Renamed
- gk20a_tsg_set_runlist_interleave -> nvgpu_tsg_set_interleave
Moved set_interleave from runlist to tsg
- runlist.set_interleave -> tsg.set_interleave
Existing HAL was only setting tsg->interleave, and was not
accessing any register. This is now done in nvgpu_tsg_set_interleave
and tsg.set_interleave is only used in vgpu case.
Jira NVGPU-3156
Change-Id: I5dac1305afcbd950214316289cf704ee8b43fc89
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100610
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved the following HALs from fifo to tsg
- set_timeslice
- default_timeslice_us
Renamed
- gk20a_tsg_set_timeslice -> nvgpu_tsg_set_timeslice
- min_timeslice_us -> tsg_timeslice_min_us
- max_timeslice_us -> tsg_timeslice_max_us
Scale timeslice to take into account PTIMER clock in
nvgpu_runlist_append_tsg.
Removed gk20a_channel_get_timescale_from_timeslice, and
instead moved timeout and scale computation into runlist HAL,
when building TSG entry:
- runlist.get_tsg_entry
Use ram_rl_entry_* accessors instead of hard coded values
for default and max timeslices.
Added #defines for min, max and default timeslices.
Jira NVGPU-3156
Change-Id: I447266c087c47c89cb6a4a7e4f30acf834b758f0
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100052
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Only one h/w header is allowed per hal file. ramfc_*.c uses both
hw_ramfc_*.h and hw_pbdma_*.h. The pbdma dependencies are removed from
the HAL unit of ramfc by constructing new HAL functions for pbdma unit.
The HAL ops functions added are listed below.
get_gp_base
get_gp_base_hi
get_fc_formats
get_fc_pb_header
get_fc_subdevice
get_fc_target
get_ctrl_hce_priv_mode_yes
get_userd_aperture_mask
get_userd_addr
get_userd_hi_addr
get_fc_runlist_timeslice
get_config_auth_level_privileged
set_channel_info_veid
config_userd_writeback_enable
allowed_syncpoints_0_index_f
allowed_syncpoints_0_valid_f
allowed_syncpoints_0_index_v
These HAL ops uses the following new implementations.
gm20b_pbdma_get_gp_base
gm20b_pbdma_get_gp_base_hi
gm20b_pbdma_get_fc_formats
gm20b_pbdma_get_fc_pb_header
gm20b_pbdma_get_fc_subdevice
gm20b_pbdma_get_fc_target
gm20b_pbdma_get_ctrl_hce_priv_mode_yes
gm20b_pbdma_get_userd_aperture_mask
gm20b_pbdma_get_userd_addr
gm20b_pbdma_get_userd_hi_addr
gp10b_pbdma_get_fc_runlist_timeslice
gp10b_pbdma_get_config_auth_level_privileged
gp10b_pbdma_allowed_syncpoints_0_index_f
gp10b_pbdma_allowed_syncpoints_0_valid_f
gp10b_pbdma_allowed_syncpoints_0_index_v
gv11b_pbdma_get_fc_pb_header
gv11b_pbdma_get_fc_target
gv11b_pbdma_set_channel_info_veid
gv11b_pbdma_config_userd_writeback_enable
Jira NVGPU-3195
Change-Id: I849f16650046eca38c67b0d6e0e43cd2ab1ac224
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2102576
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move chip specific preempt code to hal/fifo
Move non-chip specific preempt code to common/fifo
Remove fifo.get_preempt_timeout
Rename gk20a_fifo_get_preempt_timeout -> nvgpu_preempt_get_timeout
Rename gk20a_fifo_preempt -> nvgpu_preempt_channel
Add fifo.preempt_trigger hal for issuing preempt
Add fifo.preempt_runlists_for_rc hal for preempting runlists during rc
Add fifo.preempt_poll_pbdma hal
Add nvgpu_preempt_poll_tsg_on_pbdma to be called from rc
JIRA NVGPU-3144
Change-Id: Idb089acaa0c6ca08de17487c3496459a61f0bcd4
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100819
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule-17.7 requires the return value of all functions to be
used. Fix is either to use the return value or change the function
to return void. This patch contains fixes for all 17.7 violations
in the following units:
