clk_arb.h and gk20a.h has circular dependencies to each other. This is
removed by forward declaring struct gk20a in clk_arb.h and removing the
header gk20a.h from clk_arb.h and similarly forward declaring struct
nvgpu_clk_arb in gk20a.h and removing the header clk_arb.h from gk20a.h
alongwith putting headers in every execution unit which calls clk_arb.h
related methods.
JIRA NVGPU-597
Change-Id: I7cedca17206c148b21d93e5d7f0d88c2f98b979a
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1790915
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
once gpu is powered off i.e. power_on set to false, nvgpu isr
does not handle stall/nonstall irq. Depending upon state
of gpu, this can result in either of following errors:
1) irq 458: nobody cared (try booting with the "irqpoll" option)
2) "HSM ERROR 42, GPU" from SCE if it detects that an interrupt is
not in time.
Fix these by masking all interrupts just before gpu power off
as nvgpu won't be handling any irq anymore.
While masking interrupts, if there are any pending interrupts,
then report those with a log message.
Bug 1987855
Bug 200424832
Change-Id: I95b087f5c24d439e5da26c6e4fff74d8a525f291
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1770802
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- create common file common/ecc.c which include common functions for add
ecc counters and remove counters.
- common code will create a list of all counter which make it easier to
iterate all counters.
- Add chip specific file for adding ecc counters.
- add linux specific file os/linux/ecc_sysfs.c to export counters to
sysfs.
- remove obsolete code
- MISRA violation for using snprintf is not solved, tracking with
jira NVGPU-859
Jira NVGPUT-115
Change-Id: I1905c43c5c9b2b131199807533dee8e63ddc12f4
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1763536
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved gv11b_detect_ecc_enabled_units function
from gv11b.c to gr_gv11b.c, as this is being
used only in gr_gv11b file.
In order to avoid GR code touching fuse registers,
as it need to include fuse HW headers in GR code,
introduced two fuse HALs which are being called
from GR code. is_opt_ecc_enable for checking
whether ecc enable bit is set in fuse register
and is_opt_feature_overide_disable for checking
whether feature override disable bit is set in
fuse register.
Initialized fuse HAL functions for chips that
make use of those HAL functions.
JIRA NVGPU-615
Change-Id: Iafe5a3940bb19cb3da51e270403450b63c2f67a3
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1775564
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move queries of FB MMU configuration to FB HAL. Also use g->ltc_count
instead of reading the number of LTCs from FB. These changes together
remove last direct uses of FB registers from GR.
JIRA NVGPU-714
Change-Id: I1b4b46fc2f636f5c1904e4174040a47a27948999
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1773076
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Added prefix gp106_ to sec2_wait_for_halt()
& sec2_clear_halt_interrupt_status() for gp106
SEC2 HAL
- Made changes to gp106_sec2_wait_for_halt() to
read SEC2 falcon mailbox using common falcon
mailbox access functions.
- Add define for falcon mailbox
- These changes are done to reuse gp106 HAL's
for GPU_NEXT.
Change-Id: Id32a7636d775b482684212ed4ef5d01c8ea65335
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1755618
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gr_gk20a_find_priv_offset_in_buffer() we right now calculate
offset of a register in gpccs segment based on register address type
Separate out sequence to find offset in gpccs segment and move it to new API
gr_gk20a_get_offset_in_gpccs_segment()
Introduce new HAL gops.gr.get_offset_in_gpccs_segment() and set above API
to this HAL
Call HAL from gr_gk20a_find_priv_offset_in_buffer() instead of calling direct
API
Jira NVGPUT-118
Change-Id: I0df798456cf63e3c3a43131f3c4ca7990b89ede0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1761669
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add remove_gr_sys() op to gpu_ops to reverse steps
done in create_gr_sysfs().
Make gv11b_tegra_remove() specific to gv11b instead
to properly remove sysfs nodes. This also helps in
having gv11b specific remove steps.
Also, update platform remove function of dGPU i.e.
nvgpu_pci_tegra_remove() to remove sysfs nodes. This
adds parity with iGPU platform remove.
