In gm20b_channel_bind an nvgpu_smp_wmb() was used presumably to
prevent MMIO writes from being re-ordered after the memory write
to 'ch->bound'. If that was to happen, then unbind routine could
observe the channel as bound and issue concurrent MMIO writes
to unbind the channel. Assuming, the barrier was to prevent
such race, it should have been an nvgpu_wmb(), since
nvgpu_smp_wmb() is for inner shareable domain only.
However, the race possibility between unbind called from close
path and bind from ALLOC_GPFIFO should be ruled out because
close will wait for any active devctl/ioctl to finish before
proceeding.
The race possibility between unbind called from
suspend_all_serviceable_ch path and bind from ALLOC_GPFIFO should
be ruled out because ALLOC_GPFIFO has power refcount at the start
of devctl/ioctl and suspend_all_serviceable_ch is called from
prepare_poweroff path which ensure that power refcount is 0.
Removed nvgpu_smp_wmb().
Jira NVGPU-4927
Change-Id: Ic4f072df364926c10be84e42b83394c13fc97fdc
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2298959
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: Shashank Singh <shashsingh@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Implmented functions to load and execute PUB which
is the safety POR.
PUB has following functionality:
1) Lower PLM
2) Reset PMU
3) FBPA register access to devtools
Secure Boot and Runtime (SBR) microcode comprises of
single PLM Update Binary (PUB) which will execute on
SEC2 Engine Falcon. NVGPU shall load and execute PUB
and wait for falcon halt. On successful halt NVGPU
shall proceed with ns ucode loading on respective
falcons.
NVGPU-4549
Change-Id: I8ea897a026bbe2b1714823aba51bfa51864dd68a
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2292330
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Current clk unit has multiple header files under include folder.
This has combination of public struct which is accessed outside the
unit and private struct which is accessed within clk unit.
This patch segregates them based on their accessibility.
All private items are moved into ucode_clk_inf.h from include which only
clk can access.
All public items are moved into include/clk.h which other units can
access and removed the clk_xxx.h files
NVGPU-4689
Change-Id: I469270ae539e09a3f6fe6187207791732407863e
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2298220
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, we are performing obj ctx alloction for bellow classes
1. VOLTA_COMPUTE_A
2. VOLTA_DMA_COPY_A
3. VOLTA_CHANNEL_GPFIFO_A
In safety, we use Async CE but not GRCE.
So allocating obj context only for COMPUTE_A and return success(0) for
all other valid classes, after setting class in the channel struct.
Jira NVGPU-4378
Change-Id: Ie99872e062cc66f9ddf699397a13df85c3d8d59e
Signed-off-by: sagar <skadamati@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2287486
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Current clk unit has multiple header files under pmuif folder.
This has combination of public struct which is accessed outside the
unit and private struct which is accessed within clk unit.
This patch segregates them based on their accessibility.
All private items are moved into ucode_clk_inf.h from pmuif which only
clk can access.
All public items are moved into include/clk.h which other units can
access
This will help in documentation of items for public items.
NVGPU-4491
Change-Id: Iccb0571e05ecb3cb13363390bed8c7214409b543
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2292318
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Currently, size of zbc index table is defined as a macro. This macro is
independent of the number of address bits in the ltc zbc index register.
Adding below hal will update zbc index table size as per number of
address bits.
Add hal to get gr_zbc_index_table_size:
u32 (*zbc_table_size)(struct gk20a *g);
ZBC index table address 0 is reserved. Logic to start zbc table index
from 1 is moved to corresponding hals.
JIRA NVGPU-4838
Change-Id: I700cadfdd1f3dc5f323055b8f44d769d6627920a
Signed-off-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2288479
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Current volt unit has multiple header files under pmuif folder.
This has combination of public struct which is accessed outside the
unit and private struct which is accessed within volt unit.
This patch segregates them based on their accessibility.
All private items are moved into ucode_volt_inf.h from pmuif which only
volt can access.
All public items are moved into include/volt.h which other units can
access
This will help in documentation of items for public items.
NVGPU-4492
Change-Id: Id40bf4922408a55f1e67d071be726839ac57718f
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2289114
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
From gv11b onwards, FECS ucode returns an ACK for set watchdog
timeout method. Failure to wait for this ACK was leading to races,
and in some cases, the ACK could be mistaken for the reply to the
next method.
In particular, this happened for the discover golden image size
method which is sent after set watchdog timeout.
With instrumented FECS ucode, it takes longer for the code to
process the set watchdog timeout method, and the write to ack
that method could happen after nvgpu driver clears the mailbox to
send the discover image size method.