- nvgpu.common.hal.fifo.runlist
- nvgpu.common.hal.fifo.fifo
JIRA NVGPU-3039
Change-Id: I9483f5cb623cfe36d6b26e41c33f124c24710c08
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2098765
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Rule-17.7 requires the return value of all functions to be
used. Fix is either to use the return value or change the function
to return void. This patch contains fixes for all 17.7 violations
in the following units:
- nvgpu.hal.bus
- nvgpu.hal.fb
- nvgpu.hal.fifo
- nvgpu.hal.gr
JIRA NVGPU-3153
Change-Id: Iac9477ee7c36a0f2f8840e178dc5418e600f9c84
Signed-off-by: Nicolas Benech <nbenech@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2100652
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved the following HALs from fifo to usermode
- fifo.ring_channel_doorbell -> usermode.ring_doorbell
- fifo.doorbell_token -> usermode.doorbell_token
- fifo.usermode_base -> usermode.base
Created the following HAL
- usermode.setup_hw
Jira NVGPU-2978
Change-Id: I856ea24c126fa22d2f3fe860d4b14087c6d7330b
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2094813
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add new API nvgpu_gr_setup_free_subctx() in common.gr.ctx to free subctx
Call this via hal g->ops.gr.setup.free_subctx()
Subctx allocations happens through gr.setup api right now hence it makes
sense to provide subctx free api through same unit
Remove g->ops.channel.free_ctx_header() hal since we now have gr.setup
hal
Remove gv11b/subctx_gv11b.* files since they are no longer needed and
all the code in them has been moved to common units
Jira NVGPU-1886
Change-Id: I3d58fc3665ed9b6ffba830249a4cd30af7b857f4
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2094994
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Create common/fifo/pbdma.c and move pbdma common code:
- nvgpu_pbdma_setup_sw
- nvgpu_pbdma_cleanup_sw
- nvgpu_pbdma_find_for_runlist
- nvgpu_pbdma_init_intr_descs
Moved the following HAL from fifo to pbdma
- fifo.find_pbdma_for_runlist -> pbdma.find_for_runlist
Added the following HALs
- fifo.init_pbdma_map
- pbdma.setup_sw
- pbdma.cleanup_sw
Jira NVGPU-2950
Change-Id: I17802ee61de669c3e17792b4505efb5e2bf530d3
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2092999
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved
-mmu_fault_pending mm ops to is_mmu_fault_pending mc ops
-mmu_fault_pending fb ops to is_mmu_fault_pending fb.intr ops. This
is needed to check if mmu fault intr is pending for volta onwards.
Added
is_mmu_fault_pending fifo ops. This is needed to check if mmu fault
interrupt is pending for chips prior to volta
JIRA NVGPU-1313
Change-Id: Ie8e778387cd486cb19b18c4aee734c581dcd9229
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2094895
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Renamed and moved from fifo to channel
gk20a_debug_dump_all_channel_status_ramfc -> nvgpu_channel_debug_dump_all
gk20a_dump_channel_status_ramfc -> gk20a_channel_debug_dump
gv11b_dump_channel_status_ramfc -> gv11b_channel_debug_dump
Moved nvgpu_channel_dump_info struct to channel.h
Moved nvgpu_channel_hw_state struct to channel.h
Moved dump_channel_status_ramfc fifo ops to channel ops
as debug_dump
JIRA NVGPU-2978
Change-Id: I696e5029d9e6ca4dc3516651b4d4f5230fe8b0b0
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2092709
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved init/deinit eng method buffers from fifo to tsg
- tsg.init_eng_method_buffers
- tsg.deinit_eng_method_buffers
Moved gv11b_fifo_init_ramfc_eng_method_buffer to the
following tsg HAL:
- tsg.bind_channel_eng_method_buffers
This HAL is now called during bind_channel.