Bug 1987855
Change-Id: Ibbaffac5c24346709347f86444a951461894354d
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1735987
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- removed inclusion of linux includes.
- replaced with nvgpu/*.h's
- reformated the function signature of
"css_hw_get_pending_snapshot" and
"css_hw_get_overflow_status" be global instead of
static.
- added get_pending_snapshot and get_overflow_status
to ops->css.
JIRA: VQRM-3699
Change-Id: I177904c263e143b414924c2c28ad6fd3cfd00132
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1732783
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- On t186, ucode expects physical address to be
programmed for FECS trace buffer.
- On t194, ucode expects GPU VA to be programmed
for FECS trace buffer. This patch adds extra
support to handle this change for linux native.
- Increase the size of FECS trace buffer (as few
entries were getting dropped due to overflow of
FECS trace buffer.)
- This moves FECS trace buffer handling in global
context buffer.
- This adds extra check for updation of mailbox1
register. (Bug 200417403)
EVLR-2077
Change-Id: I7c3324ce9341976a1375e0afe6c53c424a053723
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1536028
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Nirav Patel <nipatel@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below new HALs to allocate/map/commit global context buffers
gops.gr.alloc_global_ctx_buffers()
gops.gr.map_global_ctx_buffers()
gops.gr.commit_global_ctx_buffers()
Set these HALs for all the supported GPUs
We right now re-use below APIs to set these HALs
gr_gk20a_alloc_global_ctx_buffers()
gr_gk20a_map_global_ctx_buffers()
gr_gk20a_commit_global_ctx_buffers()
Jira NVGPUT-27
Change-Id: I975a54e8d1716af057f982d543787748d35a256e
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1743362
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The WPR will be divided into several sub-WPRs,
one for each Falcon and one common for sharing
between Falcons which bootstrap falcons
- Defined & used flag NVGPU_SUPPORT_MULTIPLE_WPR
to know M-WPR support.
- Added struct lsfm_sub_wpr to hold subWPR header info
- Added struct lsf_shared_sub_wpr_header to hold subWPR
info & copied to WPR blob after LSF_WPR_HEADER
- Set NVGPU_SUPPORT_MULTIPLE_WPR to false for gp106,
gv100 & gv11b.
- Added methods to support to multiple WPR support &
called by checking flag NVGPU_SUPPORT_MULTIPLE_WPR
in ucode blob preparation flow.
JIRA NVGPUTU10X / NVGPUT-99
Change-Id: I81d0490158390e79b6841374158805f7a84ee6cb
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1725369
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
As part of the MISRA fixes, moving all the
gating_reglist files to common/clock_gating dir,
the new directory structure suggested to follow.
Removed unused gating_reglist files for gk20a
JIRA NVGPU-646
Change-Id: I388855befcf991ee68eeffed10fe9ac456210649
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1722330
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below new HALs for bios operations
gops.bios.devinit()
gops.bios.preos()
gops.bios.verify_devinit()
Export existing APIs gp106_bios_devinit() and gp106_bios_preos() and set them
to above HALs on gp106 and gv100
And call new HALs from gp106_bios_init() if supported instead of directly
calling APIs
Jira NVGPUT-48
Change-Id: Ic89f1c86cf6e3e0785b3663fe733b201d6f2f773
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1708382
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below new HALs
gops.fifo.add_sema_cmd() to insert HOST semaphore acquire/release methods
gops.fifo.get_sema_wait_cmd_size() to get size of acquire command buffer
gops.fifo.get_sema_incr_cmd_size() to get size of release command buffer
Separate out new API gk20a_fifo_add_sema_cmd() to implement semaphore acquire/
release sequence and set it to gops.fifo.add_sema_cmd()
Add gk20a_fifo_get_sema_wait_cmd_size() and gk20a_fifo_get_sema_incr_cmd_size()
to return respective command buffer sizes
Jira NVGPUT-16
Change-Id: Ia81a50921a6a56ebc237f2f90b137268aaa2d749
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1704490
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Switch all logging to nvgpu_log*(). gk20a_dbg* macros are
intentionally left there because of use from other repositories.
