membar.sys does synchronization with the whole system (GPU and CPU),
membar.gl does synchronization within the GPU.
In gv11b, fb flush is generating membar.gl instead of membar.sys, which
is an issue. To fix this issue. following WAR is used:
1. Use bar1 engine id and bind it to a particular pdb,
2. Then instead of a fb_flush, issue a tlb invalidate of the bar1 pdb.
Now allocation of vm for bar1 instance block and bar1 binding is done
without check for bar1 support. Only bar1 register mapping is done
based on bar1 support enabled.
Bug 2112790
Change-Id: I76f43f1178a68f10823d48bc9da55d2bd686dd52
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1750257
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add remove_gr_sys() op to gpu_ops to reverse steps
done in create_gr_sysfs().
Make gv11b_tegra_remove() specific to gv11b instead
to properly remove sysfs nodes. This also helps in
having gv11b specific remove steps.
Also, update platform remove function of dGPU i.e.
nvgpu_pci_tegra_remove() to remove sysfs nodes. This
adds parity with iGPU platform remove.
Bug 1987855
Change-Id: Ibbaffac5c24346709347f86444a951461894354d
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1735987
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- defined platform agnostic wrapper for mempool
mapping and unmapping.
- used platform agnositc wrapper for device
tree parsing.
- modified css_gr_gk20a to include special
handling incase of rm-server
JIRA: VQRM:3699
Change-Id: I08fd26052edfa1edf45a67be57f7d27c38ad106a
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1733576
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below HALs to setup mmu_fault configuration registers and to read
information registers and set them on Volta
gops.fb.write_mmu_fault_buffer_lo_hi()
gops.fb.write_mmu_fault_buffer_get()
gops.fb.write_mmu_fault_buffer_size()
gops.fb.write_mmu_fault_status()
gops.fb.read_mmu_fault_buffer_get()
gops.fb.read_mmu_fault_buffer_put()
gops.fb.read_mmu_fault_buffer_size()
gops.fb.read_mmu_fault_addr_lo_hi()
gops.fb.read_mmu_fault_inst_lo_hi()
gops.fb.read_mmu_fault_info()
gops.fb.read_mmu_fault_status()
Jira NVGPUT-13
Change-Id: Ia99568ff905ada3c035efb4565613576012f5bef
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1744063
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below new HALs to allocate/map/commit global context buffers
gops.gr.alloc_global_ctx_buffers()
gops.gr.map_global_ctx_buffers()
gops.gr.commit_global_ctx_buffers()
Set these HALs for all the supported GPUs
We right now re-use below APIs to set these HALs
gr_gk20a_alloc_global_ctx_buffers()
gr_gk20a_map_global_ctx_buffers()
gr_gk20a_commit_global_ctx_buffers()
Jira NVGPUT-27
Change-Id: I975a54e8d1716af057f982d543787748d35a256e
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1743362
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
As part of the MISRA fixes, moving all the
gating_reglist files to common/clock_gating dir,
the new directory structure suggested to follow.
Removed unused gating_reglist files for gk20a
JIRA NVGPU-646
Change-Id: I388855befcf991ee68eeffed10fe9ac456210649
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1722330
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Semaphore methods currently being used in Volta are deprecated for future chips
And on Volta we support both old and new methods
So replace old methods by new methods on Volta itself so that new methods
get tested on silicon
Implement below HALs for Volta with new semaphore methods
gops.fifo.add_sema_cmd() to insert HOST semaphore acquire/release methods
gops.fifo.get_sema_wait_cmd_size() to get size of acquire command buffer
gops.fifo.get_sema_incr_cmd_size() to get size of release command buffer
Also use new methods in these APIs
gv11b_fifo_add_syncpt_wait_cmd()
gv11b_fifo_add_syncpt_incr_cmd()
And change corresponding APIs to reflect correct size of command buffer
gv11b_fifo_get_syncpt_wait_cmd_size()
gv11b_fifo_get_syncpt_incr_cmd_size()
Jira NVGPUT-16
Change-Id: Ia3a37cd0560ddb54761dfea9bd28c4384cd8a11c
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1704518
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below new HALs
gops.fifo.add_sema_cmd() to insert HOST semaphore acquire/release methods
gops.fifo.get_sema_wait_cmd_size() to get size of acquire command buffer
gops.fifo.get_sema_incr_cmd_size() to get size of release command buffer
Separate out new API gk20a_fifo_add_sema_cmd() to implement semaphore acquire/
release sequence and set it to gops.fifo.add_sema_cmd()
Add gk20a_fifo_get_sema_wait_cmd_size() and gk20a_fifo_get_sema_incr_cmd_size()
to return respective command buffer sizes
Jira NVGPUT-16
Change-Id: Ia81a50921a6a56ebc237f2f90b137268aaa2d749
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1704490
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
NVGPU_DBG_GPU_IOCTL_PC_SAMPLING ioctl is not handled properly for HV
case for both Linux and QNX. Currently guest vm is trying to perform
gpu memory read and write operations which supposed to be done by RM
server, causing the crash. This patch is supposed to fix ioctl failure.
Bug 2052040
Change-Id: Ia0773959b84739a1bced858331764751520a3561
Signed-off-by: Prateek Sethi <prsethi@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1708102
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Sourab Gupta <sourabg@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Sourab Gupta <sourabg@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Switch all logging to nvgpu_log*(). gk20a_dbg* macros are
intentionally left there because of use from other repositories.
Because the new functions do not work without a pointer to struct
gk20a, and piping it just for logging is excessive, some log messages
are deleted.
