Fix MISRA rule 10.1 violations involving gk20a_nonstall_ops
enums by replacing them with with corresponding #defines.
Because these values can be used in expressions that require
unsigned values (e.g. bitwise OR) we cannot use enums.
The g->ce2.isr_nonstall() function was previously returning an
int that was a combination of gk20a_nonstall_ops enum bits which
led to the violations.
JIRA NVGPU-650
Change-Id: I6210aacec8829b3c8d339c5fe3db2f3069c67406
Signed-off-by: Scott Long <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1796242
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This reverts commit 0b02c8589d.
Originally change was reverted as it was making ap_compute test on
embedded-qnx-hv e3550-t194 fail. With fixes related to replacing tsg
preempt with runlist preempt during teardown, preempt timeout set to
100 ms (earlier this was set to 1000ms for t194 and 3000ms for legacy
chips) and not issuing preempt timeout recovery if preempt fails, helped
resolve the issue.
Bug 200426402
Change-Id: If9a68d028a155075444cc1bdf411057e3388d48e
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1762563
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Add support for aborting runlist/s. Aborting runlist/s,
will abort all active tsgs and associated active channels
within these active tsgs
-Bare channels are no longer supported. Remove recovery
support for bare channels. In case there are bare
channels, recovery will trigger runlist abort
Bug 2125776
Bug 2108544
Bug 2105322
Bug 2092051
Bug 2048824
Bug 2043838
Bug 2039587
Bug 2028993
Bug 2029245
Bug 2065990
Bug 1945121
Bug 200401707
Bug 200393631
Bug 200327596
Change-Id: I6bec8a0004508cf65ea128bf641a26bf4c2f236d
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1640567
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
-is_preempt_pending hal does not need timeout_rc_type input param as
for volta, reset_eng_bitmask is saved if preempt times out. For
legacy chips, recovery triggers mmu fault and mmu fault handler
takes care of resetting engines.
-For volta, no special input param needed to differentiate between
preempt polling during normal scenario and preempt polling during
recovery. Recovery path uses preempt_ch_tsg hal to issue preempt.
This hal does not issue recovery if preempt times out.
Bug 2125776
Bug 2108544
Bug 2105322
Bug 2092051
Bug 2048824
Bug 2043838
Bug 2039587
Bug 2028993
Bug 2029245
Bug 2065990
Bug 1945121
Bug 200401707
Bug 200393631
Bug 200327596
Change-Id: Ie76a18ae0be880cfbeee615859a08179fb974fa8
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1709799
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add gk20a_fifo_profile_snapshot() to store the submit time in a
profiling entry that was acquired from gk20a_fifo_profile_acquire().
Also get rid of ifdef CONFIG_DEBUG_FS by stubbing the acquire and free
functions when debugfs is not enabled. This reduces some cyclomatic
complexity in the submit path.
Jira NVGPU-708
Change-Id: I39829a6475cfe3aa582620219e420bde62228e52
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1729545
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Code related to MC module is updated for handling
MISRA violations
Rule 10.1: Operands shalln't be an inappropriate
essential type.
Rule 10.3: Value of expression shalln't be assigned
to an object with a narrow essential type.
Rule 10.4: Both operands in an operator shall have
the same essential type.
Rule 14.4: Controlling if statement shall have
essentially Boolean type.
Rule 15.6: Enclose if() sequences with braces.
JIRA NVGPU-646
JIRA NVGPU-659
JIRA NVGPU-671
Change-Id: Ia7ada40068eab5c164b8bad99bf8103b37a2fbc9
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1720926
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add NVGPU_IOCTL_CHANNEL_RESCHEDULE_RUNLIST ioctl to reschedule runlist,
and optionally check host and FECS status to preempt pending load of
context not belonging to the calling channel on GR engine during context
switch.
This should be called immediately after a submit to decrease worst case
submit to start latency for high interleave channel.
There is less than 0.002% chance that the ioctl blocks up to couple
miliseconds due to race condition of FECS status changing while being read.
For GV11B it will always preempt pending load of unwanted context since
there is no chance that ioctl blocks due to race condition.
Also fix bug with host reschedule for multiple runlists which needs to
write both runlist registers.
