VBIOS link_disable_mask should be sufficient to find the connected
links. As VBIOS is not updated with correct mask, we parse the DT
node where we hardcode the link_id. DT method is not scalable as same
DT node is used for different dGPUs connected over PCIE. Remove the
DT parsing of link id and use HAL to get link_mask based on the GPU.
JIRA NVLINK-162
Change-Id: Idb7b639962928ce48711a0d7fc277c4c324bee91
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1738967
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The sequence of INIT* minion dlcmd varies between nvlink 2.0 and 2.2.
The order is strict for 2.2. Also there are new dlcmds added to the
nvlink bringup sequence. Add HAL to allow sequence update for nvlink 2.2.
Old sequence:
INITLANEENABLE-> INITDLPL
New Sequence:
INITDLPL->INITDLPL_TO_CHIPA->INITTL->INITLANEENABLE
JIRA NVLINK-176
Change-Id: I49e0a726f56e7d6122ac4cddf0f0e021d16f1926
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1738329
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Earlier implementation of railgate disable config is disabling
runtime pm during pm_init. This is causing multiple issues:
1. gpu rail will be on as soon as nvgpu driver probe is called.
Actual gpu hw init may happen at much later point of time.
2. This is breaking railgate_enable sysfs node functionality.
railgate_enable is not working if runtime pm is disabled.
To avoid all these issues for railgate disable, enable runtime pm
during pm_init and set auto-suspend delay to negative (-1), which
will disable runtime pm suspend calls.
Also fixed following issues along with this:
1. Updated railgate_enable debugfs implementation to use auto-suspend delay.
To disable railgating:
Set auto-suspend delay with negative value(-1) which will disable runtime
pm suspend.
To enable railgating:
Set auto-suspend delay with railgate_delay value.
Also removed redundant user_railgate_disabled gk20a device data and
replaced with can_railgate, where ever it is applicable.
2. Initialized default railgate_delay to 500msec to avoid railgate
on/off transitions with railigate enable from disabled state.
3. Created railgate_residency debug fs node irrespective of can_railgate
initial state. This is helping with the case, where initial state of
railgate state off and then railgate enable is done through sysfs node.
Bug 2073029
Change-Id: I531da6d93ba8907e806f65a1de2a447c1ec2665c
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1694944
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Before nvlink 2.2, driver was responsible for setting the NVLink clocks
during NVLink initialization. For the purpose of security, NVLink PLL
handling is moved to Minion in nvlink 2.2 and driver should stop writing
to these registers.
JIRA NVLINK-167
Change-Id: I18392a29c322da55053037bfde62c8f74ee75288
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1730597
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
RXDET is supported only on nvlink 2.2 devices and forward.
Add HAL to run RXDET selectively based on chip. RXDET needs to be
done after the links are out of reset but before any other link
level initialization.
minion_send_cmd is also made non-static to support RXDET
functionality.
JIRA NVLINK-160
Change-Id: Ic65b8dbc7281743f62072089ff3c805521ac9b38
Signed-off-by: Tejal Kudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1729525
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We receive bundle with address and 64 bit values from ucode on some platforms
This patch adds the support to handle 64 bit values
Add struct av64_gk20a to store an address and corresponding 64 bit value
Add struct av64_list_gk20a to store count and list of av64_gk20a
Add API alloc_av64_list_gk20a() to allocate the list that supports 64bit
values
In gr_gk20a_init_ctx_vars_fw(), if we see NETLIST_REGIONID_SW_BUNDLE64_INIT,
load the bundle64 state into above local structures
Add new HAL gops.gr.init_sw_bundle64() and call it from gk20a_init_sw_bundle()
if defined
Also load the bundle for simulation cases in gr_gk20a_init_ctx_vars_sim()
Jira NVGPUT-96
Change-Id: I1ab7fb37ff91c5fbd968c93d714725b01fd4f59b
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1736450
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add g->fifo_eng_timeout_us to define engine timeout in microseconds.
It is initialized with GRFIFO_TIMEOUT_CHECK_PERIOD_US. In RM server
case, it can be overriden with value defined in device tree.
