon detects for fault in a particular clock domain.
For this we need to poll a specified master register to know if there
is any fault. If this is set we scan all the available clock domains
to see which domain is faulted and the type of fault.
This CL will have all required common functions to monitor
different clock domains registers.
Bug 2182063
NVGPU-3846
Change-Id: I6a2bdb65335eaeef995eb163d480ee722c230311
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2170887
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The devinit executes in parallel with PCIE link training
to reduce exit latency. Therefore, all PCIE settings that
normally occur during devinit after the PCIE link is up are
deferred until nvgpu has resumed control.
Bug 2661545
Change-Id: Ifdd4f645b2e1791d93567cc34d6ab0691a25d101
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2210625
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move graphics related defs and functions under CONFIG_NVGPU_GRAPHICS
switch.
Move classes not supported in GV11B under CONFIG_NVGPU_NON_FUSA
switch.
Add missing valid class numbers to gpu_class.is_valid HAL.
Also remove un-used class defs from class.h header.
Lot of qnx safety tests are still using graphics 3d class.
Until those tests got fixed, allowing 3d graphics class
as valid class for safety build.
JIRA NVGPU-4301
Change-Id: Ifd2a13bee3210821799c2bca10e7245eb3c79121
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2224658
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This function gets the GPU chip architecture, implementation and
revision information by reading the MC boot register, hence it
is more suited to be located in HAL files.
test_check_gpu_state is now being run after test_hal_init as the
gops.mc needs to be initialized for test_check_gpu_state subtest.
JIRA NVGPU-2524
Change-Id: I85355af11d3505a9eb4f10a3fe4e6d9b56285047
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226018
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
gk20a.h will include gops_mc.h to contain the mc ops definitions. Add
doxygen comments for the HAL functions that are called directly.
Also move mc_gp10b_intr_pmu_unit_config to non-fusa HAL file.
JIRA NVGPU-2524
Change-Id: I4f326332d7842211b004b372d79fac9fe6ed40e7
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2226017
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved mmu replayable fault related code under CONFIG_NVGPU_REPLAYABLE_FAULT
switch, so that it will be compiled out for safety build.
Following hals and their related code also moved under
CONFIG_NVGPU_REPLAYABLE_FAULT switch:
void (*handle_replayable_fault)(struct gk20a *g);
int (*mmu_invalidate_replay)(struct gk20a *g, u32 invalidate_replay_val);
JIRA NVGPU-4302
Change-Id: I191ee0c181b276a04bc1531488862380af81a5c9
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2227176
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently nvgpu reads the temperature by reading the
NV_THERM_I2CS_SENSOR_00 register. Below are the issues
with current approach
1) NV_THERM_I2CS_SENSOR_00 doesn't support
fractional precision which is POR.
2) It doesn't support negative temperatures which
is required for Auto.
3) It doesn't take into account the right POR
sensor in VFE VBIOS tables.
From therm channel get status interface we can read the
current temperature from PMU.
NVBUG - 200549047
Change-Id: I2fb21926208876f3d3bebe3f2dee08edafedbc7d
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2196224
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add doxygen support to following functions.
- gr_prepare_sw
- gr_enable_hw
- gr_init_support
- gr_suspend
In ecc subunit
- ecc_init_support
- ecc_remove_support
- detect
In setup subunit
- alloc_obj_ctx
- free_gr_ctx
- free_subctx
- set_preemption_mode
In falcon subunit
- read_fecs_ctxsw_mailbox
- dump_stats
- get_fecs_ctx_state_store_major_rev_id
- bind_instblk
- ctrl_ctxsw
In intr subunit
- nonstall_isr
- stall_isr
- flush_channel_tlb
In init subunit
- get_no_of_sm
- get_nonpes_aware_tpc
- wait_initialized
- fifo_access
- get_max_subctx_count
- detect_sm_arch
- get_supported__preemption_modes
- get_default_preemption_modes
Identified the hal ops not being called from outside
units. Placed those hals under @cond ... @endcond comments.