Because the new functions do not work without a pointer to struct
gk20a, and piping it just for logging is excessive, some log messages
are deleted.
Change-Id: I00e22e75fe4596a330bb0282ab4774b3639ee31e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1704148
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new HAL gops.mc.isr_nonstall() to handle nonstall interrupts
We already handle nonstall interrupts in nvgpu_intr_nonstall()
But this API is completely in linux specific code
Separate out os-independent code to handle nonstall interrupts in new API
mc_gk20a_isr_nonstall() and set it to HAL gops.mc.isr_nonstall() for all
existing chips
Call this HAL from nvgpu_intr_nonstall()
Jira NVGPUT-8
Change-Id: Iec6a56db03158a72a256f7eee8989a0a8a42ae2f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1706589
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below two new HALs
gops.fifo.runlist_hw_submit() to submit a new runlist to hardware
gops.fifo.runlist_wait_pending() to wait until runlist write is successful
Set existing API gk20a_fifo_runlist_wait_pending() to
gops.fifo.runlist_wait_pending HAL
Add new API gk20a_fifo_runlist_hw_submit() which submits the runlist to h/w
and set it to gops.fifo.runlist_hw_submit HAL
Jira NVGPUT-20
Change-Id: Ic23f7d947e30883aca0b536de818e79e14733195
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1700548
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gr_gv11b/gk20a_create_priv_addr_table() we do not consider floorswept FBPAs
and just calculate the unicast list assuming all FBPAs are present
This generates incorrect list of unicast addresses
Fix this introducing new HAL ops.gr.split_fbpa_broadcast_addr
Set gr_gv100_get_active_fpba_mask() for GV100
Set gr_gk20a_split_fbpa_broadcast_addr() for rest of the chips
gr_gv100_get_active_fpba_mask() will first get active FPBA mask and generate
unicast list only for active FBPAs
Bug 200398811
Jira NVGPU-556
Change-Id: Idd11d6e7ad7b6836525fe41509aeccf52038321f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1694444
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We currently use hard coded values of NV_PERF_PMMGPC_CHIPLET_OFFSET and
NV_PMM_FBP_STRIDE which are incorrect for Volta
Add new GR HAL get_pmm_per_chiplet_offset() to get correct value per-chip
Set gr_gm20b_get_pmm_per_chiplet_offset() for older chips
Set gr_gv11b_get_pmm_per_chiplet_offset() for Volta
Use HAL instead of hard coded values wherever required
Bug 200398811
Jira NVGPU-556
Change-Id: I947e7febd4f84fae740a1bc74f99d72e1df523aa
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1690028
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We have new broadcast registers on Volta, and we need to generate correct
unicast addresses for them so that we can write those registers to context image
Add new GR HAL create_priv_addr_table() to do this conversion
Set gr_gk20a_create_priv_addr_table() for older chips
Set gr_gv11b_create_priv_addr_table() for Volta
gr_gv11b_create_priv_addr_table() will use the broadcast flags and then generate
appriate list of unicast register for each broadcast register
Bug 200398811
Jira NVGPU-556
Change-Id: Id53a9e56106d200fe560ffc93394cc0e976f455f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1690027
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
With Volta we have more number of broadcast registers than previous chips
and we don't decode them right now in gr_gk20a_decode_priv_addr()
Add a new GR HAL decode_priv_addr() and set gr_gk20a_decode_priv_addr() for all
previous chips
Add and use gr_gv11b_decode_priv_addr() for Volta
gr_gv11b_decode_priv_addr() will decode all the broadcast registers and set
the broadcast flags apporiately
Define below new broadcast types
PRI_BROADCAST_FLAGS_PMMGPC
PRI_BROADCAST_FLAGS_PMM_GPCS
PRI_BROADCAST_FLAGS_PMM_GPCGS_GPCTPCA
PRI_BROADCAST_FLAGS_PMM_GPCGS_GPCTPCB
PRI_BROADCAST_FLAGS_PMMFBP
PRI_BROADCAST_FLAGS_PMM_FBPS
PRI_BROADCAST_FLAGS_PMM_FBPGS_LTC
PRI_BROADCAST_FLAGS_PMM_FBPGS_ROP
Bug 200398811
Jira NVGPU-556
Change-Id: Ic673b357a75b6af3d24a4c16bb5b6bc15974d5b7
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1690026
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Dump timeout save0 and save1 even if they could
be unreliable when fecs_tgt in set in save0 . This
is good to have for debug purposes.