Jira EVLR-2674
Change-Id: I69ac2ce779fe575566c8ba48e8cd2d0e6b2d93cf
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1728391
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below two new HALs
gops.fb.enable_hub_intr() to enable hub interrupts
gops.fb.disable_hub_intr() to disable hub interrupts
Set existing APIs gv11b_fb_enable/disable_hub_intr() to these HALs
Call the HALs everywhere instead of calling the APIs directly
Jira NVGPUT-44
Change-Id: Id299c6d228733ed365a71be6b180186776cc1306
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1725977
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-timeouts will be enabled only when timeouts_disabled_refcount
will reach 0
-timeouts_enabled debugfs will change from u32 type to file type
to avoid race enabling/disabling timeout from debugfs and ioctl
-unify setting timeouts_enabled from debugfs and ioctl
Bug 1982434
Change-Id: I54bab778f1ae533872146dfb8d80deafd2a685c7
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1588690
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Code related to MC module is updated for handling
MISRA violations
Rule 10.1: Operands shalln't be an inappropriate
essential type.
Rule 10.3: Value of expression shalln't be assigned
to an object with a narrow essential type.
Rule 10.4: Both operands in an operator shall have
the same essential type.
Rule 14.4: Controlling if statement shall have
essentially Boolean type.
Rule 15.6: Enclose if() sequences with braces.
JIRA NVGPU-646
JIRA NVGPU-659
JIRA NVGPU-671
Change-Id: Ia7ada40068eab5c164b8bad99bf8103b37a2fbc9
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1720926
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below new HALs for bios operations
gops.bios.devinit()
gops.bios.preos()
gops.bios.verify_devinit()
Export existing APIs gp106_bios_devinit() and gp106_bios_preos() and set them
to above HALs on gp106 and gv100
And call new HALs from gp106_bios_init() if supported instead of directly
calling APIs
Jira NVGPUT-48
Change-Id: Ic89f1c86cf6e3e0785b3663fe733b201d6f2f773
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1708382
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add NVGPU_IOCTL_CHANNEL_RESCHEDULE_RUNLIST ioctl to reschedule runlist,
and optionally check host and FECS status to preempt pending load of
context not belonging to the calling channel on GR engine during context
switch.
This should be called immediately after a submit to decrease worst case
submit to start latency for high interleave channel.
There is less than 0.002% chance that the ioctl blocks up to couple
miliseconds due to race condition of FECS status changing while being read.
For GV11B it will always preempt pending load of unwanted context since
there is no chance that ioctl blocks due to race condition.
Also fix bug with host reschedule for multiple runlists which needs to
write both runlist registers.
Bug 1987640
Bug 1924808
Change-Id: I0b7e2f91bd18b0b20928e5a3311b9426b1bf1848
Signed-off-by: David Li <davli@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1549050
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below new HALs
gops.fifo.add_sema_cmd() to insert HOST semaphore acquire/release methods
gops.fifo.get_sema_wait_cmd_size() to get size of acquire command buffer
gops.fifo.get_sema_incr_cmd_size() to get size of release command buffer
Separate out new API gk20a_fifo_add_sema_cmd() to implement semaphore acquire/
release sequence and set it to gops.fifo.add_sema_cmd()
Add gk20a_fifo_get_sema_wait_cmd_size() and gk20a_fifo_get_sema_incr_cmd_size()
to return respective command buffer sizes
Jira NVGPUT-16
Change-Id: Ia81a50921a6a56ebc237f2f90b137268aaa2d749
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1704490
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Added vf change inject support for gv10x
- Updated clk_pmu_vf_inject() to fill required data
for pascal or volta vf change inject support
- Added new ctrl clk interface for gv10x clk domain list
- Added pmu interface for gv10x clk domain list &
vf change inject request
- Modified clk cmd, msg & RPC id's to match
with chips_a_23609936 branch
Bug 200399373
Change-Id: Ib9dc10073386f63bdfd92110c7ec3e09b1c484ce
Signed-off-by: Vaikundanathan S <vaikuns@nvidia.com>
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1700746
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently gpu sysfs retrieves Fmax@Vmin by direct call into Tegra DVFS
driver that introduces compile time dependencies on CONFIG_TEGRA_DVFS.
In addition incorrect clock is used for DVFS information access.
Re-factored sysfs node to use generic GPU clock operation for Fmax@Vmin
read. This would fix a bug in target clock selection, and allows to
remove dependency of sysfs on CONFIG_TEGRA_DVFS.
Updated nvgpu_linux_get_fmax_at_vmin_safe operation itself so it can be
called on platforms that does not support Tegra DVFS, although 0 will
still be returned as Fmax@Vmin on such platforms.