Each gr subunit structure definition is taken outside the
main gops_gr structure definition. This helps to give a
well structured doxygen document.
Removed unused gr.falcon hals for
submit_fecs_method_op
submit_fecs_sideband_method_op
Update doxygen comments for nvgpu_gr_enable_hw and
nvgpu_gr_intr_stall_isr functions.
Jira NVGPU-4107
Change-Id: I56a74ef07bcc21752a06e3a4f55442894bb9109f
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2214511
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add checking for unused non safety code in the
gr interrupt unit.
Add #ifdef CONFIG_NVGPU_HAL_NON_FUSA checking for
gm20b_gr_intr_tpc_exception_sm_enable function which is not being
called in safety code.
Add #ifdef CONFIG_NVGPU_DEBUGGER checking for
gm20b_gr_intr_tpc_exception_sm_disable function which is needed
with debugger enable.
Jira NVGPU-4085
Change-Id: Ie721505cdfced5b6b0443624d6e7cca2a0d4a19a
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2208918
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently after sending change seq RPC, nvgpu waits for a fixed time
of 20ms.
This CL replaces this with pmu_wait_message_cond, which will return
immediately after getting change seq completion event.
Also added debug fs node to get the change seq execution time.
Bug 200545366
Change-Id: Iba283f65d4949858be9cbff88de4d21a8c92ff81
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2202423
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GR tick frequency needs to be set to MAX value for profiler
use cases for gp10b/gv11b/tu104 chips.
Add new HAL g->ops.ptimer.config_gr_tick_freq() that configures GR
tick frequency to MAX value and call this HAL in GPU poweron path.
This support is not needed in safety build, so compile everything
only if CONFIG_NVGPU_DEBUGGER is enabled
Bug 200289214
Change-Id: Id8378540cc67ca0041b56990f8676e3a105403a5
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2195163
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
g->ops.gr.init.get_access_map() returns whitelist of register addresses
that can be accessed by SET_FALCON methods when added into pushbuffer.
SET_FALCON method does not need to be supported in safety.
Hence install an empty register access map in safety build by adding
a new flag CONFIG_NVGPU_SET_FALCON_ACCESS_MAP.
Compile out g->ops.gr.init.get_access_map() and code that writes
whitelist in access map buffer.
Note that we still need to configure base address of access map in
context image even for safety.
Jira NVGPU-3995
Bug 2686235
Change-Id: I111b46f96821a09929aff32fcba5bb2215c81b9a
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2185469
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Change the directly called init functions to function pointers in the
HAL. This makes it more consistent. This also allows for writing more
comprehensive unit tests for nvgpu.common.init.
JIRA NVGPU-2239
Change-Id: I05d739a8f8a2e7d385322d93154206eb0bfddc10
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2173920
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added following gr init related gv11b hal for safety golden context
creation:
void gv11b_gr_init_restore_stats_counter_bundle_data(struct gk20a *g,
struct netlist_av_list *sw_bundle_init);
int gv11b_gr_init_load_sw_bundle_init(struct gk20a *g,
struct netlist_av_list *sw_bundle_init);
gv11b_gr_init_restore_stats_counter_bundle_data implements functionality
required to re-store stats bundle data, to avoid fe and mme mismatch.
gv11b_gr_init_load_sw_bundle_init implements functionality required for
disable stats idle clock counter to avoid mismatches
with two golden context saves.
JIRA NVGPU-3558
Change-Id: I73886770dac30934cbd3989b19ba87553286453d
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2167211
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add CONFIG_NVGPU_RECOVERY in order to conditionally compile
recovery code. This code will be removed from safety build
when sw quiesce state is implemented, and negative tests are
disabled or modified such that they do not expect recovery
to happen.
Added static inline functions for recovery handlers, when
CONFIG_NVGPU_RECOVERY is not defined. These inline functions
can later be wired to the sw quiesce functions.
Also moved gv11b recovery code to non-fusa, as it will ultimately
be removed from safety build.