Change-Id: I00e22e75fe4596a330bb0282ab4774b3639ee31e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1704148
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new HAL gops.mc.isr_nonstall() to handle nonstall interrupts
We already handle nonstall interrupts in nvgpu_intr_nonstall()
But this API is completely in linux specific code
Separate out os-independent code to handle nonstall interrupts in new API
mc_gk20a_isr_nonstall() and set it to HAL gops.mc.isr_nonstall() for all
existing chips
Call this HAL from nvgpu_intr_nonstall()
Jira NVGPUT-8
Change-Id: Iec6a56db03158a72a256f7eee8989a0a8a42ae2f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1706589
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below two new HALs
gops.fifo.runlist_hw_submit() to submit a new runlist to hardware
gops.fifo.runlist_wait_pending() to wait until runlist write is successful
Set existing API gk20a_fifo_runlist_wait_pending() to
gops.fifo.runlist_wait_pending HAL
Add new API gk20a_fifo_runlist_hw_submit() which submits the runlist to h/w
and set it to gops.fifo.runlist_hw_submit HAL
Jira NVGPUT-20
Change-Id: Ic23f7d947e30883aca0b536de818e79e14733195
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1700548
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gr_gv11b/gk20a_create_priv_addr_table() we do not consider floorswept FBPAs
and just calculate the unicast list assuming all FBPAs are present
This generates incorrect list of unicast addresses
Fix this introducing new HAL ops.gr.split_fbpa_broadcast_addr
Set gr_gv100_get_active_fpba_mask() for GV100
Set gr_gk20a_split_fbpa_broadcast_addr() for rest of the chips
gr_gv100_get_active_fpba_mask() will first get active FPBA mask and generate
unicast list only for active FBPAs
Bug 200398811
Jira NVGPU-556
Change-Id: Idd11d6e7ad7b6836525fe41509aeccf52038321f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1694444
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We currently use hard coded values of NV_PERF_PMMGPC_CHIPLET_OFFSET and
NV_PMM_FBP_STRIDE which are incorrect for Volta
Add new GR HAL get_pmm_per_chiplet_offset() to get correct value per-chip
Set gr_gm20b_get_pmm_per_chiplet_offset() for older chips
Set gr_gv11b_get_pmm_per_chiplet_offset() for Volta
Use HAL instead of hard coded values wherever required
Bug 200398811
Jira NVGPU-556
Change-Id: I947e7febd4f84fae740a1bc74f99d72e1df523aa
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1690028
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We have new broadcast registers on Volta, and we need to generate correct
unicast addresses for them so that we can write those registers to context image
Add new GR HAL create_priv_addr_table() to do this conversion
Set gr_gk20a_create_priv_addr_table() for older chips
Set gr_gv11b_create_priv_addr_table() for Volta
gr_gv11b_create_priv_addr_table() will use the broadcast flags and then generate
appriate list of unicast register for each broadcast register
Bug 200398811
Jira NVGPU-556
Change-Id: Id53a9e56106d200fe560ffc93394cc0e976f455f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1690027
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
With Volta we have more number of broadcast registers than previous chips
and we don't decode them right now in gr_gk20a_decode_priv_addr()
Add a new GR HAL decode_priv_addr() and set gr_gk20a_decode_priv_addr() for all
previous chips
Add and use gr_gv11b_decode_priv_addr() for Volta
gr_gv11b_decode_priv_addr() will decode all the broadcast registers and set
the broadcast flags apporiately
Define below new broadcast types
PRI_BROADCAST_FLAGS_PMMGPC
PRI_BROADCAST_FLAGS_PMM_GPCS
PRI_BROADCAST_FLAGS_PMM_GPCGS_GPCTPCA
PRI_BROADCAST_FLAGS_PMM_GPCGS_GPCTPCB
PRI_BROADCAST_FLAGS_PMMFBP
PRI_BROADCAST_FLAGS_PMM_FBPS
PRI_BROADCAST_FLAGS_PMM_FBPGS_LTC
PRI_BROADCAST_FLAGS_PMM_FBPGS_ROP
Bug 200398811
Jira NVGPU-556
Change-Id: Ic673b357a75b6af3d24a4c16bb5b6bc15974d5b7
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1690026
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GV100 ucode is changed so that it expects LIST_nv_perf_pma_ctx_reg list in
ctxsw buffer to be 256 byte aligned but same change is not applied to other
chip ucodes
ADD new HAL (*add_ctxsw_reg_perf_pma) to configure PMA register list and
define a common HAL gr_gk20a_add_ctxsw_reg_perf_pma() for all other
chips except GV100
Define a separate HAL for GV100 gr_gv100_add_ctxsw_reg_perf_pma() and fix
the required alignment in this function
Bug 1998067
Change-Id: Ie172fe90e2cdbac2509f2ece953cd8552e66fc56
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1676655
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For LIST_nv_pm_fbpa_ctx_regs, we right now call
add_ctxsw_buffer_map_entries_subunits() to add registers corresponding
to all the FBPAs
But while configuring total number of registers, we do not consider
floorswept FBPAs and that causes misalignment in subsequent lists for GV100
Fix this by reading disabled/floorswept FBPAs from fuse and consider only those
FBPAs which are active for GV100
Add new HAL (*add_ctxsw_reg_pm_fbpa) to support this setting and define a
common HAL gr_gk20a_add_ctxsw_reg_pm_fbpa() for all chips except GV100
Define GV100 specific gr_gv100_add_ctxsw_reg_pm_fbpa() with above mentioned
implementation to consider floorsweeping
Bug 1998067
Change-Id: Id560551bb0b8142791c117b6d27864566c90b489
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1676654
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