With an invalid golden context image size, FECS ended up causing
an MMU fault while attempting to save past allocated buffer.
Added NVGPU_GR_FALCON_METHOD_SET_WATCHDOG_TIMEOUT to be used with
gops_gr_falcon.ctrl_ctxsw, and implemented 2 variants:
- gm20b_gr_falcon_ctrl_ctxsw, without ACK
- gv11b_gr_falcon_ctrl_ctxsw, with ACK
Added NVGPU_GR_FALCON_SUBMIT_METHOD_F_LOCKED flag to allow
executing above method without re-acquiring FECS lock. Longer term,
the 'flags' could be added to gop_gr_falcon.ctrl_ctxsw parameters.
Use gops_gr_falcon.ctrl_ctxsw instead of register writes to invoke
set watchdog timeout method in gm20b_gr_falcon_wait_ctxsw_ready.
Also replaced calls to gm20b_gr_falcon_ctrl_ctxsw to
gops_gr.falcon.ctrl_ctxsw when appropriate, since there are
multiple variants (gm20b, gp10b and gv11b).
Last, fixed clearing of mailbox 0 in gm20b_gr_falcon_bind_instblk.
Bug 200586923
Change-Id: I653b9a216555eec8cd4bb01d6f202bc77b75a939
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2287340
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Address following code inspection gaps:
1. Fix the header guards for *gating_reglist.h files.
2. Remove ctxsw_firmware slcg/blcg mention from doxygen
comments as that hal is removed.
3. Add therm slcg function and description to doxygen.
4. Add defgroups for including enums/macros in swud.
JIRA NVGPU-4797
Change-Id: I26f2e50b556bcac1486175143ab070f0c3c56c36
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2288030
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Address following issues uncovered during inspection:
1. Remove the doxygen comment from nvgpu_wait_for_deferred_interrupts
definition.
2. Use NVGPU_MC_INTR_STALLING instead of hardcoding the index.
3. Define doxygen groups NVGPU_MC_UNIT_ENUMS,
NVGPU_MC_INTR_TYPE_DEFINES, NVGPU_MC_INTR_UNIT_DEFINES and
NVGPU_MC_INTR_ENABLE_DEFINES.
4. Update the doxygen comments.
5. Fix the cleanup, typo in the description of the test
test_wait_for_deferred_interrupts.
JIRA NVGPU-4795
Change-Id: Ifc6756832aabf9dd42ee174eb1373495e6d38c86
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2287627
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
For integration testing in safety build, we need to test ctxsw firmware
error codes. inorder to test this, we need some instrumentation in
nvgpu driver.
Added below instrumentation for CTXSW FW error code integration testing.
1. Reduce the ctxsw watchdog time, so ctxsw watchdog always triggered.
Use CONFIG_NVGPU_CTXSW_FW_ERROR_WDT_TESTING for testing watchdog
2. Submit unsupported method to CTXSW FW, it will trigger err.
Use CONFIG_NVGPU_CTXSW_FW_ERROR_CODE_TESTING for testing err code.
JIRA NVGPU-4471
Change-Id: Ib45a946b3e38d3b6dd5bbee277c5d3e7c55521c0
Signed-off-by: sagar <skadamati@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2284048
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Ankur Kishore <ankkishore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
- "include/trace/events/gk20a.h" file was having GPL2 license
(which should not used for QNX code). This file was used for
compiling linux userspace driver("libnvgpu-drv.so") and was used for
unit testing on QNX.
- This patch removes stubs in "include/trace/events/gk20a.h" file.
(which were used for linux userspace driver.)
- For QNX driver, "nvgpu_rmos/trace/events/gk20a.h" was used.
This patch moves that file to "include/nvgpu/posix/trace_gk20a.h" and
does relevant license change. This same file will be used for linux
userspace driver.
- This patch also creates a new file "include/nvgpu/trace.h" which
selects proper trace file depending on the config.
Bug 2802414
Change-Id: Icdfb251e5698073f986753a969e804161af3ecc5
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2286388
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
MISRA Advisory Rule 2.5 states that a project should not contain unused
macro declarations.