Bug 1987640
Bug 1924808
Change-Id: I0b7e2f91bd18b0b20928e5a3311b9426b1bf1848
Signed-off-by: David Li <davli@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1549050
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Release runlist_lock and then initiate recovery if preempt
timed out. Also do not issue preempt if ch, tsg or runlist
id is invalid. tsgid could be invalid for below call trace
gk20a_prepare_poweroff->gk20a_channel_suspend->
*_fifo_preempt_channel->*_fifo_preempt_tsg
Bug 2065990
Bug 2043838
Change-Id: Ia1e3c134f06743e1258254a4a6f7256831706185
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1662656
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below new HALs
gops.fifo.add_sema_cmd() to insert HOST semaphore acquire/release methods
gops.fifo.get_sema_wait_cmd_size() to get size of acquire command buffer
gops.fifo.get_sema_incr_cmd_size() to get size of release command buffer
Separate out new API gk20a_fifo_add_sema_cmd() to implement semaphore acquire/
release sequence and set it to gops.fifo.add_sema_cmd()
Add gk20a_fifo_get_sema_wait_cmd_size() and gk20a_fifo_get_sema_incr_cmd_size()
to return respective command buffer sizes
Jira NVGPUT-16
Change-Id: Ia81a50921a6a56ebc237f2f90b137268aaa2d749
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1704490
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below rc_types to be passed to gk20a_fifo_recover
MMU_FAULT
PBDMA_FAULT
GR_FAULT
PREEMPT_TIMEOUT
CTXSW_TIMEOUT
RUNLIST_UPDATE_TIMEOUT
FORCE_RESET
SCHED_ERR
This is nice to have to know what triggered recovery.
Bug 2065990
Change-Id: I202268c5f237be2180b438e8ba027fce684967b6
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1662619
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add below two new HALs
gops.fifo.runlist_hw_submit() to submit a new runlist to hardware
gops.fifo.runlist_wait_pending() to wait until runlist write is successful
Set existing API gk20a_fifo_runlist_wait_pending() to
gops.fifo.runlist_wait_pending HAL
Add new API gk20a_fifo_runlist_hw_submit() which submits the runlist to h/w
and set it to gops.fifo.runlist_hw_submit HAL
Jira NVGPUT-20
Change-Id: Ic23f7d947e30883aca0b536de818e79e14733195
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1700548
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
The patch declares globally few channel/fifo HAL functions
required for QNX code compilation (as they are being referred
elsewhere in QNX code). This is required as a part of
bringing in the nvgpu Channel/FIFO HAL into QNX.
Jira VQRM-3058
Change-Id: Ia176535b64de981d2f7ddb20f62015a0da74fd2a
Signed-off-by: Sourab Gupta <sourabg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1662411
GVS: Gerrit_Virtual_Submit
Tested-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Lots of code paths were split to T19x specific code paths and structs
due to split repository. Now that repositories are merged, fold all of
them back to main code paths and structs and remove the T19x specific
Kconfig flag.
Change-Id: Id0d17a5f0610fc0b49f51ab6664e716dc8b222b6
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1640606
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
TSG/CHANNEL_SET_PRIORITY IOCTLs are deprecated and user space should be using
combination of timeslice and interleave levels to decide the priority
Hence remove the IOCTLs and all corresponding APIs
Jira NVGPU-393
Change-Id: I7cf0785689269536eca0c278c774b0e9e74f8c2f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1598581
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
This is needed for t19x during eng preempt done polling.
E.g. copy engine (CE) stall interrupt should not prevent GR
from finishing preemption. In order to check if current stall
interrupt is valid for the engine being polled for
preemption completion, function to provide engine
intr mask is needed. With this, polling code can make sure
there are no stall interrupts pending for the engine being
polled for preemption done. If stall interrupts
are pending for an engine, preemption will never finish.
Bug 200277163
Bug 1945121
Change-Id: Ie1ccac52c3e8d453a49084e195f2e7eaafb8f057
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1584065
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
All the runlist levels NVGPU_RUNLIST_INTERLEAVE_LEVEL_* are declared in linux
specific uapi header and used in common code
But since common code should be linux-independent, move these uses out of
common code
Define new runlist levels NVGPU_FIFO_RUNLIST_INTERLEAVE_LEVEL_* in common code
and use them wherever required
Add new API nvgpu_get_common_runlist_level() to get common runlist level of
the form NVGPU_FIFO_RUNLIST_INTERLEAVE_LEVEL_* from linux specific runlist
level of the form NVGPU_RUNLIST_INTERLEAVE_LEVEL_*
Jira NVGPU-259
Change-Id: Ic19239f0f8275683d5d1b981df530acd90e6dfbb
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1594327
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Move much of the remaining generic MM code to a new common location:
common/mm/mm.c. Also add a corresponding <nvgpu/mm.h> header. This
mostly consists of init and cleanup code to handle the common MM
data structures like the VIDMEM code, address spaces for various
engines, etc.