Bug 2045903
Change-Id: I32cce25320df026288c82458c913b0cde9ad4f72
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1710924
Reviewed-by: Alex Waterman <alexw@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
segregated os-agnostic function from linux/sim.c and linux/sim_pci.c
to sim.c and sim_pci.c, while retaining os-specific functions.
renamed all gk20a_* api's to nvgpu_*.
renamed hw_sim_gk20a.h to nvgpu/hw_sim.h
moved hw_sim_pci.h to nvgpu/hw_sim_pci.h
JIRA VQRM-2368
Change-Id: I040a6b12b19111a0b99280245808ea2b0f344cdd
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1702425
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
PMU ucode is updated to include LDIV slowdown factor in gr_init_param command.
- Defined a new version gr_init_param_v2.
- Updated the PMU FW version code.
- Set the LDIV slowdown factor to 0x1e by default.
- Added sysfs entry to program ldiv_slowdown factor at runtime.
Bug 200391931
Change-Id: Ic66049588c3b20e934faff3f29283f66c30303e4
Signed-off-by: Deepak Goyal <dgoyal@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1674208
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new HAL gops.mc.isr_nonstall() to handle nonstall interrupts
We already handle nonstall interrupts in nvgpu_intr_nonstall()
But this API is completely in linux specific code
Separate out os-independent code to handle nonstall interrupts in new API
mc_gk20a_isr_nonstall() and set it to HAL gops.mc.isr_nonstall() for all
existing chips
Call this HAL from nvgpu_intr_nonstall()
Jira NVGPUT-8
Change-Id: Iec6a56db03158a72a256f7eee8989a0a8a42ae2f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1706589
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Implement a worker thread to replace the workqueue based
handling for clk arbiter update callbacks.
The work items scheduled with the thread are of two types,
update_vf_table and arb_update. Previously, there were two
workqueues for handling these two work struct's separately.
Now the single worker thread would process these two events.
If a work item of a particular type is scheduled to be run
on the worker, another instance of same type won't be
scheduled, which mirrors the linux workqueue behavior.
This also removes dependency on linux workqueues/work struct
and makes code portable to be used by QNX also.
Jira VQRM-3741
Change-Id: Ic27ce718c62c7d7c3f8820fbd1db386a159e28f2
Signed-off-by: Sourab Gupta <sourabg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1706032
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
clk_vin data structures updated as new calibration type (v20) is added.
GP106 header does not have vin calibration type.
Assuming V10 if calibration type is not V20.
Add fuse calibration for V20 type.
Bug 200399373
Change-Id: I9449de1ecb0d0873f3bc16f46660f93fab5b9eac
Signed-off-by: Vaikundanathan S <vaikuns@nvidia.com>
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1687591
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below two new HALs
gops.fifo.runlist_hw_submit() to submit a new runlist to hardware
gops.fifo.runlist_wait_pending() to wait until runlist write is successful
Set existing API gk20a_fifo_runlist_wait_pending() to
gops.fifo.runlist_wait_pending HAL
Add new API gk20a_fifo_runlist_hw_submit() which submits the runlist to h/w
and set it to gops.fifo.runlist_hw_submit HAL
Jira NVGPUT-20
Change-Id: Ic23f7d947e30883aca0b536de818e79e14733195
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1700548
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This patch deals with cleanups meant to make things simpler for the
upcoming os abstraction patches for the sync framework. This patch
causes some substantial changes which are listed out as follows.
1) sync_timeline is moved out of gk20a_fence into struct
nvgpu_channel_linux. New function pointers are created to facilitate os
independent methods for enabling/disabling timeline and are now named
as os_fence_framework. These function pointers are located in the struct
os_channel under struct gk20a.
2) construction of the channel_sync require nvgpu_finalize_poweron_linux()
to be invoked before invocations to nvgpu_init_mm_ce_context(). Hence,
these methods are now moved away from gk20a_finalize_poweron() and
invoked after nvgpu_finalize_poweron_linux().
3) sync_fence creation is now delinked from fence construction and move
to the channel_sync_gk20a's channel_incr methods. These sync_fences are
mainly associated with post_fences.
4) In case userspace requires the sync_fences to be constructed, we
try to obtain an fd before the gk20a_channel_submit_gpfifo() instead of
trying to do that later. This is used to avoid potential after effects
of duplicate work submission due to failure to obtain an unused fd.