Jira NVGPU-3871
Change-Id: Ia705b059fab6120899c7e15082f2a0f51ff51dc9
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2166074
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved non-secure gr falcon boot related code to non-functional safety file.
Also added HAL initialization related to these functions under
CONFIG_NVGPU_GR_FALCON_NON_SECURE_BOOT flag.
JIRA NVGPU-3741
Change-Id: I72fb92c04dc6e76c338e9a0e0cd86b12109ce284
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2158936
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Compile-out non-secure gr falcon boot related code for safety build by
adding non-secure gr falcon related code under following flag:
CONFIG_NVGPU_GR_FALCON_NON_SECURE_BOOT
Added nvgpu_gr_falcon_load_ctxsw_ucode and related functions under
CONFIG_NVGPU_GR_FALCON_NON_SECURE_BOOT flag and enabled this flag only
for non-safety builds.
JIRA NVGPU-3741
Change-Id: I817d8a7be6a675eee514faf7bb93f1382c6da5ce
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2158935
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The following DEVCTLs not needed in safety build
Compiled out below DEVCTLs for safety build
* NVGPU_GPU_DEVCTL_SET_THERM_ALERT_LIMIT
* NVGPU_GPU_DEVCTL_GET_TPC_EXCEPTION_EN_STATUS
* NVGPU_GPU_DEVCTL_GET_CPU_TIME_CORRELATION_INFO
Also added config flag CONFIG_NVGPU_IOCTL_NON_FUSA
JIRA NVGPU-3768
Change-Id: Ia233d0aac8201268524581f588d97390a913ab9c
Signed-off-by: Sagar Kadamati <skadamati@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2159398
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Initialize the clock counters for GPCCLK, XBARCLK, SYSCLK.
This INIT was done in PMU before, but now disabled from TU10A profile.
Hence the initialization is moved into nvgpu.
This patch does the following.
1. Move clock files from GV100 to TU104.
2. Add the Counter HW Registers.
3. Initialize the counter registers for gpc, xbar and sysclk.
4. Change the debug fs node from gv100 to tu104.
5. Update in yaml file with new file names.
Bug 200536091
Change-Id: I436019a18f5c4c73979977666d0c04ce4c569047
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2155298
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Mahantesh Kumbar <mkumbar@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
There was a name clash between the nvgpu_set_error_notifier*() APIs and
the SET_ERROR_NOTIFIER IOCTL. Therefore, the APIs were renamed from
nvgpu_set_error_notifier*() to nvgpu_set_err_notifier*(). This rename
was done to fix MISRA 5.x errors.
JIRA NVGPU-1633
Change-Id: I06af551a664b0706f106e853f1ea8733894f11bd
Signed-off-by: Adeel Raza <araza@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2159813
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Following common and corresponding hal functions are non-safe. They are
either required for intr handling or for debug. Compile them out for
igpu safety release. Moved corresponding HALs to falcon_gk20a.c.
nvgpu_falcon_copy_from_emem
nvgpu_falcon_copy_to_emem
nvgpu_falcon_clear_halt_intr_status
nvgpu_falcon_set_irq
nvgpu_falcon_copy_from_dmem
nvgpu_falcon_copy_from_imem
nvgpu_falcon_print_dmem
nvgpu_falcon_print_imem
nvgpu_falcon_get_ctls
nvgpu_falcon_dump_stats can be used in the safety debug build.
JIRA NVGPU-898
JIRA NVGPU-2214
Change-Id: Icb7f904b088aa74b976f75a6a0ecdb783486bab3
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2152978
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add BLCG and SLCG clock gating support for HSHUB unit on gv11b and tu104
Register list for BLCG and SLCG is auto generated with scripts.
Add HAL operations to enable/disable HSHUB clock gating
Re-generate gv11b reglist so that all the manually commented registers
are automatically deleted. Some of the unicast registers are also
deleted. We already have corresponding broadcast registers present.
Bug 2526212
Change-Id: I2654f158daa802bcf992e103ed4a44675aa5fd4d
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2150199
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