A few more indepth changes were made as well.
1. alloc_inst_block() has been added to the MM HAL. This used to be
defined directly in the gk20a code but it used a register. As a
result, if this register hypothetically changes in the future,
it would need to become a HAL anyway. This path preempts that
and for now just defines all HALs to use the gk20a version.
2. Rename as much as possible: global functions are, for the most
part, prepended with nvgpu (there are a few exceptions which I
have yet to decide what to do with). Functions that are static
are renamed to be as consistent with their functionality as
possible since in some cases function effect and function name
have diverged.
JIRA NVGPU-30
Change-Id: Ic948f1ecc2f7976eba4bb7169a44b7226bb7c0b5
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1574499
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Function to query interleave name depends on IOCTL flag definition.
Move that code to fifo_gk20a.c to remove Linux dependency in header.
Change-Id: I6d6a80e550bf30973b2be09febc2347890b77d25
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1577249
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Alex Waterman <alexw@nvidia.com>
GVS: Gerrit_Virtual_Submit
We right now call gk20a_fifo_tsg_unbind_channel_verify_status() to verify
channel status while unbinding a channel from TSG while closing
Add support to do this verification per-platform and keep this disabled
for vgpu platforms
Bug 200327095
Change-Id: I19fab41c74d10d528d22bd9b3982a4ed73c3b4ca
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1572368
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
We right now remove a channel from TSG list and disable all the channels in
TSG while removing a channel from TSG
With this sequence if any one channel in TSG is closed, rest of the channels
are set as timed out and cannot be used anymore
We need to fix this sequence as below to allow removing a channel from active
TSG so that rest of the channels can still be used
- disable all channels of TSG
- preempt TSG
- check if CTX_RELOAD is set if support is available
if CTX_RELOAD is set on channel, it should be moved to some other channel
- check if FAULTED is set if support is available
- if NEXT is set on channel then it means channel is still active
print out an error in this case for the time being until properly handled
- remove the channel from runlist
- remove channel from TSG list
- re-enable rest of the channels in TSG
- clean up the channel (same as regular channels)
Add below fifo operations to support checking channel status
g->ops.fifo.tsg_verify_status_ctx_reload
g->ops.fifo.tsg_verify_status_faulted
Define ops.fifo.tsg_verify_status_ctx_reload operation for gm20b/gp10b/gp106
as gm20b_fifo_tsg_verify_status_ctx_reload()
This API will check if channel to be released has CTX_RELOAD set, if yes
CTX_RELOAD needs to be moved to some other channel in TSG
Remove static from channel_gk20a_update_runlist() and export it
Bug 200327095
Change-Id: I0dd4be7c7e0b9b759389ec12c5a148a4b919d3e2
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1560637
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Due to a h/w bug in Maxwell and Pascal we first need to enable all channels with
NEXT and CTX_RELOAD set in a TSG, and then rest of the channels should be
enabled
Add this sequence to gk20a_tsg_enable()
Add new APIs to enable/disable scheduling of TSG runlist
gk20a_fifo_enable_tsg_sched()
gk20a_fifo_disble_tsg_sched()
Add new APIs to check if channel has NEXT or CTX_RELOAD set
gk20a_fifo_channel_status_is_next()
gk20a_fifo_channel_status_is_ctx_reload()
Bug 1739362
Change-Id: I4891cbd7f22ebc1e0bf32c52801002cdc259dbe1
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1560636
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
NVGPU_SUBMIT_GPFIFO_FLAGS_RESCHEDULE_RUNLIST causes host to expire
current timeslice and reschedule from front of runlist.
This can be used with NVGPU_RUNLIST_INTERLEAVE_LEVEL_HIGH to make a
channel start sooner after submit rather than waiting for natural
timeslice expiration or block/finish of currently running channel.
Bug 1968813
Change-Id: I632e87c5f583a09ec8bf521dc73f595150abebb0
Signed-off-by: David Li <davli@nvidia.com>
Reviewed-on: http://git-master/r/#/c/1537198
Reviewed-on: https://git-master.nvidia.com/r/1537198
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Remove gk20a support. Leave only gk20a code which is reused by other
GPUs.