JIRA NVGPU-66
Change-Id: I42a3e4e2e692a113b1b36d2b48ab107ae4444dfa
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1678400
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gr_gv11b/gk20a_create_priv_addr_table() we do not consider floorswept FBPAs
and just calculate the unicast list assuming all FBPAs are present
This generates incorrect list of unicast addresses
Fix this introducing new HAL ops.gr.split_fbpa_broadcast_addr
Set gr_gv100_get_active_fpba_mask() for GV100
Set gr_gk20a_split_fbpa_broadcast_addr() for rest of the chips
gr_gv100_get_active_fpba_mask() will first get active FPBA mask and generate
unicast list only for active FBPAs
Bug 200398811
Jira NVGPU-556
Change-Id: Idd11d6e7ad7b6836525fe41509aeccf52038321f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1694444
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
In gv11b_gr_egpc_etpc_priv_addr_table(), we call
gv11b_gr_update_priv_addr_table_smpc() to convert SMPC broadcast address into
list of unicast addresses
But before calling gv11b_gr_update_priv_addr_table_smpc() we sometimes
incorrectly set gpc_num/tpc_num to zero and that leads to generating incorrect
list of unicast addresses
Remove this incorrect initialization of gpc_num/tpc_num
Also update gv11b_gr_egpc_etpc_priv_addr_table() to receive tpc_num along with
gpc_num
Bug 2099717
Jira NVGPU-580
Change-Id: Idd4e5f78dbe6ca1800efae93c66355d06417d1f2
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1691373
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We currently use hard coded values of NV_PERF_PMMGPC_CHIPLET_OFFSET and
NV_PMM_FBP_STRIDE which are incorrect for Volta
Add new GR HAL get_pmm_per_chiplet_offset() to get correct value per-chip
Set gr_gm20b_get_pmm_per_chiplet_offset() for older chips
Set gr_gv11b_get_pmm_per_chiplet_offset() for Volta
Use HAL instead of hard coded values wherever required
Bug 200398811
Jira NVGPU-556
Change-Id: I947e7febd4f84fae740a1bc74f99d72e1df523aa
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1690028
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We have new broadcast registers on Volta, and we need to generate correct
unicast addresses for them so that we can write those registers to context image
Add new GR HAL create_priv_addr_table() to do this conversion
Set gr_gk20a_create_priv_addr_table() for older chips
Set gr_gv11b_create_priv_addr_table() for Volta
gr_gv11b_create_priv_addr_table() will use the broadcast flags and then generate
appriate list of unicast register for each broadcast register
Bug 200398811
Jira NVGPU-556
Change-Id: Id53a9e56106d200fe560ffc93394cc0e976f455f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1690027
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
With Volta we have more number of broadcast registers than previous chips
and we don't decode them right now in gr_gk20a_decode_priv_addr()
Add a new GR HAL decode_priv_addr() and set gr_gk20a_decode_priv_addr() for all
previous chips
Add and use gr_gv11b_decode_priv_addr() for Volta
gr_gv11b_decode_priv_addr() will decode all the broadcast registers and set
the broadcast flags apporiately
Define below new broadcast types
PRI_BROADCAST_FLAGS_PMMGPC
PRI_BROADCAST_FLAGS_PMM_GPCS
PRI_BROADCAST_FLAGS_PMM_GPCGS_GPCTPCA
PRI_BROADCAST_FLAGS_PMM_GPCGS_GPCTPCB
PRI_BROADCAST_FLAGS_PMMFBP
PRI_BROADCAST_FLAGS_PMM_FBPS
PRI_BROADCAST_FLAGS_PMM_FBPGS_LTC
PRI_BROADCAST_FLAGS_PMM_FBPGS_ROP
Bug 200398811
Jira NVGPU-556
Change-Id: Ic673b357a75b6af3d24a4c16bb5b6bc15974d5b7
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1690026
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The pmgr code is in theory common code. However there were uses
of Linux stuff within this code.
This patch cleans that up by deleting the unnecessary os_linux.h
includes, usage of kfree() and adds several platform fields to
the gk20a struct. The platform data is copied to the gk20a struct
in the platform initialization code so that this common code can
access said data without requiring any knowledge of the OS platform
data.
JIRA NVGPU-525
Change-Id: Ic4bb6021f60b0a0778779ab5f3e15b7e5ca98306
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1673825
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The patch adds the HAL interfaces for handling the usermode
submission, particularly allocating channel specific usermode
userd. These interfaces are currently implemented only on QNX,
and are created accordingly. As and when linux adds the
usermode submission support, we can revisit them
if any further changes are needed.
Change-Id: I790e0ebdfaedcdc5f6bb624652b1af4549b7b062
Signed-off-by: Sourab Gupta <sourabg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1683392
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
BIT() is defined as returning a 64-bit value. We use it to create the
log mask values, but the functions that accept log mask take only
u32 as parameter.
Use u64 as log mask parameter for the logging functions to match the
sizes.
Change-Id: I6f0803a7d04ee6a2ee725b5defc4cc14b5b7acf5
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1683818
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