Added the following ramin HAL:
- ramin.set_ramfc_eng_method_buffer
Jira NVGPU-2979
Change-Id: I96f6ff15d2176d4e3714fa8fe65a9126b3fff82c
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2087185
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved the following HALs from fifo to tsg:
- tsg.bind_channel
- tsg.unbind_channel
- tsg.unbind_channel_check_hw_state
- tsg.unbind_channel_check_ctx_reload
- tsg.unbind_channel_check_eng_faulted
bind_channel and unbind_channel HALs are optional,
and only implemented for vgpu:
- vgpu_tsg_bind_channel
- vgpu_tsg_unbind_channel
Moved the following code from fifo to tsg:
- nvgpu_tsg_bind_channel
- nvgpu_tsg_unbind_channel
- nvgpu_tsg_unbind_channel_check_hw_state
- nvgpu_tsg_unbind_channel_check_ctx_reload
- gv11b_tsg_unbind_channel_check_eng_faulted
tsg is now explictly passed to bind/unbind operations,
along with ch
Jira NVGPU-2979
Change-Id: I337a3d73ceef5ff320b036b14739ef0e831a28ee
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2084029
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
a) free_channel_ctx_header is used to free the channel's underlying subctx
and belongs to the hal.channel unit instead of fifo. Moved the same and
renamed the HAL ops to free_ctx_header. The function
gv11b_free_subctx_header is moved to channel_gv11b.* files and also
renamed to gv11b_channel_free_subctx_header.
b) ch_abort_clean_up is moved to hal.channel unit
c) channel_resume and channel_suspend are used to resume and suspend all
the serviceable channels. This belongs to hal.channel unit and are
moved from the hal.fifo unit.
The HAL ops channel_resume and channel_suspend are renamed to
resume_all_serviceable_ch and suspend_all_serviceable_ch respectively.
gk20a_channel_resume and gk20a_channel_suspend are also renamed to
nvgpu_channel_resume_all_serviceable_ch and
nvgpu_channel_suspend_all_serviceable_ch respectively.
d) set_error_notifier HAL ops belongs to hal.channel and is moved
accordingly.
Jira NVGPU-2978
Change-Id: Icb52245cacba3004e2fd32519029a1acff60c23c
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2083593
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
- Enable the reporting of PFIFO related errors such as engine syncpoint error,
memop timeout error, lb error to 3LSS framework.
- Remove the reporting of bind_error from gk20a since we already report it
from gv11b related fifo hal file.
Jira NVGPU-3087
Change-Id: Ic002be3a12a049010165870b861cdfb13a7f33d8
Signed-off-by: Rajesh Devaraj <rdevaraj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2088579
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Added the following HALs
- ramin.base_shift
- ramin.alloc_base
Use above HALs in mm, instead of using hw definitions.
Defined nvgpu_inst_block_ptr to
- get inst_block address,
- shift if by base_shift
- assert upper 32 bits are 0
- return lower 32 bits
Added missing #include for <nvgpu/mm.h>
Jira NVGPU-3015
Change-Id: I558a6f4c9fbc6873a5b71f1557ea9ad8eae2778f
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2077840
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move init_ce_engine_info from fifo to hal/engine unit as
implementation is chip specific.
Rename init_ce_engine_info to init_ce_info
Rename gp10b_fifo_init_ce_engine_info to gp10b_engine_init_ce_info
Rename gm20b_fifo_init_ce_engine_info to gm20b_engine_init_ce_info
JIRA NVGPU-1313
Change-Id: Idb9ba3f2550eff6bbe7163d12e48086f47d3f319
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2085427
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved below hals from {chip}/fifo_{chip}.[ch] to hal/fifo
get_mmu_fault_info
get_mmu_fault_desc
get_mmu_fault_client_desc
get_mmu_fault_gpc_desc
Moved gk20a_fifo_handle_dropped_mmu_fault to hal/fifo
JIRA NVGPU-1313
Change-Id: I949bcd482156c6e381006387372f13770277e8c5
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2083287
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Moved enable/disable HALs from fifo to tsg:
- tsg.enable
- tsg.disable
gk20a_tsg_enable and gv11b_tsg_enable are moved to HAL,
since they are chip specific, even though they do not
directly access chip registers.
Removed vgpu_gv11b_tsg_enable as it was identical to
gv11b_tsg_enable.
Changed gv11b_fifo_locked_abort_runlist_active_tsgs and
gv11b_fifo_teardown_ch_tsg to use tsg.enable HAL instead
of calling directly gk20a_disable_tsg HAL implementation.
Jira NVGPU-2979
Change-Id: I721650c64dcf8cd158652e362292af45df43819f
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/2083156
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