JIRA NVGPU-38
Change-Id: I3d5f2bc9f71cd9f161e64436561a5eadd5786a3b
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master/r/1507927
GVS: Gerrit_Virtual_Submit
To support deterministic channels even with platforms where railgating
is supported, have each deterministic-marked channel hold a power
reference during their lifetime, and skip taking power refs for jobs in
submit path for those.
Previously, railgating blocked deterministic submits in general because
of gk20a_busy()/gk20a_idle() calls in submit path possibly taking time
and more significantly because the gpu may need turning on which takes a
nondeterministic and long amount of time.
As an exception, gk20a_do_idle() can still block deterministic submits
until gk20a_do_unidle() is called. Add a rwsem to guard this. VPR resize
needs do_idle, which conflicts with deterministic channels' requirement
to keep the GPU on. This is documented in the ioctl header now.
Make NVGPU_GPU_FLAGS_SUPPORT_DETERMINISTIC_SUBMIT_NO_JOBTRACKING always
set in the gpu characteristics now that it's supported. The only thing
left now blocking NVGPU_GPU_FLAGS_SUPPORT_DETERMINISTIC_SUBMIT_FULL is
the sync framework.
Make the channel debug dump show which channels are deterministic.
Bug 200291300
Jira NVGPU-70
Change-Id: I47b6f3a8517cd6e4255f6ca2855e3dd912e4f5f3
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: http://git-master/r/1483038
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Since all debugfs code is Linux specific, remove
it from common code and move it to Linux module
Debugfs code is now divided into below
module specific files :
common/linux/debug.c
common/linux/debug_cde.c
common/linux/debug_ce.c
common/linux/debug_fifo.c
common/linux/debug_gr.c
common/linux/debug_mm.c
common/linux/debug_allocator.c
common/linux/debug_kmem.c
common/linux/debug_pmu.c
common/linux/debug_sched.c
Add corresponding header files for above modules too
And compile all of above files only if CONFIG_DEBUG_FS is set
Some more details of the changes made
- Move and rename gk20a/debug_gk20a.c to common/linux/debug.c
- Move and rename gk20a/debug_gk20a.h to include/nvgpu/debug.h
- Remove gm20b/debug_gm20b.c and gm20b/debug_gm20b.h and call
gk20a_init_debug_ops() directly from gm20b_init_hal()
- Update all debug APIs to receive struct gk20a as parameter
instead of receiving struct device pointer
- Update API gk20a_dmabuf_get_state() to receive struct gk20a
pointer instead of struct device
- Include <nvgpu/debug.h> explicitly in all files where debug
operations are used
- Remove "gk20a/platform_gk20a.h" include from HAL files
which no longer need this include
- Add new API gk20a_debug_deinit() to deinitialize debugfs
and call it from gk20a_remove()
- Move API gk20a_debug_dump_all_channel_status_ramfc() to
gk20a/fifo_gk20a.c
Jira NVGPU-62
Change-Id: I076975d3d7f669bdbe9212fa33d98529377feeb6
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/1488902
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
This is needed to take care of gp10b h/w header
changes. gp10b changes as compared to legacy gpu chips
-fault_info_fault_type field width is changed
-fault_info_write field is removed
-fault_info_access_type field is added
-fault_info_engine_subid is removed
-fault_info_client_type is added
-fault_info_client field width has changed
JIRA GPUT19X-7
JIRA GPUT19X-12
Change-Id: Iebf28cc6c851830524049b67a71cd72fb4a28948
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: http://git-master/r/1487319
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Make the watchdog notice also fine-grained changes within a single
pushbuffer - by tracking just the gpfifo get, the watchdog could wake
when the channel hasn't really been stuck but processing a relatively
large or slow pushbuf.
Jira NVGPU-72
Change-Id: I15374eea5d9abc9d3725a79d0b960503237e478c
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: http://git-master/r/1485919
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Add the following ioctls
- NVGPU_CHANNEL_IOCTL_GET_TIMESLICE for channel timeslice in us
- NVGPU_TSG_IOCTL_GET_TIMESLICE for TSG timeslice in us
If timeslice has not been set explicitly, ioctl returns the
default timeslice that will be used when programming the runlist
entry.
Bug 1883271
Change-Id: Ib18fdd836323b1a2d4efceb1e27d07713bd6fca5
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: http://git-master/r/1469040
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