While most of the violations in the nvgpu driver are due to unused
macros from hw headers, devinit-related headers, etc. there is a small
number that are due to things like:
* macros not being used when they could/should be
* macros in C files that are really not referenced
* CPP build flag mismatches
This change eliminates such violations from the following:
* replace constants with existing macros in timeout conversion code
* wrap nvgpu_gmmu_dbg macro #defines in #ifdef CONFIG_NVGPU_TRACE/#endif
* wrap MAX_MC_INTR_REGS #define in #ifdef CONFIG_NVGPU_NON_FUSA/#endif
* remove unused FECS_MAILBOX_0_ACK_RESTORE from runlist code
* wrap BACKTRACE_MAXSIZE macro with #ifndef _QNX_SOURCE/#endif
Jira NVGPU-3178
Change-Id: I2bc72f706d7af3f8e7b062126e8543d0dc8ac250
Signed-off-by: Scott Long <scottl@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2284419
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vedashree Vidwans <vvidwans@nvidia.com>
Reviewed-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Adeel Raza <araza@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Xavier Chip Product POR was updated to 20G only. No more qual work
happening for 16G. So we do not plan to support 16G. Now that we have
a single speed left, remove the code added to support nvlink speed from
VBIOS as it is redundant.
JIRA NVGPU-2964
Change-Id: Icd71ebb8271240818e36d40bf73c60f0c5beb6bf
Signed-off-by: tkudav <tkudav@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2284175
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
-Created perf.h file and moved all private functions
and structures into it
-Created single sw_setup/pmu_setup for whole perf
unit
-Changed public function and structure names as per
standard format
-Deleted lpwr unit specific file from make file as
it is no longer used
-Removed support_vfe and support_changeseq flags as
it is no longer used
-Removed clk_set_boot_fll_clks_per_clk_domain function
as it is no longer used for tu10a
-Removed perf unit headers from pmuif folder
NVGPU-4448
Change-Id: Ia29e5b5a1a960b5474a929d8797542bf6c0eccf1
Signed-off-by: rmylavarapu <rmylavarapu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2283587
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
As a part of refactoring, we need to move the volt functions from
pmu_pstate.c to volt.c as it belongs there and also move the
arbitor specific functions under CLK_ARB as they will be removed
from safety build.
This patch does the following
*Move volt setup from pmu_pstate to volt
*Move clk freq related functions into CLK_ARB
*Replace pmu.h with nvgpu_mem.h in boardobj.h
*Rename obj_volt to nvgpu_pmu_volt
NVGPU-4491
NVGPU-4492
Change-Id: I9abc96f695fce41893311982a80dc3656aaa64d6
Signed-off-by: Abdul Salam <absalam@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2282361
Reviewed-by: Ramesh Mylavarapu <rmylavarapu@nvidia.com>
Reviewed-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
The HAL gops_ltc.init_fs_state is private to the common.ltc unit, thus
the gv11b implementation gv11b_ltc_init_fs_state is private. So, hide it
from doxygen to cleanup SWVR traceability.
JIRA NVGPU-4818
Change-Id: I141d89e6e4859fb9dd554a2943a39939e6461084
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2280642
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Cleanup issues with traceability for common.mc:
- Move these declarations under macros or @cond as they are either
non-fusa or private functions to the unit:
- gm20b_mc_is_enabled
- mc_gp10b_log_pending_intrs
- mc_gp10b_ltc_isr
- gv11b_mc_is_intr_hub_pending
- Fix typo in SWUTS for gv11b_mc_is_stall_and_eng_intr_pending
JIRA NVGPU-4818
Change-Id: I53a332627772e4d793430159ac1924c8f9ce8c1c
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2280640
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
Below functions in common.gr hal subunits include unnecessary
asserts to ensure value is not truncated when parsing into U32 size.
gm20b_gr_init_commit_global_attrib_cb()
gp10b_gr_init_commit_global_bundle_cb()
gp10b_gr_init_commit_global_pagepool()
gv11b_gr_init_commit_global_attrib_cb()
Make use of nvgpu_safe_cast_u64_to_u32() and remove unnecessary
asserts
gp10b_gr_init_commit_global_bundle_cb() function checks if size <=
U32_MAX value. But since size is declared as u32, it will always be
<= U32_MAX value so there is no point in the check.
Remove unnecessary check.
Jira NVGPU-4778
Change-Id: I9562afd1b31c3c6b095f607cbdf725d33d87effb
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2279898
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: svc-mobile-misra <svc-mobile-misra@nvidia.com>
Reviewed-by: svc-mobile-cert <svc-mobile-cert@nvidia.com>
Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
GVS: Gerrit_Virtual_Submit
gm20b_pbdma_handle_intr is only initializing pbdma_status
when either pbdma_intr_0 or pbdma_intr_1 is pending.
This could lead to using non-initialized chsw_status in
gv11b_fifo_preempt_poll_pbdma, and causing unexpected
failures in unit tests.
Read pbdma_status before checking for pbdma interrupts,
to make sure pbdma_status contains valid data.
Jira NVGPU-4887
Change-Id: If1bdb24ae04b58e85e4217c9c0854c01ca65525b
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/c/linux-nvgpu/+/2279111
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