-Add priv_ring hal for decode_error_code
-Decode fecs error code for supported error types
Bug 1998067
Change-Id: I60cb6902d099df4a7df45fa624e44d9e0d46360f
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1683014
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Current code does not compute priv error register offsets
properly. This leads to invalid decoding of priv errors, and
can also trigger additional priv errors.
- add GPU_LIT_GPC_PRIV_STRIDE define
- return proj_gpc_priv_stride for GPU_LIT_GPC_PRIV_STRIDE in hals
- use GPU_LIT_GPC_PRIV_STRIDE instead of GPU_LIT_GPC_STRIDE in
g->ops.priv_ring.isr() to compute priv error register offsets.
Bug 2093058
Change-Id: Ia7c36ccba0441126784bb0e00452f2cf1196ef71
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1682118
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Seema Khowala <seemaj@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GV100 ucode is changed so that it expects LIST_nv_perf_pma_ctx_reg list in
ctxsw buffer to be 256 byte aligned but same change is not applied to other
chip ucodes
ADD new HAL (*add_ctxsw_reg_perf_pma) to configure PMA register list and
define a common HAL gr_gk20a_add_ctxsw_reg_perf_pma() for all other
chips except GV100
Define a separate HAL for GV100 gr_gv100_add_ctxsw_reg_perf_pma() and fix
the required alignment in this function
Bug 1998067
Change-Id: Ie172fe90e2cdbac2509f2ece953cd8552e66fc56
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1676655
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
For LIST_nv_pm_fbpa_ctx_regs, we right now call
add_ctxsw_buffer_map_entries_subunits() to add registers corresponding
to all the FBPAs
But while configuring total number of registers, we do not consider
floorswept FBPAs and that causes misalignment in subsequent lists for GV100
Fix this by reading disabled/floorswept FBPAs from fuse and consider only those
FBPAs which are active for GV100
Add new HAL (*add_ctxsw_reg_pm_fbpa) to support this setting and define a
common HAL gr_gk20a_add_ctxsw_reg_pm_fbpa() for all chips except GV100
Define GV100 specific gr_gv100_add_ctxsw_reg_pm_fbpa() with above mentioned
implementation to consider floorsweeping
Bug 1998067
Change-Id: Id560551bb0b8142791c117b6d27864566c90b489
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1676654
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Added ops "pmu.alloc_super_surface" to create
memory space for pmu super surface
- Defined method nvgpu_pmu_sysmem_surface_alloc()
to allocate pmu super surface memory & assigned
to "pmu.alloc_super_surface" for gv100
- "pmu.alloc_super_surface" set to NULL for gp106
- Memory space of size "struct nv_pmu_super_surface"
is allocated during pmu sw init setup if
"pmu.alloc_super_surface" is not NULL &
free if error occur.
- Added ops "pmu_ver.config_pmu_cmdline_args_super_surface"
to describe PMU super surface details to PMU ucode
as part of pmu command line args command if
"pmu.alloc_super_surface" is not NULL.
- Updated pmu_cmdline_args_v6 to include member
"struct flcn_mem_desc_v0 super_surface"
- Free allocated memory for PMU super surface in
nvgpu_remove_pmu_support() method
- Added "struct nvgpu_mem super_surface_buf" to "nvgpu_pmu" struct
- Created header file "gpmu_super_surf_if.h" to include interface
about pmu super surface, added "struct nv_pmu_super_surface"
to hold super surface members along with rsvd[x] dummy space
to sync members offset with PMU super surface members.
Change-Id: I2b28912bf4d86a8cc72884e3b023f21c73fb3503
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1656571
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
